IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v179y2021icp2309-2321.html
   My bibliography  Save this article

Investigation on aerodynamic performance of horizontal axis wind turbine by setting micro-plate in front of the blade leading edge

Author

Listed:
  • Qi, Yinke
  • Xu, Shengyan
  • Huang, Diangui

Abstract

Under the pressure of conventional energy emergency and global environmental degradation, wind energy has been developed and utilized as an important energy source since 1973. However, flow separation occurs on the surface of horizontal axis wind turbine blades under high angle of attack, which reduces the utilization rate of wind energy. To address this problem, a method of setting micro-plate in front of the blade leading edge of the NREL Phase VI wind turbine is proposed, and the effects of the micro-plate at different positions and different plate widths on the aerodynamic performance of the wind turbine are investigated. The results show that distance between the micro-plate and the blade leading edge from the blade thickness direction and the chord length direction have significant effects on the aerodynamic performance of the blade, there is a position where the flow separation control effect is best. While in the same position, the control effect of micro-plate on the flow separation is different with different plate widths, and there is an optimal plate width at certain wind speeds, which makes the flow control effect the best.

Suggested Citation

  • Qi, Yinke & Xu, Shengyan & Huang, Diangui, 2021. "Investigation on aerodynamic performance of horizontal axis wind turbine by setting micro-plate in front of the blade leading edge," Renewable Energy, Elsevier, vol. 179(C), pages 2309-2321.
    • Handle: RePEc:eee:renene:v:179:y:2021:i:c:p:2309-2321
    DOI: 10.1016/j.renene.2021.08.035
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148121011952
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2021.08.035?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Wang, Ying & Li, Gaohui & Shen, Sheng & Huang, Diangui & Zheng, Zhongquan, 2018. "Investigation on aerodynamic performance of horizontal axis wind turbine by setting micro-cylinder in front of the blade leading edge," Energy, Elsevier, vol. 143(C), pages 1107-1124.
    2. Chamorro, Leonardo P. & Arndt, R.E.A. & Sotiropoulos, F., 2013. "Drag reduction of large wind turbine blades through riblets: Evaluation of riblet geometry and application strategies," Renewable Energy, Elsevier, vol. 50(C), pages 1095-1105.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Rasool, Safdar & Muttaqi, Kashem M. & Sutanto, Danny & Hemer, Mark, 2022. "Quantifying the reduction in power variability of co-located offshore wind-wave farms," Renewable Energy, Elsevier, vol. 185(C), pages 1018-1033.
    2. Azlan, F. & Tan, M.K. & Tan, B.T. & Ismadi, M.-Z., 2023. "Passive flow-field control using dimples for performance enhancement of horizontal axis wind turbine," Energy, Elsevier, vol. 271(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Azlan, F. & Tan, M.K. & Tan, B.T. & Ismadi, M.-Z., 2023. "Passive flow-field control using dimples for performance enhancement of horizontal axis wind turbine," Energy, Elsevier, vol. 271(C).
    2. Taurista P. Syawitri & Yufeng Yao & Jun Yao & Budi Chandra, 2022. "A review on the use of passive flow control devices as performance enhancement of lift‐type vertical axis wind turbines," Wiley Interdisciplinary Reviews: Energy and Environment, Wiley Blackwell, vol. 11(4), July.
    3. Sedighi, Hamed & Akbarzadeh, Pooria & Salavatipour, Ali, 2020. "Aerodynamic performance enhancement of horizontal axis wind turbines by dimples on blades: Numerical investigation," Energy, Elsevier, vol. 195(C).
    4. Guoqiang, Li & Weiguo, Zhang & Yubiao, Jiang & Pengyu, Yang, 2019. "Experimental investigation of dynamic stall flow control for wind turbine airfoils using a plasma actuator," Energy, Elsevier, vol. 185(C), pages 90-101.
