IDEAS home Printed from https://ideas.repec.org/a/eee/jrpoli/v52y2017icp235-244.html
   My bibliography  Save this article

Assessment of potential copper scrap in China and policy recommendation

Author

Listed:
  • Wang, Minxi
  • Chen, Wu
  • Zhou, Yang
  • Li, Xin

Abstract

This paper investigated dynamic behavior of China's potential copper scrap generation based on previous consumption. China has consumed refined copper up to 95 million ton (Mt) for economic development from 1949 to 2013, which is mainly concentrated in equipment (36%) and infrastructure (45%). During the period, only 16% of consumed copper (about 15.5Mt) transformed to scrap and others were still in in-use stocks. While from 2014 to 2022, generated scrap is almost 1.2 times (about 18.3Mt) as much as that before 2013, over 50% of which are from equipment. This is due to majority of refined copper is consumed during the past decade. Therefore China would face explosive increasing scrap generation in the next two or three decades for temporal delay of social economic system. The ratio of recycling efficiency rate (RER) increased all the time and it's high to 58% in 2013. Although recycling copper scrap can conserve energy and reduce emission, it accompanied by some issues for increasingly complex composition. To alleviate the problem of copper shortage and make full use of huge potential scrap resources, some policy recommendations are put forward for the Chinese government: (1) Adjust copper resource policy and pay more attention to copper recycling industry. (2) Develop copper recycling industries to accommodate explosively increasing scrap and enforce extended producer responsibilities to recycle equipment by the way of reusing, remanufacturing and recycling etc. (3) For environmental and social problems, gradually guide copper recycling industry optimization. Make full use of rural-urban surplus labor force to construct social recycling network and encourage copper recycling enterprises improve technology and optimize plant design to reach the level of cleaner production.

