IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v181y2022icp1-9.html
   My bibliography  Save this article

Heat collection performance analysis of corrugated flat plate collector: An experimental study

Author

Listed:
  • Liu, Yan
  • Tan, Chenchen
  • Jin, Yingai
  • Ma, Shihong

Abstract

Heat collection through flat plate collector is a common technology in solar thermal utilization. In order to improve the heat collection efficiency of flat plate collector and determine the best inclination angle and glass plate thickness, this paper establishes a collector indoor experimental system, and completes the research of solar radiation intensity, collector inclination angle, mass flow rate and glass thickness on the heat collection performance of corrugated flat plate collector. The result shows that when radiation intensity is 510W/m2, the temperature difference between the inlet and outlet in the radiation decreasing stage is 0.25 °C higher than the radiation increasing stage, and the heat collection in the radiation decreasing stage is 157.5W higher than the radiation increasing stage. The heat collection efficiency under different inclination angles decreases with the increase of radiation intensity, the best inclination angle of the collector is 45° and the maximum heat collection efficiency is 0.89. When the radiation intensity is more than 1000W/m2, heat collection of flat plate collector with glass thickness of 8 mm is 6% higher than that with the thickness of 6 mm, insulating effect of the glass is more obvious. The optimum thickness of the glass plate is 4 mm, the maximum temperature difference is 1.5 °C and the maximum heat collection efficiency is 0.89. The heat collection efficiency at different mass flow rates increases first and then decreases with the increase of radiation intensity. The maximum value of the heat collection efficiency at low mass flow rate is delayed. When the mass flow rate is 0.15 kg/s, 0.13 kg/s and 0.1 kg/s, the maximum heat collection efficiency is 0.89, 0.86 and 0.73, respectively; and the corresponding radiation intensity are 670W/m2, 850W/m2 and 1000W/m2, respectively.

