IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v263y2023ipbs0360544222026500.html
   My bibliography  Save this article

Study on CO2 adsorption capacity and kinetic mechanism of CO2 adsorbent prepared from fly ash

Author

Listed:
  • Guo, Baihe
  • Zhang, Jingchao
  • Wang, Yanlin
  • Qiao, Xiaolei
  • Xiang, Jun
  • Jin, Yan

Abstract

The use of fly ash from coal-fired power plants for CO2 adsorption can reduce CO2 emissions and CO2 capture costs while making efficient use of power plant solid waste. In this study, fly ash was used to prepare aerogel support with good microstructure, and the support was impregnated with an incipient wetness impregnation method to make CO2 adsorbent. Adsorption experiments of CO2 adsorbents were carried out in a self-designed small fixed-bed reactor to study the influence of reaction conditions on the adsorption capacity of adsorbents. The results showed that the aerogel support prepared from fly ash had good microscopic properties with specific surface area and specific pore volume were 400 m2/g and 1.9 cm3/g, respectively. The pore structure was uniform, and the proportion of mesopores reached more than 99%. Under the reaction condition of 60 °C reaction temperature, 15% water vapor concentration, 15% CO2 concentration and 500 mL/min total gas flow rate, the maximum adsorption capacity of KA-30 adsorbent was 2.02 mmol/g. Avrami fractional kinetics model was used to calculate the cumulative adsorption capacity to study the adsorption kinetics. Combined with mass transfer kinetic model and deactivation model, the experimental breakthrough curve was fitted to study the adsorption mechanism of the adsorbent.

