IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v93y2015ip1p141-153.html
   My bibliography  Save this article

Heat transfer analysis of metal oxide surge arrester under power frequency applied voltage

Author

Listed:
  • Seyyedbarzegar, Seyyed Meysam
  • Mirzaie, Mohammad

Abstract

Electro-thermal model of metal oxide surge arrester based on adaptive method has been proposed in this paper. Finite element method has been used to model surge arrester. Power loss, which is major parameter in electro-thermal analysis, has been estimated as a heat source in proposed model using artificial neural network and adaptive network based fuzzy inference system. In addition to voltage and temperature, operating history is also an important factor that must be considered in power loss estimation process. In order to formulize surge arrester performance history, degradation factor has been suggested as a new index in this paper. Therefore, voltage, temperature and degradation factor have been used as inputs in artificial models. So as to train the artificial neural network and adaptive network based fuzzy inference system, experimental results have been obtained by laboratory tests on new and utilized surge arresters varistors. In this regards, high voltage experimental setup, chamber and an oven have been prepared to acquire modeling data. Also, the results of infrared thermal camera have been used to validate the results of proposed adaptive electro-thermal model. Moreover, convection and radiation as effective factors in surface to ambient heat transfer have been studied and compared.

Suggested Citation

  • Seyyedbarzegar, Seyyed Meysam & Mirzaie, Mohammad, 2015. "Heat transfer analysis of metal oxide surge arrester under power frequency applied voltage," Energy, Elsevier, vol. 93(P1), pages 141-153.
    • Handle: RePEc:eee:energy:v:93:y:2015:i:p1:p:141-153
    DOI: 10.1016/j.energy.2015.09.031
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544215012414
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2015.09.031?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Nafar, M. & Gharehpetian, G.B. & Niknam, T., 2011. "Improvement of estimation of surge arrester parameters by using Modified Particle Swarm Optimization," Energy, Elsevier, vol. 36(8), pages 4848-4854.
    2. Yuan, Fang & Chen, Qun, 2011. "Two energy conservation principles in convective heat transfer optimization," Energy, Elsevier, vol. 36(9), pages 5476-5485.
    3. Yazdani-Asrami, Mohammad & Mirzaie, Mohammad & Shayegani Akmal, Amir Abbas, 2013. "No-load loss calculation of distribution transformers supplied by nonsinusoidal voltage using three-dimensional finite element analysis," Energy, Elsevier, vol. 50(C), pages 205-219.
    4. Aadmi, Moussa & Karkri, Mustapha & El Hammouti, Mimoun, 2014. "Heat transfer characteristics of thermal energy storage of a composite phase change materials: Numerical and experimental investigations," Energy, Elsevier, vol. 72(C), pages 381-392.
    5. Christodoulou, C.A. & Vita, V. & Ekonomou, L. & Chatzarakis, G.E. & Stathopulos, I.A., 2010. "Application of Powell’s optimization method to surge arrester circuit models’ parameters," Energy, Elsevier, vol. 35(8), pages 3375-3380.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Behnam Ranjbar & Ali Darvishi & Rahman Dashti & Hamid Reza Shaker, 2022. "A Survey of Diagnostic and Condition Monitoring of Metal Oxide Surge Arrester in the Power Distribution Network," Energies, MDPI, vol. 15(21), pages 1-18, October.
    2. Jiazheng Lu & Pengkang Xie & Zhen Fang & Jianping Hu, 2018. "Electro-Thermal Modeling of Metal-Oxide Arrester under Power Frequency Applied Voltages," Energies, MDPI, vol. 11(6), pages 1-13, June.
    3. Smitha, T.V. & Nagaraja, K.V., 2019. "An efficient automated higher-order finite element computation technique using parabolic arcs for planar and multiply-connected energy problems," Energy, Elsevier, vol. 183(C), pages 996-1011.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Christos A. Christodoulou & Vasiliki Vita & Georgios Perantzakis & Lambros Ekonomou & George Milushev, 2017. "Adjusting the Parameters of Metal Oxide Gapless Surge Arresters’ Equivalent Circuits Using the Harmony Search Method," Energies, MDPI, vol. 10(12), pages 1-11, December.
    2. Beata Pytlik & Daniel Smykowski & Piotr Szulc, 2022. "The Impact of Baffle Geometry in the PCM Heat Storage Unit on the Charging Process with High and Low Water Streams," Energies, MDPI, vol. 15(24), pages 1-17, December.