Suggested Citation

  • Liu, Yan & Tan, Chenchen & Jin, Yingai & Ma, Shihong, 2022. "Heat collection performance analysis of corrugated flat plate collector: An experimental study," Renewable Energy, Elsevier, vol. 181(C), pages 1-9.
    • Handle: RePEc:eee:renene:v:181:y:2022:i:c:p:1-9
    DOI: 10.1016/j.renene.2021.09.001
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148121012994
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2021.09.001?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Anirudh, K. & Dhinakaran, S., 2020. "Performance improvement of a flat-plate solar collector by inserting intermittent porous blocks," Renewable Energy, Elsevier, vol. 145(C), pages 428-441.
    2. Diego-Ayala, U. & Carrillo, J.G., 2016. "Evaluation of temperature and efficiency in relation to mass flow on a solar flat plate collector in Mexico," Renewable Energy, Elsevier, vol. 96(PA), pages 756-764.
    3. Khoukhi, Maatouk & Maruyama, Shigenao, 2005. "Theoretical approach of a flat plate solar collector with clear and low-iron glass covers taking into account the spectral absorption and emission within glass covers layer," Renewable Energy, Elsevier, vol. 30(8), pages 1177-1194.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Natalia Rydalina & Elena Antonova & Irina Akhmetova & Svetlana Ilyashenko & Olga Afanaseva & Vincenzo Bianco & Alexander Fedyukhin, 2020. "Analysis of the Efficiency of Using Heat Exchangers with Porous Inserts in Heat and Gas Supply Systems," Energies, MDPI, vol. 13(22), pages 1-13, November.
    2. Sheikholeslami, M. & Farshad, Seyyed Ali & Shafee, Ahmad & Babazadeh, Houman, 2021. "Performance of solar collector with turbulator involving nanomaterial turbulent regime," Renewable Energy, Elsevier, vol. 163(C), pages 1222-1237.
    3. Rawal Diganjit & N. Gnanasekaran & Moghtada Mobedi, 2022. "Numerical Study for Enhancement of Heat Transfer Using Discrete Metal Foam with Varying Thickness and Porosity in Solar Air Heater by LTNE Method," Energies, MDPI, vol. 15(23), pages 1-28, November.
    4. Zhang, Xingxing & Shen, Jingchun & Lu, Yan & He, Wei & Xu, Peng & Zhao, Xudong & Qiu, Zhongzhu & Zhu, Zishang & Zhou, Jinzhi & Dong, Xiaoqiang, 2015. "Active Solar Thermal Facades (ASTFs): From concept, application to research questions," Renewable and Sustainable Energy Reviews, Elsevier, vol. 50(C), pages 32-63.
    5. Sharma, Harish Kumar & Kumar, Satish & Verma, Sujit Kumar, 2022. "Comparative performance analysis of flat plate solar collector having circular &trapezoidal corrugated absorber plate designs," Energy, Elsevier, vol. 253(C).
    6. Li, Chunying & Tang, Haida, 2020. "Evaluation on year-round performance of double-circulation water-flow window," Renewable Energy, Elsevier, vol. 150(C), pages 176-190.
    7. Anirudh, K. & Dhinakaran, S., 2020. "Numerical study on performance improvement of a flat-plate solar collector filled with porous foam," Renewable Energy, Elsevier, vol. 147(P1), pages 1704-1717.
    8. Fan, Yi & Zhao, Xudong & Han, Zhonghe & Li, Jing & Badiei, Ali & Akhlaghi, Yousef Golizadeh & Liu, Zhijian, 2021. "Scientific and technological progress and future perspectives of the solar assisted heat pump (SAHP) system," Energy, Elsevier, vol. 229(C).
    9. Yanfeng Liu & Tao Li & Yaowen Chen & Dengjia Wang, 2017. "Optimization of Solar Water Heating System under Time and Spatial Partition Heating in Rural Dwellings," Energies, MDPI, vol. 10(10), pages 1-19, October.
    10. Tabish Alam & Nagesh Babu Balam & Kishor Sitaram Kulkarni & Md Irfanul Haque Siddiqui & Nishant Raj Kapoor & Chandan Swaroop Meena & Ashok Kumar & Raffaello Cozzolino, 2021. "Performance Augmentation of the Flat Plate Solar Thermal Collector: A Review," Energies, MDPI, vol. 14(19), pages 1-23, September.
    11. Rawal Diganjit & Nagaranjan Gnanasekaran & Moghtada Mobedi, 2023. "Thermohydraulic Efficiency of a Solar Air Heater in the Presence of Graded Aluminium Wire Mesh—A Combined Experimental–Numerical Study," Energies, MDPI, vol. 16(15), pages 1-32, July.
    12. Xinwei Lin & Yongfang Xia & Zude Cheng & Xianshuang Liu & Yingmei Fu & Lingyun Li & Wenqin Zhou, 2024. "Thermal Performance Analysis of Porous Foam-Assisted Flat-Plate Solar Collectors with Nanofluids," Sustainability, MDPI, vol. 16(2), pages 1-26, January.
    13. Meng Liu & Shenghua Du & Qing Ai & Jiaming Gong & Yong Shuai, 2022. "Spectral Radiation Characteristic Measurements of Absorption and Scattering Semitransparent Materials—A Review," Energies, MDPI, vol. 15(23), pages 1-28, November.
    14. Alok Dayanand & Muhsin Aykapadathu & Nazmi Sellami & Mehdi Nazarinia, 2020. "Experimental Investigation of a Novel Absorptive/Reflective Solar Concentrator: A Thermal Analysis," Energies, MDPI, vol. 13(5), pages 1-16, March.
    15. Chen, Tianyu & Shu, Gequn & Tian, Hua & Zhao, Tingting & Zhang, Hongfei & Zhang, Zhao, 2020. "Performance evaluation of metal-foam baffle exhaust heat exchanger for waste heat recovery," Applied Energy, Elsevier, vol. 266(C).
    16. Anirudh, K. & Dhinakaran, S., 2021. "Numerical analysis of the performance improvement of a flat-plate solar collector using conjugated porous blocks," Renewable Energy, Elsevier, vol. 172(C), pages 382-391.
    17. Tian, Y. & Zhao, C.Y., 2013. "A review of solar collectors and thermal energy storage in solar thermal applications," Applied Energy, Elsevier, vol. 104(C), pages 538-553.
    18. Jouybari, Nima Fallah & Lundström, T. Staffan, 2020. "Performance improvement of a solar air heater by covering the absorber plate with a thin porous material," Energy, Elsevier, vol. 190(C).
    19. Sokhansefat, Tahmineh & Kasaeian, Alibakhsh & Rahmani, Kiana & Heidari, Ameneh Haji & Aghakhani, Faezeh & Mahian, Omid, 2018. "Thermoeconomic and environmental analysis of solar flat plate and evacuated tube collectors in cold climatic conditions," Renewable Energy, Elsevier, vol. 115(C), pages 501-508.
    20. Piotr Olczak & Dominika Matuszewska & Jadwiga Zabagło, 2020. "The Comparison of Solar Energy Gaining Effectiveness between Flat Plate Collectors and Evacuated Tube Collectors with Heat Pipe: Case Study," Energies, MDPI, vol. 13(7), pages 1-14, April.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:181:y:2022:i:c:p:1-9. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.