IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v273y2023ics0360544223005996.html
   My bibliography  Save this article

Energy harvesting from a hybrid piezo-dielectric vibration energy harvester with a self-priming circuit

Author

Listed:
  • Lai, Zhihui
  • Xu, Junchen
  • Fang, Shitong
  • Qiao, Zijian
  • Wang, Suo
  • Wang, Chen
  • Huang, Zhangjun
  • Zhou, Shengxi

Abstract

A hybrid piezo-dielectric vibration energy harvester (PDVEH) with a self-priming circuit (SPC) is proposed and explored in this paper for passive vibration energy harvesting without an external power supply. The PDVEH consists of a piezoelectric generator (PEG) and a self-priming dielectric elastomer generator (SP-DEG). The PEG can generate electricity from its attached piezoelectric patch. The SP-DEG combines a vibro-impact DEG (VI DEG) with an improved SPC, which can gain initial charges from the PEG. The SPC then enables the DEG to charge itself using the power generated from the intermittent impacts between the inner sphere and the dielectric elastomer membranes. Hence, passive vibration energy harvesting can be realized through the PDVEH. The operation principles of both the PEG and the SP-DEG are analyzed theoretically, and the corresponding governing equations are derived. The key parameters of the PEG are identified from experimental work, and its dynamic and electrical models are verified. The passive energy harvesting process of the SP-DEG charged by PEG is verified through circuit simulations. Numerical simulations are further conducted to reveal the dynamical and electrical behaviors of the PDVEH under external excitations. It is found that the PDVEH can harvest vibration energy effectively in a low-frequency range (0–7 Hz), and its energy harvesting performance is significantly affected by the amplitude and frequency of the excitation. The maximum output power of 0.12 mW can be achieved through the PDVEH in simulations under a vibration excitation with amplitude 1.0g and frequency 6.6 Hz, showing a potential way to realize DEG-based passive vibration energy harvesting.

