IDEAS home Printed from https://ideas.repec.org/a/eee/proeco/v230y2020ics0925527320301742.html
   My bibliography  Save this article

Quantifying the Bullwhip Effect in closed-loop supply chains: The interplay of information transparencies, return rates, and lead times

Author

Listed:
  • Ponte, Borja
  • Framinan, Jose M.
  • Cannella, Salvatore
  • Dominguez, Roberto

Abstract

The Bullwhip Effect manifests itself in the form of an increased order and inventory variability in the uppermost nodes of the supply chain. This dynamic phenomenon is not yet well understood in closed-loop supply chain settings, despite their growing importance in modern societies pursuing circular economy opportunities. Indeed, the problem-specific literature has provided somewhat conflicting findings. To better understand the Bullwhip Effect in closed-loop systems, we obtain expressions for the order and inventory variance amplification in four archetypes that differ in the structure of information transparency. Interestingly, we observe that the impact of return rates and lead times on the system performance strongly depend on the degree of supply chain visibility. This perspective allows us to revisit discrepancies in prior works. We later move the study from the operational to the economic prism. Here we prove the existence of an optimal return rate, and we derive its expression in the four closed-loop supply chain archetypes. We show that the optimal rate is dependent on the node’s cost structure, the lead times, and the variability of demand. Properties of the different closed-loop systems and relevant managerial implications are also discussed in our work.

Suggested Citation

  • Ponte, Borja & Framinan, Jose M. & Cannella, Salvatore & Dominguez, Roberto, 2020. "Quantifying the Bullwhip Effect in closed-loop supply chains: The interplay of information transparencies, return rates, and lead times," International Journal of Production Economics, Elsevier, vol. 230(C).
  • Handle: RePEc:eee:proeco:v:230:y:2020:i:c:s0925527320301742
    DOI: 10.1016/j.ijpe.2020.107798
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0925527320301742
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.ijpe.2020.107798?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Giutini, Ron & Gaudette, Kevin, 2003. "Remanufacturing: The next great opportunity for boosting US productivity," Business Horizons, Elsevier, vol. 46(6), pages 41-48.
    2. Zhou, Li & Naim, Mohamed M. & Disney, Stephen M., 2017. "The impact of product returns and remanufacturing uncertainties on the dynamic performance of a multi-echelon closed-loop supply chain," International Journal of Production Economics, Elsevier, vol. 183(PB), pages 487-502.
    3. Hau L. Lee & Kut C. So & Christopher S. Tang, 2000. "The Value of Information Sharing in a Two-Level Supply Chain," Management Science, INFORMS, vol. 46(5), pages 626-643, May.
    4. Thanos E. Goltsos & Borja Ponte & Shixuan Wang & Ying Liu & Mohamed M. Naim & Aris A. Syntetos, 2019. "The boomerang returns? Accounting for the impact of uncertainties on the dynamics of remanufacturing systems," International Journal of Production Research, Taylor & Francis Journals, vol. 57(23), pages 7361-7394, December.
    5. Srinivasan Raghunathan, 2001. "Information Sharing in a Supply Chain: A Note on its Value when Demand Is Nonstationary," Management Science, INFORMS, vol. 47(4), pages 605-610, April.
    6. Lin, J. & Naim, M.M. & Purvis, L. & Gosling, J., 2017. "The extension and exploitation of the inventory and order based production control system archetype from 1982 to 2015," International Journal of Production Economics, Elsevier, vol. 194(C), pages 135-152.
    7. Hosoda, Takamichi & Disney, Stephen M., 2018. "A unified theory of the dynamics of closed-loop supply chains," European Journal of Operational Research, Elsevier, vol. 269(1), pages 313-326.
    8. Reimann, Marc & Xiong, Yu & Zhou, Yu, 2019. "Managing a closed-loop supply chain with process innovation for remanufacturing," European Journal of Operational Research, Elsevier, vol. 276(2), pages 510-518.
