IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v257y2022ics0360544222017327.html
   My bibliography  Save this article

Investigation of a novel window solar air collector with 7-moveable absorber plates

Author

Listed:
  • Dawood, Norhan I.
  • Jalil, Jalal M.
  • Ahmed, Majida K.

Abstract

The focus of this paper is on a thermal performance of the window solar air collector with seven-moveable circular perforated absorbent plates that controlled manually. The proposed window solar air collector is a solar thermal system which can be employed to preheat the ventilation air supply and compromise between sunlight penetration to the desired buildings and hot air gain. In this work, five angles are selected (0 °, 30 °, 45 °, 60 °, and 90 °) and mathematical model and formulation based on the finite volume scheme (SIMPLE) algorithm has been implemented to solve the 3-D forced convection with turbulent flow. Different values of solar irradiance intensities (330, 530, and 730 W/m2) and air mass flow rates (0.0097, 0.0151, 0.0224, and 0.0298 kg/s) were adopted. The results found significant difference between air inlet and outlet temperatures are gained at angle 0° (vertical absorbent plates position) at irradiance 730 W/m2 and mass flow rate 0.0097 kg/s is 11.2 °C and the maximum thermal efficiency is 71% at a mass flow rate of 0.0298 kg/s. Also, flexibility between hot air from the collector and sunlight penetrating into the room is gained when the plate angles set on (30 °, 45 °, 60 °, and 90 °).

