IDEAS home Printed from https://ideas.repec.org/a/eee/proeco/v250y2022ics0925527322002031.html
   My bibliography  Save this article

A system dynamics archetype to mitigate rework effects in engineer-to-order supply chains

Author

Listed:
  • Zhou, Yuxuan
  • Wang, Xun
  • Naim, Mohamed M.
  • Gosling, Jonathan

Abstract

There are established archetypes that demonstrate the dynamic properties of make-to-order/stock and assemble-to-order production planning and inventory control systems and their impact on total on-costs, allowing for performance benchmarks to be established. However, the dynamic properties of engineer-to-order (ETO) production system, where products are designed and made to a specific customer order, are not well understood. Time and cost-overrun, poor capacity planning and high rates of rework are difficulties faced by ETO managers and, for now, solutions for these problems are still lacking.

Suggested Citation

  • Zhou, Yuxuan & Wang, Xun & Naim, Mohamed M. & Gosling, Jonathan, 2022. "A system dynamics archetype to mitigate rework effects in engineer-to-order supply chains," International Journal of Production Economics, Elsevier, vol. 250(C).
    • Handle: RePEc:eee:proeco:v:250:y:2022:i:c:s0925527322002031
    DOI: 10.1016/j.ijpe.2022.108620
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0925527322002031
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ijpe.2022.108620?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Gosling, Jonathan & Naim, Mohamed M., 2009. "Engineer-to-order supply chain management: A literature review and research agenda," International Journal of Production Economics, Elsevier, vol. 122(2), pages 741-754, December.
    2. Lin, J. & Naim, M.M. & Purvis, L. & Gosling, J., 2017. "The extension and exploitation of the inventory and order based production control system archetype from 1982 to 2015," International Journal of Production Economics, Elsevier, vol. 194(C), pages 135-152.
    3. Bajomo, Mary & Ogbeyemi, Akinola & Zhang, Wenjun, 2022. "A systems dynamics approach to the management of material procurement for Engineering, Procurement and Construction industry," International Journal of Production Economics, Elsevier, vol. 244(C).
    4. Aggelogiannaki, Eleni & Doganis, Philip & Sarimveis, Haralambos, 2008. "An adaptive model predictive control configuration for production-inventory systems," International Journal of Production Economics, Elsevier, vol. 114(1), pages 165-178, July.
    5. Alfnes, Erlend & Gosling, Jonathan & Naim, Mohamed & Dreyer, Heidi C., 2021. "Exploring systemic factors creating uncertainty in complex engineer-to-order supply chains: Case studies from Norwegian shipbuilding first tier suppliers," International Journal of Production Economics, Elsevier, vol. 240(C).
    6. Lin, Junyi & Naim, Mohamed M. & Spiegler, Virginia L.M., 2020. "Delivery time dynamics in an assemble-to-order inventory and order based production control system," International Journal of Production Economics, Elsevier, vol. 223(C).
    7. Disney, S. M. & Towill, D. R. & van de Velde, W., 2004. "Variance amplification and the golden ratio in production and inventory control," International Journal of Production Economics, Elsevier, vol. 90(3), pages 295-309, August.
    8. Wikner, Joakim & Naim, Mohamed M. & Spiegler, Virginia L.M. & Lin, Junyi, 2017. "IOBPCS based models and decoupling thinking," International Journal of Production Economics, Elsevier, vol. 194(C), pages 153-166.
    9. Cátia Barbosa & Américo Azevedo, 2019. "Assessing the impact of performance determinants in complex MTO/ETO supply chains through an extended hybrid modelling approach," International Journal of Production Research, Taylor & Francis Journals, vol. 57(11), pages 3577-3597, June.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Lin, Junyi & Huang, Hongfu & Li, Shanshan & Naim, Mohamed M., 2023. "On the dynamics of order pipeline inventory in a nonlinear order-up-to system," International Journal of Production Economics, Elsevier, vol. 266(C).
    2. Cannas, Violetta Giada & Gosling, Jonathan, 2021. "A decade of engineering-to-order (2010–2020): Progress and emerging themes," International Journal of Production Economics, Elsevier, vol. 241(C).
    3. Lin, Junyi & Zhou, Li & Spiegler, Virginia L.M. & Naim, Mohamed M. & Syntetos, Aris, 2022. "Push or Pull? The impact of ordering policy choice on the dynamics of a hybrid closed-loop supply chain," European Journal of Operational Research, Elsevier, vol. 300(1), pages 282-295.