    9. Hosoda, Takamichi & Disney, Stephen M., 2009. "Impact of market demand mis-specification on a two-level supply chain," International Journal of Production Economics, Elsevier, vol. 121(2), pages 739-751, October.
    10. Teunter, Ruud H. & Babai, M. Zied & Bokhorst, Jos A.C. & Syntetos, Aris A., 2018. "Revisiting the value of information sharing in two-stage supply chains," European Journal of Operational Research, Elsevier, vol. 270(3), pages 1044-1052.
    11. Borja Ponte & Xun Wang & David de la Fuente & Stephen M. Disney, 2017. "Exploring nonlinear supply chains: the dynamics of capacity constraints," International Journal of Production Research, Taylor & Francis Journals, vol. 55(14), pages 4053-4067, July.
    12. Chatfield, Dean C. & Pritchard, Alan M., 2013. "Returns and the bullwhip effect," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 49(1), pages 159-175.
    13. Govindan, Kannan & Soleimani, Hamed & Kannan, Devika, 2015. "Reverse logistics and closed-loop supply chain: A comprehensive review to explore the future," European Journal of Operational Research, Elsevier, vol. 240(3), pages 603-626.
    14. James D. Abbey & V. Daniel R. Guide, 2018. "A typology of remanufacturing in closed-loop supply chains," International Journal of Production Research, Taylor & Francis Journals, vol. 56(1-2), pages 374-384, January.
    15. V. Daniel R. Guide & Terry P. Harrison & Luk N. Van Wassenhove, 2003. "The Challenge of Closed-Loop Supply Chains," Interfaces, INFORMS, vol. 33(6), pages 3-6, December.
    16. Ponte, Borja & Costas, José & Puche, Julio & Pino, Raúl & de la Fuente, David, 2018. "The value of lead time reduction and stabilization: A comparison between traditional and collaborative supply chains," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 111(C), pages 165-185.
    17. Frank Chen & Jennifer K. Ryan & David Simchi‐Levi, 2000. "The impact of exponential smoothing forecasts on the bullwhip effect," Naval Research Logistics (NRL), John Wiley & Sons, vol. 47(4), pages 269-286, June.
    18. Dev, Navin K. & Shankar, Ravi & Choudhary, Alok, 2017. "Strategic design for inventory and production planning in closed-loop hybrid systems," International Journal of Production Economics, Elsevier, vol. 183(PB), pages 345-353.
    19. S Cannella & A P Barbosa-Póvoa & J M Framinan & S Relvas, 2013. "Metrics for bullwhip effect analysis," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 64(1), pages 1-16, January.
    20. Inderfurth, Karl & van der Laan, Erwin, 2001. "Leadtime effects and policy improvement for stochastic inventory control with remanufacturing," International Journal of Production Economics, Elsevier, vol. 71(1-3), pages 381-390, May.
    21. Disney, Stephen M. & Lambrecht, Marc R., 2008. "On Replenishment Rules, Forecasting, and the Bullwhip Effect in Supply Chains," Foundations and Trends(R) in Technology, Information and Operations Management, now publishers, vol. 2(1), pages 1-80, April.
    22. Adenso-Díaz, Belarmino & Moreno, Plácido & Gutiérrez, Ester & Lozano, Sebastián, 2012. "An analysis of the main factors affecting bullwhip in reverse supply chains," International Journal of Production Economics, Elsevier, vol. 135(2), pages 917-928.
    23. Dejonckheere, J. & Disney, S. M. & Lambrecht, M. R. & Towill, D. R., 2003. "Measuring and avoiding the bullwhip effect: A control theoretic approach," European Journal of Operational Research, Elsevier, vol. 147(3), pages 567-590, June.
    24. Genovese, Andrea & Acquaye, Adolf A. & Figueroa, Alejandro & Koh, S.C. Lenny, 2017. "Sustainable supply chain management and the transition towards a circular economy: Evidence and some applications," Omega, Elsevier, vol. 66(PB), pages 344-357.
    25. Isaksson, Olov H.D. & Seifert, Ralf W., 2016. "Quantifying the bullwhip effect using two-echelon data: A cross-industry empirical investigation," International Journal of Production Economics, Elsevier, vol. 171(P3), pages 311-320.
