IDEAS home Printed from https://ideas.repec.org/a/eee/rensus/v188y2023ics1364032123006068.html
   My bibliography  Save this article

Converting methane into electricity and higher-value chemicals at scale via anaerobic microbial fuel cells

Author

Listed:
  • Wood, Thomas K.
  • Gurgan, Ilke
  • Howley, Ethan T.
  • Riedel-Kruse, Ingmar H.

Abstract

Methane (CH4) is the second most damaging greenhouse gas by absolute amounts released. Many globally distributed methane sources are of human origin, representing a significant untapped potential for capture and on-site conversion into electricity or ‘higher value’ chemicals. This study systematically and quantitatively analyzes the anaerobic oxidation of methane (AOM) in microbial fuel cells (MFCs) for generating electric power as well as analyzes AOM in bioreactors for producing value-added chemicals. The maximum performance of such systems is currently unknown. Based on biophysical arguments, power densities of 10 kW/m3 and more should be achievable, and Coulombic, carbon conversion, and energy conversion efficiency could reach 90%. Such performance is much higher than what is usually predicted. This AOM MFC approach promises higher efficiency, scalability, cost-effectiveness, and easier distribution compared to existing chemical plants or aerobic biological approaches. Yet achieving this requires significant and integrated advancement of different technologies. This analysis provides an accessible primer for the necessary interdisciplinary research effort, and discusses recent enabling biotechnological advancements, open research questions and corresponding R&D pathways, where enzyme and synthetic microbial consortia engineering, microfluidic technologies, membrane and electrode materials, modular system integration, and power optimization technology will likely be critical. In conclusion, AOM MFC is a very promising technology as the performance limits estimated here show, and if realized at scale, a significant impact on green-house gas reduction and sustainable, on-demand electricity and chemical (fuel) production could be achieved; this analysis could also aid the rational MFC design for other chemical reactions.