Suggested Citation

  • Wang, Minxi & Chen, Wu & Zhou, Yang & Li, Xin, 2017. "Assessment of potential copper scrap in China and policy recommendation," Resources Policy, Elsevier, vol. 52(C), pages 235-244.
    • Handle: RePEc:eee:jrpoli:v:52:y:2017:i:c:p:235-244
    DOI: 10.1016/j.resourpol.2016.12.009
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S030142071630232X
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.resourpol.2016.12.009?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. McMillan, Colin A. & Moore, Michael R. & Keoleian, Gregory A. & Bulkley, Jonathan W., 2010. "Quantifying U.S. aluminum in-use stocks and their relationship with economic output," Ecological Economics, Elsevier, vol. 69(12), pages 2606-2613, October.
    2. Tilton, John E. & Lagos, Gustavo, 2007. "Assessing the long-run availability of copper," Resources Policy, Elsevier, vol. 32(1-2), pages 19-23.
    3. Jaunky, Vishal Chandr, 2013. "A cointegration and causality analysis of copper consumption and economic growth in rich countries," Resources Policy, Elsevier, vol. 38(4), pages 628-639.
    4. Spatari, S. & Bertram, M. & Gordon, Robert B. & Henderson, K. & Graedel, T.E., 2005. "Twentieth century copper stocks and flows in North America: A dynamic analysis," Ecological Economics, Elsevier, vol. 54(1), pages 37-51, July.
    5. Elshkaki, Ayman, 2013. "An analysis of future platinum resources, emissions and waste streams using a system dynamic model of its intentional and non-intentional flows and stocks," Resources Policy, Elsevier, vol. 38(3), pages 241-251.
    6. Ling Zhang & Zengwei Yuan & Jun Bi, 2012. "Estimation of Copper In‐use Stocks in Nanjing, China," Journal of Industrial Ecology, Yale University, vol. 16(2), pages 191-202, April.
    7. Yue, Qiang & Wang, Heming & Gao, Chengkang & Du, Tao & Li, Mingjun & Lu, Zhongwu, 2016. "Analysis of iron in-use stocks in China," Resources Policy, Elsevier, vol. 49(C), pages 315-322.
    8. Graedel, T. E. & Bertram, M. & Fuse, K. & Gordon, R. B. & Lifset, R. & Rechberger, H. & Spatari, S., 2002. "The contemporary European copper cycle: The characterization of technological copper cycles," Ecological Economics, Elsevier, vol. 42(1-2), pages 9-26, August.
    9. Elshkaki, Ayman & van der Voet, Ester & Timmermans, Veerle & Van Holderbeke, Mirja, 2005. "Dynamic stock modelling: A method for the identification and estimation of future waste streams and emissions based on past production and product stock characteristics," Energy, Elsevier, vol. 30(8), pages 1353-1363.
    10. Chen, Wei-Qiang & Graedel, T.E., 2012. "Dynamic analysis of aluminum stocks and flows in the United States: 1900–2009," Ecological Economics, Elsevier, vol. 81(C), pages 92-102.
    11. Gomez, Fernando & Guzman, Juan Ignacio & Tilton, John E., 2007. "Copper recycling and scrap availability," Resources Policy, Elsevier, vol. 32(4), pages 183-190, December.
    12. Bertram, M. & Graedel, T. E. & Rechberger, H. & Spatari, S., 2002. "The contemporary European copper cycle: waste management subsystem," Ecological Economics, Elsevier, vol. 42(1-2), pages 43-57, August.
    13. Spatari, S. & Bertram, M. & Fuse, K. & Graedel, T. E. & Rechberger, H., 2002. "The contemporary European copper cycle: 1 year stocks and flows," Ecological Economics, Elsevier, vol. 42(1-2), pages 27-42, August.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Rivera, Nilza & Guzmán, Juan Ignacio & Jara, José Joaquín & Lagos, Gustavo, 2021. "Evaluation of econometric models of secondary refined copper supply," Resources Policy, Elsevier, vol. 73(C).
    2. Luo, Hongyuan & Wang, Deyun & Cheng, Jinhua & Wu, Qiaosheng, 2022. "Multi-step-ahead copper price forecasting using a two-phase architecture based on an improved LSTM with novel input strategy and error correction," Resources Policy, Elsevier, vol. 79(C).
    3. Nilza Rivera & Juan Ignacio Guzmán & Gustavo Lagos, 2023. "A method to estimate the robustness of the secondary refined copper supply function," Mineral Economics, Springer;Raw Materials Group (RMG);Luleå University of Technology, vol. 36(2), pages 255-277, June.
    4. Yang Li & Kiyoshi Fujikawa & Junbo Wang & Xin Li & Yiyi Ju & Chenyi Chen, 2020. "The Potential and Trend of End-Of-Life Passenger Vehicles Recycling in China," Sustainability, MDPI, vol. 12(4), pages 1-13, February.
    5. Becerra, Miguel & Jerez, Alejandro & Garcés, Hugo O. & Demarco, Rodrigo, 2022. "Copper price: A brief analysis of China’s impact over its short-term forecasting," Resources Policy, Elsevier, vol. 75(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Chen, Wu & Wang, Minxi & Li, Xin, 2016. "Analysis of copper flows in the United States: 1975–2012," Resources, Conservation & Recycling, Elsevier, vol. 111(C), pages 67-76.