    26. Zhou, Li & Naim, Mohamed M. & Ou Tang & Towill, Denis R., 2006. "Dynamic performance of a hybrid inventory system with a Kanban policy in remanufacturing process," Omega, Elsevier, vol. 34(6), pages 585-598, December.
    27. Ponte, Borja & Naim, Mohamed M. & Syntetos, Aris A., 2019. "The value of regulating returns for enhancing the dynamic behaviour of hybrid manufacturing-remanufacturing systems," European Journal of Operational Research, Elsevier, vol. 278(2), pages 629-645.
    28. Disney, S. M. & Towill, D. R. & van de Velde, W., 2004. "Variance amplification and the golden ratio in production and inventory control," International Journal of Production Economics, Elsevier, vol. 90(3), pages 295-309, August.
    29. Hau L. Lee & V. Padmanabhan & Seungjin Whang, 1997. "Information Distortion in a Supply Chain: The Bullwhip Effect," Management Science, INFORMS, vol. 43(4), pages 546-558, April.
    30. Wang, Xun & Disney, Stephen M., 2016. "The bullwhip effect: Progress, trends and directions," European Journal of Operational Research, Elsevier, vol. 250(3), pages 691-701.
    31. Cannella, Salvatore & Bruccoleri, Manfredi & Framinan, Jose M., 2016. "Closed-loop supply chains: What reverse logistics factors influence performance?," International Journal of Production Economics, Elsevier, vol. 175(C), pages 35-49.
    32. Dominguez, Roberto & Cannella, Salvatore & Framinan, Jose M., 2015. "On returns and network configuration in supply chain dynamics," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 73(C), pages 152-167.
    33. Hosoda, Takamichi & Disney, Stephen M. & Gavirneni, Srinagesh, 2015. "The impact of information sharing, random yield, correlation, and lead times in closed loop supply chains," European Journal of Operational Research, Elsevier, vol. 246(3), pages 827-836.
    34. Frank Chen & Zvi Drezner & Jennifer K. Ryan & David Simchi-Levi, 2000. "Quantifying the Bullwhip Effect in a Simple Supply Chain: The Impact of Forecasting, Lead Times, and Information," Management Science, INFORMS, vol. 46(3), pages 436-443, March.
    35. Dejonckheere, J. & Disney, S. M. & Lambrecht, M. R. & Towill, D. R., 2004. "The impact of information enrichment on the Bullwhip effect in supply chains: A control engineering perspective," European Journal of Operational Research, Elsevier, vol. 153(3), pages 727-750, March.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Chiang, Chung-Yean & Qian, Zhuang & Chuang, Chia-Hung & Tang, Xiao & Chou, Chia-Ching, 2023. "Examining demand and supply-chain antecedents of inventory dynamics: Evidence from automotive industry," International Journal of Production Economics, Elsevier, vol. 259(C).
    2. Dejian Yu & Zhaoping Yan, 2021. "Knowledge diffusion of supply chain bullwhip effect: main path analysis and science mapping analysis," Scientometrics, Springer;Akadémiai Kiadó, vol. 126(10), pages 8491-8515, October.
    3. Scarpin, Marcia Regina Santiago & Scarpin, Jorge Eduardo & Krespi Musial, Nayane Thais & Nakamura, Wilson Toshiro, 2022. "The implications of COVID-19: Bullwhip and ripple effects in global supply chains," International Journal of Production Economics, Elsevier, vol. 251(C).
    4. Rajeev Rathi & Dattatraya Balasaheb Sabale & Jiju Antony & Mahender Singh Kaswan & Raja Jayaraman, 2022. "An Analysis of Circular Economy Deployment in Developing Nations’ Manufacturing Sector: A Systematic State-of-the-Art Review," Sustainability, MDPI, vol. 14(18), pages 1-23, September.