Suggested Citation

  • Lai, Zhihui & Xu, Junchen & Fang, Shitong & Qiao, Zijian & Wang, Suo & Wang, Chen & Huang, Zhangjun & Zhou, Shengxi, 2023. "Energy harvesting from a hybrid piezo-dielectric vibration energy harvester with a self-priming circuit," Energy, Elsevier, vol. 273(C).
    • Handle: RePEc:eee:energy:v:273:y:2023:i:c:s0360544223005996
    DOI: 10.1016/j.energy.2023.127205
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544223005996
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2023.127205?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Sun, Yuhua & Wang, Ping & Lu, Jun & Xu, Jingmang & Wang, Peigen & Xie, Shouyong & Li, Yunwu & Dai, Jun & Wang, Bowen & Gao, Mingyuan, 2021. "Rail corrugation inspection by a self-contained triple-repellent electromagnetic energy harvesting system," Applied Energy, Elsevier, vol. 286(C).
    2. Yang, Fan & Gao, Mingyuan & Wang, Ping & Zuo, Jianyong & Dai, Jun & Cong, Jianli, 2021. "Efficient piezoelectric harvester for random broadband vibration of rail," Energy, Elsevier, vol. 218(C).
    3. Liu, Mingyi & Hughes-Oliver, Cherice & Queen, Robin & Zuo, Lei, 2021. "Comparison of negative-muscle-work energy harvesters from the human ankle: Different designs and trade-offs," Renewable Energy, Elsevier, vol. 170(C), pages 525-538.
    4. Fang, Shitong & Miao, Gang & Chen, Keyu & Xing, Juntong & Zhou, Shengxi & Yang, Zhichun & Liao, Wei-Hsin, 2022. "Broadband energy harvester for low-frequency rotations utilizing centrifugal softening piezoelectric beam array," Energy, Elsevier, vol. 241(C).
    5. Fan, Peng & Zhu, Liangquan & Zhu, Zicai & Chen, Hualing & Chen, Wei & Hu, Hong, 2021. "Predicting energy harvesting performance of a random nonlinear dielectric elastomer pendulum," Applied Energy, Elsevier, vol. 289(C).
    6. Wang, Suo & Miao, Gang & Zhou, Shengxi & Yang, Zhichun & Yurchenko, Daniil, 2022. "A novel electromagnetic energy harvester based on the bending of the sole," Applied Energy, Elsevier, vol. 314(C).
    7. Fan, Kangqi & Zhang, Yiwei & Liu, Haiyan & Cai, Meiling & Tan, Qinxue, 2019. "A nonlinear two-degree-of-freedom electromagnetic energy harvester for ultra-low frequency vibrations and human body motions," Renewable Energy, Elsevier, vol. 138(C), pages 292-302.
    8. Kui Di & Kunwei Bao & Haojie Chen & Xinjun Xie & Jianbo Tan & Yixing Shao & Yongxiang Li & Wenjun Xia & Zisheng Xu & Shiju E, 2021. "Dielectric Elastomer Generator for Electromechanical Energy Conversion: A Mini Review," Sustainability, MDPI, vol. 13(17), pages 1-17, September.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Zuo, Jianyong & Dong, Liwei & Yang, Fan & Guo, Ziheng & Wang, Tianpeng & Zuo, Lei, 2023. "Energy harvesting solutions for railway transportation: A comprehensive review," Renewable Energy, Elsevier, vol. 202(C), pages 56-87.
    2. Dong, Liwei & Zuo, Jianyong & Wang, Tianpeng & Xue, Wenbin & Wang, Ping & Li, Jun & Yang, Fan, 2022. "Enhanced piezoelectric harvester for track vibration based on tunable broadband resonant methodology," Energy, Elsevier, vol. 254(PA).
    3. Zhang, Tingsheng & Wu, Xiaoping & Pan, Yajia & Luo, Dabing & Xu, Yongsheng & Zhang, Zutao & Yuan, Yanping & Yan, Jinyue, 2022. "Vibration energy harvesting system based on track energy-recycling technology for heavy-duty freight railroads," Applied Energy, Elsevier, vol. 323(C).
    4. Kui Di & Kunwei Bao & Haojie Chen & Xinjun Xie & Jianbo Tan & Yixing Shao & Yongxiang Li & Wenjun Xia & Zisheng Xu & Shiju E, 2021. "Dielectric Elastomer Generator for Electromechanical Energy Conversion: A Mini Review," Sustainability, MDPI, vol. 13(17), pages 1-17, September.
    5. Zhang, L.B. & Dai, H.L. & Abdelkefi, A. & Lin, S.X. & Wang, L., 2019. "Theoretical modeling, wind tunnel measurements, and realistic environment testing of galloping-based electromagnetic energy harvesters," Applied Energy, Elsevier, vol. 254(C).
    6. Liu, Mingyi & Qian, Feng & Mi, Jia & Zuo, Lei, 2022. "Biomechanical energy harvesting for wearable and mobile devices: State-of-the-art and future directions," Applied Energy, Elsevier, vol. 321(C).
    7. Li, Zhongjie & Jiang, Xiaomeng & Xu, Wanqing & Gong, Ying & Peng, Yan & Zhong, Songyi & Xie, Shaorong, 2022. "Performance comparison of electromagnetic generators based on different circular magnet arrangements," Energy, Elsevier, vol. 258(C).
    8. Wang, Zhemin & Du, Yu & Li, Tianrun & Yan, Zhimiao & Tan, Ting, 2021. "A flute-inspired broadband piezoelectric vibration energy harvesting device with mechanical intelligent design," Applied Energy, Elsevier, vol. 303(C).
    9. Zou, Donglin & Liu, Gaoyu & Rao, Zhushi & Tan, Ting & Zhang, Wenming & Liao, Wei-Hsin, 2021. "Design of a multi-stable piezoelectric energy harvester with programmable equilibrium point configurations," Applied Energy, Elsevier, vol. 302(C).
    10. Tan, Qinxue & Fan, Kangqi & Guo, Jiyuan & Wen, Tao & Gao, Libo & Zhou, Shengxi, 2021. "A cantilever-driven rotor for efficient vibration energy harvesting," Energy, Elsevier, vol. 235(C).
    11. Olga Lingaitienė & Juozas Merkevičius & Vida Davidavičienė, 2021. "The Model of Vehicle and Route Selection for Energy Saving," Sustainability, MDPI, vol. 13(8), pages 1-20, April.
    12. Hossain Ahmed & Riaz Ahmed, 2023. "A Mass-In-Mass Metamaterial Design for Harvesting Energy at a Broadband Frequency Range," Energies, MDPI, vol. 16(16), pages 1-13, August.
    13. Gu, Yuhan & Liu, Weiqun & Zhao, Caiyou & Wang, Ping, 2020. "A goblet-like non-linear electromagnetic generator for planar multi-directional vibration energy harvesting," Applied Energy, Elsevier, vol. 266(C).
    14. Yu, Han & Hou, Chengwei & Shan, Xiaobiao & Zhang, Xingxu & Song, Henan & Zhang, Xiaofan & Xie, Tao, 2022. "A novel seesaw-like piezoelectric energy harvester for low frequency vibration," Energy, Elsevier, vol. 261(PB).
    15. Hong, Seong Do & Ahn, Jung Hwan & Kim, Kyung-Bum & Kim, Jeong Hun & Cho, Jae Yong & Woo, Min Sik & Song, Yewon & Hwang, Wonseop & Jeon, Deok Hwan & Kim, Jihoon & Jeong, Se Yeong & Woo, Sang Bum & Ryu,, 2022. "Uniform stress distribution road piezoelectric generator with free-fixed-end type central strike mechanism," Energy, Elsevier, vol. 239(PA).
    16. Wang, Yifeng & Li, Shoutai & Gao, Mingyuan & Ouyang, Huajiang & He, Qing & Wang, Ping, 2021. "Analysis, design and testing of a rolling magnet harvester with diametrical magnetization for train vibration," Applied Energy, Elsevier, vol. 300(C).
    17. Zhijie Feng & Han Peng & Yong Chen, 2021. "A Dual Resonance Electromagnetic Vibration Energy Harvester for Wide Harvested Frequency Range with Enhanced Output Power," Energies, MDPI, vol. 14(22), pages 1-15, November.
    18. Wang, Junlei & Zhang, Chengyun & Hu, Guobiao & Liu, Xiaowei & Liu, Huadong & Zhang, Zhien & Das, Raj, 2022. "Wake galloping energy harvesting in heat exchange systems under the influence of ash deposition," Energy, Elsevier, vol. 253(C).
    19. Peng, Yan & Xu, Zhibing & Wang, Min & Li, Zhongjie & Peng, Jinlin & Luo, Jun & Xie, Shaorong & Pu, Huayan & Yang, Zhengbao, 2021. "Investigation of frequency-up conversion effect on the performance improvement of stack-based piezoelectric generators," Renewable Energy, Elsevier, vol. 172(C), pages 551-563.
    20. Ramiz Salama & Fadi Al-Turjman, 2023. "Sustainable Energy Production in Smart Cities," Sustainability, MDPI, vol. 15(22), pages 1-25, November.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:273:y:2023:i:c:s0360544223005996. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.