Suggested Citation

  • Wood, Thomas K. & Gurgan, Ilke & Howley, Ethan T. & Riedel-Kruse, Ingmar H., 2023. "Converting methane into electricity and higher-value chemicals at scale via anaerobic microbial fuel cells," Renewable and Sustainable Energy Reviews, Elsevier, vol. 188(C).
    • Handle: RePEc:eee:rensus:v:188:y:2023:i:c:s1364032123006068
    DOI: 10.1016/j.rser.2023.113749
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S1364032123006068
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.rser.2023.113749?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Lupangu, C. & Bansal, R.C., 2017. "A review of technical issues on the development of solar photovoltaic systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 73(C), pages 950-965.
    2. Wang, Chin-Tsan & Huang, Yan-Sian & Sangeetha, Thangavel & Yan, Wei-Mon, 2018. "Assessment of recirculation batch mode operation in bufferless Bio-cathode microbial Fuel Cells (MFCs)," Applied Energy, Elsevier, vol. 209(C), pages 120-126.
    3. Gunter Wegener & Viola Krukenberg & Dietmar Riedel & Halina E. Tegetmeyer & Antje Boetius, 2015. "Intercellular wiring enables electron transfer between methanotrophic archaea and bacteria," Nature, Nature, vol. 526(7574), pages 587-590, October.
    4. Honesty Kim & Dominic J. Skinner & David S. Glass & Alexander E. Hamby & Bradey A. R. Stuart & Jörn Dunkel & Ingmar H. Riedel-Kruse, 2022. "4-bit adhesion logic enables universal multicellular interface patterning," Nature, Nature, vol. 608(7922), pages 324-329, August.
    5. Trapero, Juan R. & Horcajada, Laura & Linares, Jose J. & Lobato, Justo, 2017. "Is microbial fuel cell technology ready? An economic answer towards industrial commercialization," Applied Energy, Elsevier, vol. 185(P1), pages 698-707.
    6. Michael J. McAnulty & Venkata G. Poosarla & Kyoung-Yeol Kim & Ricardo Jasso-Chávez & Bruce E. Logan & Thomas K. Wood, 2017. "Electricity from methane by reversing methanogenesis," Nature Communications, Nature, vol. 8(1), pages 1-8, August.
    7. Wang, Yun & Chen, Ken S. & Mishler, Jeffrey & Cho, Sung Chan & Adroher, Xavier Cordobes, 2011. "A review of polymer electrolyte membrane fuel cells: Technology, applications, and needs on fundamental research," Applied Energy, Elsevier, vol. 88(4), pages 981-1007, April.
    8. O'Connor, S. & Ehimen, E. & Pillai, S.C. & Black, A. & Tormey, D. & Bartlett, J., 2021. "Biogas production from small-scale anaerobic digestion plants on European farms," Renewable and Sustainable Energy Reviews, Elsevier, vol. 139(C).
    9. Seigo Shima & Martin Krueger & Tobias Weinert & Ulrike Demmer & Jörg Kahnt & Rudolf K. Thauer & Ulrich Ermler, 2012. "Structure of a methyl-coenzyme M reductase from Black Sea mats that oxidize methane anaerobically," Nature, Nature, vol. 481(7379), pages 98-101, January.
    10. E. Perry Murray & T. Tsai & S. A. Barnett, 1999. "A direct-methane fuel cell with a ceria-based anode," Nature, Nature, vol. 400(6745), pages 649-651, August.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Mohamad Fairus Rabuni & Tao Li & Mohd Hafiz Dzarfan Othman & Faidzul Hakim Adnan & Kang Li, 2023. "Progress in Solid Oxide Fuel Cells with Hydrocarbon Fuels," Energies, MDPI, vol. 16(17), pages 1-36, September.
    2. Wang, Yujie & Sun, Zhendong & Li, Xiyun & Yang, Xiaoyu & Chen, Zonghai, 2019. "A comparative study of power allocation strategies used in fuel cell and ultracapacitor hybrid systems," Energy, Elsevier, vol. 189(C).
    3. Peng, Fei & Zhao, Yuanzhe & Li, Xiaopeng & Liu, Zhixiang & Chen, Weirong & Liu, Yang & Zhou, Donghua, 2017. "Development of master-slave energy management strategy based on fuzzy logic hysteresis state machine and differential power processing compensation for a PEMFC-LIB-SC hybrid tramway," Applied Energy, Elsevier, vol. 206(C), pages 346-363.
    4. Zhang, Xiaoqing & Yang, Jiapei & Ma, Xiao & Zhuge, Weilin & Shuai, Shijin, 2022. "Modelling and analysis on effects of penetration of microporous layer into gas diffusion layer in PEM fuel cells: Focusing on mass transport," Energy, Elsevier, vol. 254(PA).