    5. Ponte, Borja & Cannella, Salvatore & Dominguez, Roberto & Naim, Mohamed M. & Syntetos, Aris A., 2021. "Quality grading of returns and the dynamics of remanufacturing," International Journal of Production Economics, Elsevier, vol. 236(C).
    6. Lin, Junyi & Zhou, Li & Spiegler, Virginia L.M. & Naim, Mohamed M. & Syntetos, Aris, 2022. "Push or Pull? The impact of ordering policy choice on the dynamics of a hybrid closed-loop supply chain," European Journal of Operational Research, Elsevier, vol. 300(1), pages 282-295.
    7. María Arquer & Borja Ponte & Raúl Pino, 2022. "Examining the balance between efficiency and resilience in closed-loop supply chains," Central European Journal of Operations Research, Springer;Slovak Society for Operations Research;Hungarian Operational Research Society;Czech Society for Operations Research;Österr. Gesellschaft für Operations Research (ÖGOR);Slovenian Society Informatika - Section for Operational Research;Croatian Operational Research Society, vol. 30(4), pages 1307-1336, December.
    8. Simone Sehnem & Adriane A. Farias S. L. de Queiroz & Susana Carla Farias Pereira & Gabriel dos Santos Correia & Edson Kuzma, 2022. "Circular economy and innovation: A look from the perspective of organizational capabilities," Business Strategy and the Environment, Wiley Blackwell, vol. 31(1), pages 236-250, January.
    9. Yang, Y. & Lin, J. & Hedenstierna, C.P.T. & Zhou, L., 2023. "The more the better? The impact of the number and location of product recovery options on the system dynamics in a closed-loop supply chain," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 175(C).
    10. Gunasekara, Lahiru & Robb, David J. & Zhang, Abraham, 2023. "Used product acquisition, sorting and disposition for circular supply chains: Literature review and research directions," International Journal of Production Economics, Elsevier, vol. 260(C).
    11. Hosoda, Takamichi & Disney, Stephen M. & Zhou, Li, 2021. "The yield rate paradox in closed-loop supply chains," International Journal of Production Economics, Elsevier, vol. 239(C).
    12. Christos I. Papanagnou, 2022. "Measuring and eliminating the bullwhip in closed loop supply chains using control theory and Internet of Things," Annals of Operations Research, Springer, vol. 310(1), pages 153-170, March.
    13. Ponte, Borja & Dominguez, Roberto & Cannella, Salvatore & Framinan, Jose M., 2022. "The implications of batching in the bullwhip effect and customer service of closed-loop supply chains," International Journal of Production Economics, Elsevier, vol. 244(C).
    14. Ahmad, Farhan & Bask, Anu & Laari, Sini & Robinson, Craig V., 2023. "Business management perspectives on the circular economy: Present state and future directions," Technological Forecasting and Social Change, Elsevier, vol. 187(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Dominguez, Roberto & Cannella, Salvatore & Framinan, Jose M., 2021. "Remanufacturing configuration in complex supply chains," Omega, Elsevier, vol. 101(C).
    2. Ponte, Borja & Cannella, Salvatore & Dominguez, Roberto & Naim, Mohamed M. & Syntetos, Aris A., 2021. "Quality grading of returns and the dynamics of remanufacturing," International Journal of Production Economics, Elsevier, vol. 236(C).
    3. Dominguez, Roberto & Cannella, Salvatore & Ponte, Borja & Framinan, Jose M., 2020. "On the dynamics of closed-loop supply chains under remanufacturing lead time variability," Omega, Elsevier, vol. 97(C).
    4. Ponte, Borja & Dominguez, Roberto & Cannella, Salvatore & Framinan, Jose M., 2022. "The implications of batching in the bullwhip effect and customer service of closed-loop supply chains," International Journal of Production Economics, Elsevier, vol. 244(C).
    5. Ponte, Borja & Naim, Mohamed M. & Syntetos, Aris A., 2019. "The value of regulating returns for enhancing the dynamic behaviour of hybrid manufacturing-remanufacturing systems," European Journal of Operational Research, Elsevier, vol. 278(2), pages 629-645.