Suggested Citation

  • Guo, Baihe & Zhang, Jingchao & Wang, Yanlin & Qiao, Xiaolei & Xiang, Jun & Jin, Yan, 2023. "Study on CO2 adsorption capacity and kinetic mechanism of CO2 adsorbent prepared from fly ash," Energy, Elsevier, vol. 263(PB).
    • Handle: RePEc:eee:energy:v:263:y:2023:i:pb:s0360544222026500
    DOI: 10.1016/j.energy.2022.125764
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544222026500
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2022.125764?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Zhao, Chuanwen & Guo, Yafei & Li, Changhai & Lu, Shouxiang, 2014. "Removal of low concentration CO2 at ambient temperature using several potassium-based sorbents," Applied Energy, Elsevier, vol. 124(C), pages 241-247.
    2. Dang Viet Quang & Abdallah Dindi & Aravind V Rayer & Nabil El Hadri & Abdurahim Abdulkadir & Mohammad R.M. Abu‐Zahra, 2015. "Effect of moisture on the heat capacity and the regeneration heat required for CO 2 capture process using PEI impregnated mesoporous precipitated silica," Greenhouse Gases: Science and Technology, Blackwell Publishing, vol. 5(1), pages 91-101, February.
    3. Lee, Jaehee & Han, Sang-Jun & Wee, Jung-Ho, 2014. "Synthesis of dry sorbents for carbon dioxide capture using coal fly ash and its performance," Applied Energy, Elsevier, vol. 131(C), pages 40-47.
    4. Liu, Yamin & Yu, Xiaojing, 2018. "Carbon dioxide adsorption properties and adsorption/desorption kinetics of amine-functionalized KIT-6," Applied Energy, Elsevier, vol. 211(C), pages 1080-1088.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Farihahusnah Hussin & Nur Nadira Hazani & Mohamed Kheireddine Aroua, 2023. "The Effect of Physicochemical Properties and Surface Chemistry on CO 2 Adsorption Capacity of Potassium Acetate-Treated Carbon Pellets," Sustainability, MDPI, vol. 15(6), pages 1-21, March.
    2. Long Jiang & Liang Cheng & Yuxuan Zhang & Gaojun Liu & Jian Sun, 2023. "A Review on CO 2 Sequestration via Mineralization of Coal Fly Ash," Energies, MDPI, vol. 16(17), pages 1-24, August.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Guo, Yafei & Zhao, Chuanwen & Chen, Xiaoping & Li, Changhai, 2015. "CO2 capture and sorbent regeneration performances of some wood ash materials," Applied Energy, Elsevier, vol. 137(C), pages 26-36.
    2. Zhihua Zhang, 2015. "Techno-Economic Assessment of Carbon Capture and Storage Facilities Coupled to Coal-Fired Power Plants," Energy & Environment, , vol. 26(6-7), pages 1069-1080, November.
    3. Lou, Feijian & Zhang, Anfeng & Zhang, Guanghui & Ren, Limin & Guo, Xinwen & Song, Chunshan, 2020. "Enhanced kinetics for CO2 sorption in amine-functionalized mesoporous silica nanosphere with inverted cone-shaped pore structure," Applied Energy, Elsevier, vol. 264(C).
    4. Yudong Ding & Liheng Guo & Xiaoqiang Li & Qiang Liao & Xun Zhu & Hong Wang, 2021. "CO2 absorption of anhydrous colloidal suspension based silica nanospheres with different microstructures," Energy & Environment, , vol. 32(8), pages 1437-1456, December.
    5. Hosseini, Tahereh & Haque, Nawshad & Selomulya, Cordelia & Zhang, Lian, 2016. "Mineral carbonation of Victorian brown coal fly ash using regenerative ammonium chloride – Process simulation and techno-economic analysis," Applied Energy, Elsevier, vol. 175(C), pages 54-68.
    6. Ji, Long & Yu, Hai & Li, Kangkang & Yu, Bing & Grigore, Mihaela & Yang, Qi & Wang, Xiaolong & Chen, Zuliang & Zeng, Ming & Zhao, Shuaifei, 2018. "Integrated absorption-mineralisation for low-energy CO2 capture and sequestration," Applied Energy, Elsevier, vol. 225(C), pages 356-366.
    7. Liu, Yamin & Yu, Xiaojing, 2018. "Carbon dioxide adsorption properties and adsorption/desorption kinetics of amine-functionalized KIT-6," Applied Energy, Elsevier, vol. 211(C), pages 1080-1088.
    8. Xu, Chenhuan & Zhang, Yongmin & Yang, Tianlei & Jia, Xiaohao & Qiu, Feng & Liu, Cenfan & Jiang, Shuai, 2023. "Adsorption mechanisms and regeneration heat analysis of a solid amine sorbent during CO2 capture in wet flue gas," Energy, Elsevier, vol. 284(C).
    9. Li, Yingjie & Su, Mengying & Xie, Xin & Wu, Shuimu & Liu, Changtian, 2015. "CO2 capture performance of synthetic sorbent prepared from carbide slag and aluminum nitrate hydrate by combustion synthesis," Applied Energy, Elsevier, vol. 145(C), pages 60-68.
    10. Qin, Changlei & Yin, Junjun & Ran, Jingyu & Zhang, Li & Feng, Bo, 2014. "Effect of support material on the performance of K2CO3-based pellets for cyclic CO2 capture," Applied Energy, Elsevier, vol. 136(C), pages 280-288.
    11. Kong, Yong & Shen, Xiaodong & Cui, Sheng & Fan, Maohong, 2015. "Development of monolithic adsorbent via polymeric sol–gel process for low-concentration CO2 capture," Applied Energy, Elsevier, vol. 147(C), pages 308-317.
    12. Yaumi, A.L. & Bakar, M.Z. Abu & Hameed, B.H., 2017. "Reusable nitrogen-doped mesoporous carbon adsorbent for carbon dioxide adsorption in fixed-bed," Energy, Elsevier, vol. 138(C), pages 776-784.
    13. Sanna, Aimaro & Ramli, Ili & Mercedes Maroto-Valer, M., 2015. "Development of sodium/lithium/fly ash sorbents for high temperature post-combustion CO2 capture," Applied Energy, Elsevier, vol. 156(C), pages 197-206.
    14. Yan, Shuren & Zhu, Ding & Zhang, Zhiyong & Li, Hai & Chen, Guangjin & Liu, Bei, 2019. "A pilot-scale experimental study on CO2 capture using Zeolitic imidazolate framework-8 slurry under normal pressure," Applied Energy, Elsevier, vol. 248(C), pages 104-114.
    15. Gao, Jubao & Liu, Yida & Hoshino, Yu & Inoue, Gen, 2019. "Amine-containing nanogel particles supported on porous carriers for enhanced carbon dioxide capture," Applied Energy, Elsevier, vol. 253(C), pages 1-1.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:263:y:2023:i:pb:s0360544222026500. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.