    4. Yang, Y. & Lin, J. & Liu, G. & Zhou, L., 2021. "The behavioural causes of bullwhip effect in supply chains: A systematic literature review," International Journal of Production Economics, Elsevier, vol. 236(C).
    5. Lin, Junyi & Naim, Mohamed M. & Spiegler, Virginia L.M., 2020. "Delivery time dynamics in an assemble-to-order inventory and order based production control system," International Journal of Production Economics, Elsevier, vol. 223(C).
    6. Spiegler, Virginia L.M. & Naim, Mohamed M., 2017. "Investigating sustained oscillations in nonlinear production and inventory control models," European Journal of Operational Research, Elsevier, vol. 261(2), pages 572-583.
    7. Huthaifa AL-Khazraji & Colin Cole & William Guo, 2021. "Optimization and Simulation of Dynamic Performance of Production–Inventory Systems with Multivariable Controls," Mathematics, MDPI, vol. 9(5), pages 1-13, March.
    8. Ponte, Borja & Framinan, Jose M. & Cannella, Salvatore & Dominguez, Roberto, 2020. "Quantifying the Bullwhip Effect in closed-loop supply chains: The interplay of information transparencies, return rates, and lead times," International Journal of Production Economics, Elsevier, vol. 230(C).
    9. Ciancimino, Elena & Cannella, Salvatore & Bruccoleri, Manfredi & Framinan, Jose M., 2012. "On the Bullwhip Avoidance Phase: The Synchronised Supply Chain," European Journal of Operational Research, Elsevier, vol. 221(1), pages 49-63.
    10. Ma, Yungao & Wang, Nengmin & He, Zhengwen & Lu, Jizhou & Liang, Huigang, 2015. "Analysis of the bullwhip effect in two parallel supply chains with interacting price-sensitive demands," European Journal of Operational Research, Elsevier, vol. 243(3), pages 815-825.
    11. Pero, Margherita & Stößlein, Martin & Cigolini, Roberto, 2015. "Linking product modularity to supply chain integration in the construction and shipbuilding industries," International Journal of Production Economics, Elsevier, vol. 170(PB), pages 602-615.
    12. Schwartz, Jay D. & Rivera, Daniel E., 2010. "A process control approach to tactical inventory management in production-inventory systems," International Journal of Production Economics, Elsevier, vol. 125(1), pages 111-124, May.
    13. Sandrin, Enrico & Trentin, Alessio & Forza, Cipriano, 2018. "Leveraging high-involvement practices to develop mass customization capability: A contingent configurational perspective," International Journal of Production Economics, Elsevier, vol. 196(C), pages 335-345.
    14. Daniela D. Viana & Iris D. Tommelein & Carlos T. Formoso, 2017. "Using Modularity to Reduce Complexity of Industrialized Building Systems for Mass Customization," Energies, MDPI, vol. 10(10), pages 1-17, October.
    15. Kastsian, Darya & Mönnigmann, Martin, 2011. "Optimization of a vendor managed inventory supply chain with guaranteed stability and robustness," International Journal of Production Economics, Elsevier, vol. 131(2), pages 727-735, June.
    16. Lina Tang & Taho Yang & Yiliu Tu & Yizhong Ma, 2021. "Supply chain information sharing under consideration of bullwhip effect and system robustness," Flexible Services and Manufacturing Journal, Springer, vol. 33(2), pages 337-380, June.
    17. Youbin KANG, 2021. "The rise, demise and replacement of the Bangladesh experiment in transnational labour regulation," International Labour Review, International Labour Organization, vol. 160(3), pages 407-430, September.
    18. Caloiero, Giuliano & Strozzi, Fernanda & Zaldívar Comenges, José-Manuel, 2008. "A supply chain as a series of filters or amplifiers of the bullwhip effect," International Journal of Production Economics, Elsevier, vol. 114(2), pages 631-645, August.
    19. Neumann, Anas & Hajji, Adnene & Rekik, Monia & Pellerin, Robert, 2022. "A model for advanced planning systems dedicated to the Engineer-To-Order context," International Journal of Production Economics, Elsevier, vol. 252(C).
    20. Ponte, Borja & Puche, Julio & Rosillo, Rafael & de la Fuente, David, 2020. "The effects of quantity discounts on supply chain performance: Looking through the Bullwhip lens," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 143(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:proeco:v:250:y:2022:i:c:s0925527322002031. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/ijpe .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.