    6. María Arquer & Borja Ponte & Raúl Pino, 2022. "Examining the balance between efficiency and resilience in closed-loop supply chains," Central European Journal of Operations Research, Springer;Slovak Society for Operations Research;Hungarian Operational Research Society;Czech Society for Operations Research;Österr. Gesellschaft für Operations Research (ÖGOR);Slovenian Society Informatika - Section for Operational Research;Croatian Operational Research Society, vol. 30(4), pages 1307-1336, December.
    7. Hosoda, Takamichi & Disney, Stephen M. & Zhou, Li, 2021. "The yield rate paradox in closed-loop supply chains," International Journal of Production Economics, Elsevier, vol. 239(C).
    8. Lin, Junyi & Zhou, Li & Spiegler, Virginia L.M. & Naim, Mohamed M. & Syntetos, Aris, 2022. "Push or Pull? The impact of ordering policy choice on the dynamics of a hybrid closed-loop supply chain," European Journal of Operational Research, Elsevier, vol. 300(1), pages 282-295.
    9. Ponte, Borja & Puche, Julio & Rosillo, Rafael & de la Fuente, David, 2020. "The effects of quantity discounts on supply chain performance: Looking through the Bullwhip lens," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 143(C).
    10. Ahmed Shaban & Mohamed A. Shalaby & Giulio Di Gravio & Riccardo Patriarca, 2020. "Analysis of Variance Amplification and Service Level in a Supply Chain with Correlated Demand," Sustainability, MDPI, vol. 12(16), pages 1-27, August.
    11. Wang, Xun & Disney, Stephen M., 2016. "The bullwhip effect: Progress, trends and directions," European Journal of Operational Research, Elsevier, vol. 250(3), pages 691-701.
    12. Ponte, Borja & Costas, José & Puche, Julio & Pino, Raúl & de la Fuente, David, 2018. "The value of lead time reduction and stabilization: A comparison between traditional and collaborative supply chains," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 111(C), pages 165-185.
    13. Yang, Y. & Lin, J. & Hedenstierna, C.P.T. & Zhou, L., 2023. "The more the better? The impact of the number and location of product recovery options on the system dynamics in a closed-loop supply chain," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 175(C).
    14. Lin, Junyi & Huang, Hongfu & Li, Shanshan & Naim, Mohamed M., 2023. "On the dynamics of order pipeline inventory in a nonlinear order-up-to system," International Journal of Production Economics, Elsevier, vol. 266(C).
    15. Roberto Dominguez & Salvatore Cannella & Borja Ponte & Jose M. Framinan, 2022. "Information sharing in decentralised supply chains with partial collaboration," Flexible Services and Manufacturing Journal, Springer, vol. 34(2), pages 263-292, June.
    16. Dominguez, Roberto & Cannella, Salvatore & Barbosa-Póvoa, Ana P. & Framinan, Jose M., 2018. "OVAP: A strategy to implement partial information sharing among supply chain retailers," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 110(C), pages 122-136.
    17. Cannella, Salvatore & Dominguez, Roberto & Ponte, Borja & Framinan, Jose M., 2018. "Capacity restrictions and supply chain performance: Modelling and analysing load-dependent lead times," International Journal of Production Economics, Elsevier, vol. 204(C), pages 264-277.
    18. Cannella, Salvatore & Bruccoleri, Manfredi & Framinan, Jose M., 2016. "Closed-loop supply chains: What reverse logistics factors influence performance?," International Journal of Production Economics, Elsevier, vol. 175(C), pages 35-49.
    19. Cannella, Salvatore & Dominguez, Roberto & Framinan, Jose M., 2017. "Inventory record inaccuracy – The impact of structural complexity and lead time variability," Omega, Elsevier, vol. 68(C), pages 123-138.
    20. Rostami-Tabar, Bahman & Disney, Stephen M., 2023. "On the order-up-to policy with intermittent integer demand and logically consistent forecasts," International Journal of Production Economics, Elsevier, vol. 257(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:proeco:v:230:y:2020:i:c:s0925527320301742. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/ijpe .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.