    3. Hamid, Mohammed O.A. & Zhang, Bo & Yang, Luopeng, 2014. "Application of field synergy principle for optimization fluid flow and convective heat transfer in a tube bundle of a pre-heater," Energy, Elsevier, vol. 76(C), pages 241-253.
    4. Byungju Park & Jaehyeong Lee & Hangkyu Yoo & Gilsoo Jang, 2021. "Harmonic Mitigation Using Passive Harmonic Filters: Case Study in a Steel Mill Power System," Energies, MDPI, vol. 14(8), pages 1-16, April.
    5. Guo, Jiangfeng & Huai, Xiulan, 2012. "Optimization design of recuperator in a chemical heat pump system based on entransy dissipation theory," Energy, Elsevier, vol. 41(1), pages 335-343.
    6. Zhao, Xiaohuan & E, Jiaqiang & Zhang, Zhiqing & Chen, Jingwei & Liao, Gaoliang & Zhang, Feng & Leng, Erwei & Han, Dandan & Hu, Wenyu, 2020. "A review on heat enhancement in thermal energy conversion and management using Field Synergy Principle," Applied Energy, Elsevier, vol. 257(C).
    7. Jia, Xiaoyu & Lin, Mei & Su, Shiwei & Wang, Qiuwang & Yang, Jian, 2022. "Numerical study on temperature rise and mechanical properties of winding in oil-immersed transformer," Energy, Elsevier, vol. 239(PA).
    8. Wang, Xiaoyu & Jin, Xing & Yin, Yonggao & Wang, Xinyu & Shi, Xing & Zhou, Xin, 2020. "Study on non-isothermal moisture transfer characteristics of hygroscopic building materials: From parameter characterization to model analysis," Energy, Elsevier, vol. 212(C).
    9. Bazri, Shahab & Badruddin, Irfan Anjum & Naghavi, Mohammad Sajad & Bahiraei, Mehdi, 2018. "A review of numerical studies on solar collectors integrated with latent heat storage systems employing fins or nanoparticles," Renewable Energy, Elsevier, vol. 118(C), pages 761-778.
    10. Cheng, Xuetao & Liang, Xingang, 2012. "Entransy loss in thermodynamic processes and its application," Energy, Elsevier, vol. 44(1), pages 964-972.
    11. Palacios, Anabel & Cong, Lin & Navarro, M.E. & Ding, Yulong & Barreneche, Camila, 2019. "Thermal conductivity measurement techniques for characterizing thermal energy storage materials – A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 108(C), pages 32-52.
    12. Xiao, X. & Zhang, P., 2015. "Numerical and experimental study of heat transfer characteristics of a shell-tube latent heat storage system: Part I – Charging process," Energy, Elsevier, vol. 79(C), pages 337-350.
    13. Guillermo Salinas & Juan A. Serrano-Vargas & Javier Muñoz-Antón & Pedro Alou, 2021. "Thermal Resistance Matrix Extraction from Finite-Element Analysis for High-Frequency Magnetic Components," Energies, MDPI, vol. 14(11), pages 1-14, May.
    14. Narimani, Mohammad Rasoul & Azizipanah-Abarghooee, Rasoul & Zoghdar-Moghadam-Shahrekohne, Behrouz & Gholami, Kayvan, 2013. "A novel approach to multi-objective optimal power flow by a new hybrid optimization algorithm considering generator constraints and multi-fuel type," Energy, Elsevier, vol. 49(C), pages 119-136.
    15. Nafar, M. & Gharehpetian, G.B. & Niknam, T., 2011. "Improvement of estimation of surge arrester parameters by using Modified Particle Swarm Optimization," Energy, Elsevier, vol. 36(8), pages 4848-4854.
    16. Mehdaoui, Farah & Hazami, Majdi & Messaouda, Anis & Taghouti, Hichem & Guizani, AmenAllah, 2019. "Thermal testing and numerical simulation of PCM wall integrated inside a test cell on a small scale and subjected to the thermal stresses," Renewable Energy, Elsevier, vol. 135(C), pages 597-607.
    17. Yu, Zhi-Qiang & Feng, Yong-Liang & Zhou, Wen-Jing & Jin, Yu & Li, Ming-Jie & Li, Zeng-Yao & Tao, Wen-Quan, 2013. "Study on flow and heat transfer characteristics of composite porous material and its performance analysis by FSP and EDEP," Applied Energy, Elsevier, vol. 112(C), pages 1367-1375.
    18. El-Kharashi, Eyhab, 2014. "Detailed comparative study regarding different formulae of predicting the iron losses in a machine excited by non-sinusoidal supply," Energy, Elsevier, vol. 73(C), pages 513-522.
    19. Hussain, Abid & Tso, C.Y. & Chao, Christopher Y.H., 2016. "Experimental investigation of a passive thermal management system for high-powered lithium ion batteries using nickel foam-paraffin composite," Energy, Elsevier, vol. 115(P1), pages 209-218.
    20. Bahmani-Firouzi, Bahman & Farjah, Ebrahim & Azizipanah-Abarghooee, Rasoul, 2013. "An efficient scenario-based and fuzzy self-adaptive learning particle swarm optimization approach for dynamic economic emission dispatch considering load and wind power uncertainties," Energy, Elsevier, vol. 50(C), pages 232-244.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:93:y:2015:i:p1:p:141-153. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.