    2. Fu, Xinkai & Ueland, Stian M. & Olivetti, Elsa, 2017. "Econometric modeling of recycled copper supply," Resources, Conservation & Recycling, Elsevier, vol. 122(C), pages 219-226.
    3. Klinglmair, Manfred & Fellner, Johann, 2011. "Historical iron and steel recovery in times of raw material shortage: The case of Austria during World War I," Ecological Economics, Elsevier, vol. 72(C), pages 179-187.
    4. Guo, Tianjiao & Geng, Yong & Song, Xiaoqian & Rui, Xue & Ge, Zewen, 2023. "Tracing magnesium flows in China: A dynamic material flow analysis," Resources Policy, Elsevier, vol. 83(C).
    5. Luca Ciacci & Ivano Vassura & Fabrizio Passarini, 2017. "Urban Mines of Copper: Size and Potential for Recycling in the EU," Resources, MDPI, vol. 6(1), pages 1-14, January.
    6. Cao, Zhi & Shen, Lei & Liu, Litao & Zhao, Jianan & Zhong, Shuai & Kong, Hanxiao & Sun, Yanzhi, 2017. "Estimating the in-use cement stock in China: 1920–2013," Resources, Conservation & Recycling, Elsevier, vol. 122(C), pages 21-31.
    7. Daigo, Ichiro & Hashimoto, Susumu & Matsuno, Yasunari & Adachi, Yoshihiro, 2009. "Material stocks and flows accounting for copper and copper-based alloys in Japan," Resources, Conservation & Recycling, Elsevier, vol. 53(4), pages 208-217.
    8. Taulo, J.L. & Sebitosi, A.B., 2016. "Material and energy flow analysis of the Malawian tea industry," Renewable and Sustainable Energy Reviews, Elsevier, vol. 56(C), pages 1337-1350.
    9. Li, Shupeng & Wang, Zhe & Yue, Qiang & Zhang, Tingan, 2022. "Analysis of the quantity and spatial characterization of aluminum in-use stocks in China," Resources Policy, Elsevier, vol. 79(C).
    10. Wang, Minxi & Chen, Wu & Li, Xin, 2015. "Substance flow analysis of copper in production stage in the U.S. from 1974 to 2012," Resources, Conservation & Recycling, Elsevier, vol. 105(PA), pages 36-48.
    11. Spatari, S. & Bertram, M. & Gordon, Robert B. & Henderson, K. & Graedel, T.E., 2005. "Twentieth century copper stocks and flows in North America: A dynamic analysis," Ecological Economics, Elsevier, vol. 54(1), pages 37-51, July.
    12. Torsten Hummen & Stefanie Hellweg & Ramin Roshandel, 2023. "Optimizing Lifespan of Circular Products: A Generic Dynamic Programming Approach for Energy-Using Products," Energies, MDPI, vol. 16(18), pages 1-27, September.
    13. Truttmann, Nina & Rechberger, Helmut, 2006. "Contribution to resource conservation by reuse of electrical and electronic household appliances," Resources, Conservation & Recycling, Elsevier, vol. 48(3), pages 249-262.
    14. Geyer, R. & Davis, J. & Ley, J. & He, J. & Clift, R. & Kwan, A. & Sansom, M. & Jackson, T., 2007. "Time-dependent material flow analysis of iron and steel in the UK," Resources, Conservation & Recycling, Elsevier, vol. 51(1), pages 101-117.
    15. Yuan, Zengwei & Liu, Xin & Wu, Huijun & Zhang, Ling & Bi, Jun, 2011. "Anthropogenic phosphorus flow analysis of Lujiang County, Anhui Province, Central China," Ecological Modelling, Elsevier, vol. 222(8), pages 1534-1543.
    16. Sverdrup, Harald U. & Ragnarsdottir, Kristin Vala & Koca, Deniz, 2015. "Aluminium for the future: Modelling the global production, market supply, demand, price and long term development of the global reserves," Resources, Conservation & Recycling, Elsevier, vol. 103(C), pages 139-154.
    17. Ciacci, Luca & Chen, Weiqiang & Passarini, Fabrizio & Eckelman, Matthew & Vassura, Ivano & Morselli, Luciano, 2013. "Historical evolution of anthropogenic aluminum stocks and flows in Italy," Resources, Conservation & Recycling, Elsevier, vol. 72(C), pages 1-8.
    18. Simões, Pedro & Marques, Rui Cunha, 2011. "How does the operational environment affect utility performance? A parametric study on the waste sector," Resources, Conservation & Recycling, Elsevier, vol. 55(7), pages 695-702.
    19. Li, Yun & Yue, Qiang & He, Junhao & Zhao, Feng & Wang, Heming, 2020. "When will the arrival of China's secondary aluminum era?," Resources Policy, Elsevier, vol. 65(C).
    20. Tanimoto, Armando H. & Gabarrell Durany, Xavier & Villalba, Gara & Pires, Armando Caldeira, 2010. "Material flow accounting of the copper cycle in Brazil," Resources, Conservation & Recycling, Elsevier, vol. 55(1), pages 20-28.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:jrpoli:v:52:y:2017:i:c:p:235-244. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/inca/30467 .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.