    5. Liao, Shuxin & Qiu, Diankai & Yi, Peiyun & Peng, Linfa & Lai, Xinmin, 2022. "Modeling of a novel cathode flow field design with optimized sub-channels to improve drainage for proton exchange membrane fuel cells," Energy, Elsevier, vol. 261(PB).
    6. Zheng Huang & Laisuo Su & Yunjie Yang & Linsong Gao & Xinyu Liu & Heng Huang & Yubai Li & Yongchen Song, 2023. "Three-Dimensional Simulation on the Effects of Different Parameters and Pt Loading on the Long-Term Performance of Proton Exchange Membrane Fuel Cells," Sustainability, MDPI, vol. 15(4), pages 1-22, February.
    7. Vasallo, Manuel Jesús & Bravo, José Manuel & Andújar, José Manuel, 2013. "Optimal sizing for UPS systems based on batteries and/or fuel cell," Applied Energy, Elsevier, vol. 105(C), pages 170-181.
    8. Eva Segura & Rafael Morales & José A. Somolinos, 2017. "Cost Assessment Methodology and Economic Viability of Tidal Energy Projects," Energies, MDPI, vol. 10(11), pages 1-27, November.
    9. Daidai Wu & Tiantian Sun & Rui Xie & Mengdi Pan & Xuegang Chen & Ying Ye & Lihua Liu & Nengyou Wu, 2019. "Characteristics of Authigenic Minerals around the Sulfate-Methane Transition Zone in the Methane-Rich Sediments of the Northern South China Sea: Inorganic Geochemical Evidence," IJERPH, MDPI, vol. 16(13), pages 1-18, June.
    10. Bae, Suk Joo & Kim, Seong-Joon & Lee, Jin-Hwa & Song, Inseob & Kim, Nam-In & Seo, Yongho & Kim, Ki Buem & Lee, Naesung & Park, Jun-Young, 2014. "Degradation pattern prediction of a polymer electrolyte membrane fuel cell stack with series reliability structure via durability data of single cells," Applied Energy, Elsevier, vol. 131(C), pages 48-55.
    11. Yan, Peijian & Tian, Pengfei & Cai, Cheng & Zhou, Shenghu & Yu, Xinhai & Zhao, Shuangliang & Tu, Shan-Tung & Deng, Chengwei & Sun, Yi, 2020. "Antioxidative and stable PdZn/ZnO/Al2O3 catalyst coatings concerning methanol steam reforming for fuel cell-powered vehicles," Applied Energy, Elsevier, vol. 268(C).
    12. Bolouri, Amir & Kang, Chung Gil, 2014. "Study on dimensional and corrosion properties of thixoformed A356 and AA7075 aluminum bipolar plates for proton exchange membrane fuel cells," Renewable Energy, Elsevier, vol. 71(C), pages 616-628.
    13. Rousseau, Raphaël & Etcheverry, Luc & Roubaud, Emma & Basséguy, Régine & Délia, Marie-Line & Bergel, Alain, 2020. "Microbial electrolysis cell (MEC): Strengths, weaknesses and research needs from electrochemical engineering standpoint," Applied Energy, Elsevier, vol. 257(C).
    14. Yue Teng & Ho Yeon Lee & Haesu Lee & Yoon Ho Lee, 2022. "Effect of Sputtering Pressure on the Nanostructure and Residual Stress of Thin-Film YSZ Electrolyte," Sustainability, MDPI, vol. 14(15), pages 1-9, August.
    15. Saranchimeg, Sainbold & Nair, Nirmal K.C., 2021. "A novel framework for integration analysis of large-scale photovoltaic plants into weak grids," Applied Energy, Elsevier, vol. 282(PA).
    16. Yuan, Wei & Tang, Yong & Yang, Xiaojun & Wan, Zhenping, 2012. "Porous metal materials for polymer electrolyte membrane fuel cells – A review," Applied Energy, Elsevier, vol. 94(C), pages 309-329.
    17. Luka Mihanović & Željko Penga & Lei Xing & Viktor Hacker, 2021. "Combining Baffles and Secondary Porous Layers for Performance Enhancement of Proton Exchange Membrane Fuel Cells," Energies, MDPI, vol. 14(12), pages 1-28, June.
    18. Shri Prakash, B. & Senthil Kumar, S. & Aruna, S.T., 2014. "Properties and development of Ni/YSZ as an anode material in solid oxide fuel cell: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 36(C), pages 149-179.
    19. Lin, Jui-Yen & Shih, Yu-Jen & Chen, Po-Yen & Huang, Yao-Hui, 2016. "Precipitation recovery of boron from aqueous solution by chemical oxo-precipitation at room temperature," Applied Energy, Elsevier, vol. 164(C), pages 1052-1058.
    20. Wang, Yujie & Sun, Zhendong & Chen, Zonghai, 2019. "Energy management strategy for battery/supercapacitor/fuel cell hybrid source vehicles based on finite state machine," Applied Energy, Elsevier, vol. 254(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:rensus:v:188:y:2023:i:c:s1364032123006068. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/600126/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.