    5. Wang, Peilin & Liu, Qingsong & Li, Chun & Miao, Weipao & Yue, Minnan & Xu, Zifei, 2022. "Investigation of the aerodynamic characteristics of horizontal axis wind turbine using an active flow control method via boundary layer suction," Renewable Energy, Elsevier, vol. 198(C), pages 1032-1048.
    6. Zhong, Junwei & Li, Jingyin & Liu, Huizhong, 2023. "Dynamic mode decomposition analysis of flow separation control on wind turbine airfoil using leading−edge rod," Energy, Elsevier, vol. 268(C).
    7. Wang, Ying & Li, Gaohui & Shen, Sheng & Huang, Diangui & Zheng, Zhongquan, 2018. "Investigation on aerodynamic performance of horizontal axis wind turbine by setting micro-cylinder in front of the blade leading edge," Energy, Elsevier, vol. 143(C), pages 1107-1124.
    8. Akhter, Md Zishan & Ali, Ahmed Riyadh & Jawahar, Hasan Kamliya & Omar, Farag Khalifa & Elnajjar, Emad, 2023. "Performance enhancement of small-scale wind turbine featuring morphing blades," Energy, Elsevier, vol. 278(C).
    9. Koca, Kemal & Genç, Mustafa Serdar & Ertürk, Sevde, 2022. "Impact of local flexible membrane on power efficiency stability at wind turbine blade," Renewable Energy, Elsevier, vol. 197(C), pages 1163-1173.
    10. Abdelsalam, Ali M. & El-Askary, W.A. & Kotb, M.A. & Sakr, I.M., 2021. "Experimental study on small scale horizontal axis wind turbine of analytically-optimized blade with linearized chord twist angle profile," Energy, Elsevier, vol. 216(C).
    11. Mostafa, Wafaa & Abdelsamie, Abouelmagd & Sedrak, Momtaz & Thévenin, Dominique & Mohamed, Mohamed H., 2022. "Quantitative impact of a micro-cylinder as a passive flow control on a horizontal axis wind turbine performance," Energy, Elsevier, vol. 244(PA).
    12. Zhang, Dongqin & Liu, Zhenqing & Li, Weipeng & Hu, Gang, 2023. "LES simulation study of wind turbine aerodynamic characteristics with fluid-structure interaction analysis considering blade and tower flexibility," Energy, Elsevier, vol. 282(C).
    13. Dang, Zhigao & Song, Baowei & Mao, Zhaoyong & Yang, Guangyong, 2022. "Performance analysis of a horizontal axis ocean current turbine with spanwise microgrooved surface," Renewable Energy, Elsevier, vol. 192(C), pages 655-667.
    14. Geng, Kaihe & Yang, Ce & Zhao, Ben & Zhao, Wei & Gao, Jianbing & Hu, Chenxing & Zhang, Hanzhi & Wu, Wangxia, 2023. "Residual circulation budget analysis in a Wells turbine with leading-edge micro-cylinders," Renewable Energy, Elsevier, vol. 216(C).
    15. Wang, Longjun & Alam, Md. Mahbub & Rehman, Shafiqur & Zhou, Yu, 2022. "Effects of blowing and suction jets on the aerodynamic performance of wind turbine airfoil," Renewable Energy, Elsevier, vol. 196(C), pages 52-64.
    16. Shi, Xuyang & Sun, Jinjing & Zhong, Shan & Huang, Diangui, 2021. "Flow control of a stalled S809 airfoil using an oscillating micro-cylinder at different angles of attack," Renewable Energy, Elsevier, vol. 175(C), pages 405-414.
    17. Riyadh Belamadi & Abdelhakim Settar & Khaled Chetehouna & Adrian Ilinca, 2022. "Numerical Modeling of Horizontal Axis Wind Turbine: Aerodynamic Performances Improvement Using an Efficient Passive Flow Control System," Energies, MDPI, vol. 15(13), pages 1-21, July.
    18. Zhu, Haitian & Hao, Wenxing & Li, Chun & Ding, Qinwei & Wu, Baihui, 2018. "A critical study on passive flow control techniques for straight-bladed vertical axis wind turbine," Energy, Elsevier, vol. 165(PA), pages 12-25.
    19. Gao, Linyue & Zhang, Hui & Liu, Yongqian & Han, Shuang, 2015. "Effects of vortex generators on a blunt trailing-edge airfoil for wind turbines," Renewable Energy, Elsevier, vol. 76(C), pages 303-311.
    20. Humam M. Salih & Mustafa A. Abdulhussain, 2019. "Drag Investigation Around A Cylinder And Symmetric Airfoil In Tandem With Different Gaps And Angles Of Attack," Journal of Mechanical Engineering Research & Developments (JMERD), Zibeline International Publishing, vol. 42(1), pages 26-33, January.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:179:y:2021:i:c:p:2309-2321. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.