Suggested Citation

  • Dawood, Norhan I. & Jalil, Jalal M. & Ahmed, Majida K., 2022. "Investigation of a novel window solar air collector with 7-moveable absorber plates," Energy, Elsevier, vol. 257(C).
    • Handle: RePEc:eee:energy:v:257:y:2022:i:c:s0360544222017327
    DOI: 10.1016/j.energy.2022.124829
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544222017327
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2022.124829?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Hu, Yue & Heiselberg, Per Kvols & Johra, Hicham & Guo, Rui, 2020. "Experimental and numerical study of a PCM solar air heat exchanger and its ventilation preheating effectiveness," Renewable Energy, Elsevier, vol. 145(C), pages 106-115.
    2. Sandberg, M. & Moshfegh, B., 1996. "Investigation of fluid flow and heat transfer in a vertical channel heated from one side by PV elements, part II - Experimental study," Renewable Energy, Elsevier, vol. 8(1), pages 254-258.
    3. Michaux, Ghislain & Greffet, Rémy & Salagnac, Patrick & Ridoret, Jean-Baptiste, 2019. "Modelling of an airflow window and numerical investigation of its thermal performances by comparison to conventional double and triple-glazed windows," Applied Energy, Elsevier, vol. 242(C), pages 27-45.
    4. Wandong Zheng & Huan Zhang & Shijun You & Yindan Fu, 2017. "Experimental Investigation of the Transpired Solar Air Collectors and Metal Corrugated Packing Solar Air Collectors," Energies, MDPI, vol. 10(3), pages 1-12, March.
    5. Nowzari, Raheleh & Aldabbagh, L.B.Y. & Egelioglu, F., 2014. "Single and double pass solar air heaters with partially perforated cover and packed mesh," Energy, Elsevier, vol. 73(C), pages 694-702.
    6. Li, Bojia & You, Shijun & Ye, Tianzhen & Zhang, Huan & Li, Xianli & Li, Chao, 2014. "Mathematical modeling and experimental verification of vacuum glazed transpired solar collector with slit-like perforations," Renewable Energy, Elsevier, vol. 69(C), pages 43-49.
    7. Zheng, Wandong & Li, Bojia & Zhang, Huan & You, Shijun & Li, Ying & Ye, Tianzhen, 2016. "Thermal characteristics of a glazed transpired solar collector with perforating corrugated plate in cold regions," Energy, Elsevier, vol. 109(C), pages 781-790.
    8. Han, Jun & Lu, Lin & Yang, Hongxing, 2010. "Numerical evaluation of the mixed convective heat transfer in a double-pane window integrated with see-through a-Si PV cells with low-e coatings," Applied Energy, Elsevier, vol. 87(11), pages 3431-3437, November.
    9. Moshfegh, B. & Sandberg, M., 1996. "Investigation of fluid flow and heat transfer in a vertical channel heated from one side by PV elements, part I - Numerical Study," Renewable Energy, Elsevier, vol. 8(1), pages 248-253.
    10. Salih, Salah M. & Jalil, Jalal M. & Najim, Saleh E., 2019. "Experimental and numerical analysis of double-pass solar air heater utilizing multiple capsules PCM," Renewable Energy, Elsevier, vol. 143(C), pages 1053-1066.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Wandong Zheng & Huan Zhang & Shijun You & Yindan Fu, 2017. "Experimental Investigation of the Transpired Solar Air Collectors and Metal Corrugated Packing Solar Air Collectors," Energies, MDPI, vol. 10(3), pages 1-12, March.
    2. Tonui, J.K. & Tripanagnostopoulos, Y., 2007. "Improved PV/T solar collectors with heat extraction by forced or natural air circulation," Renewable Energy, Elsevier, vol. 32(4), pages 623-637.
    3. Zondag, H.A., 2008. "Flat-plate PV-Thermal collectors and systems: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 12(4), pages 891-959, May.
    4. D'Orazio, M. & Di Perna, C. & Di Giuseppe, E., 2014. "Experimental operating cell temperature assessment of BIPV with different installation configurations on roofs under Mediterranean climate," Renewable Energy, Elsevier, vol. 68(C), pages 378-396.
    5. Afaq Jasim Mahmood, 2020. "Thermal Evaluation of a Double-Pass Unglazed Solar Air Heater with Perforated Plate and Wire Mesh Layers," Sustainability, MDPI, vol. 12(9), pages 1-15, April.
    6. Sengupta, Ayan & Mishra, Dipti Prasad & Sarangi, Shailesh Kumar, 2022. "Computational performance analysis of a solar chimney using surface modifications of the absorber plate," Renewable Energy, Elsevier, vol. 185(C), pages 1095-1109.
    7. Moshfegh, B. & Sandberg, M., 1998. "Flow and heat transfer in the air gap behind photovoltaic panels," Renewable and Sustainable Energy Reviews, Elsevier, vol. 2(3), pages 287-301, September.
    8. Mukherjee, S. & Shit, G.C., 2022. "Mathematical modeling of electrothermal couple stress nanofluid flow and entropy in a porous microchannel under injection process," Applied Mathematics and Computation, Elsevier, vol. 426(C).
    9. Wang, Dengjia & Gao, Qian & Liu, Yanfeng & Wang, Yingying & Chen, Yaowen & Liu, Yuan & Liu, Jiaping, 2019. "Experimental study on heating characteristics and parameter optimization of transpired solar collectors," Applied Energy, Elsevier, vol. 238(C), pages 534-546.
    10. Mohammed Elden & K. Sopian & Fatah Alghoul & Abdelnasser Abouhnik & Ae. M., 2013. "Solar Chimney Model Parameters to Enhance Cooling PV Panel Performance," Modern Applied Science, Canadian Center of Science and Education, vol. 7(2), pages 1-24, February.
    11. Shi, Long & Zhang, Guomin & Yang, Wei & Huang, Dongmei & Cheng, Xudong & Setunge, Sujeeva, 2018. "Determining the influencing factors on the performance of solar chimney in buildings," Renewable and Sustainable Energy Reviews, Elsevier, vol. 88(C), pages 223-238.
    12. Zheng, Wandong & Zhang, Huan & You, Shijun & Fu, Yindan & Zheng, Xuejing, 2017. "Thermal performance analysis of a metal corrugated packing solar air collector in cold regions," Applied Energy, Elsevier, vol. 203(C), pages 938-947.
    13. Gao, Meng & Fan, Jianhua & Furbo, Simon & Xiang, Yutong, 2022. "Energy and exergy analysis of a glazed solar preheating collector wall with non-uniform perforated corrugated plate," Renewable Energy, Elsevier, vol. 196(C), pages 1048-1063.
    14. Zapałowicz, Zbigniew & Zeńczak, Wojciech, 2021. "The possibilities to improve ship's energy efficiency through the application of PV installation including cooled modules," Renewable and Sustainable Energy Reviews, Elsevier, vol. 143(C).
    15. Han, Jun & Lu, Lin & Yang, Hongxing, 2010. "Numerical evaluation of the mixed convective heat transfer in a double-pane window integrated with see-through a-Si PV cells with low-e coatings," Applied Energy, Elsevier, vol. 87(11), pages 3431-3437, November.
    16. Zhang, Xingxing & Zhao, Xudong & Xu, Jihuan & Yu, Xiaotong, 2013. "Characterization of a solar photovoltaic/loop-heat-pipe heat pump water heating system," Applied Energy, Elsevier, vol. 102(C), pages 1229-1245.
    17. Sandberg, Mats & Moshfegh, Bahram, 1998. "Ventilated-solar roof air flow and heat transfer investigation," Renewable Energy, Elsevier, vol. 15(1), pages 287-292.
    18. Kundakci Koyunbaba, Basak & Yilmaz, Zerrin, 2012. "The comparison of Trombe wall systems with single glass, double glass and PV panels," Renewable Energy, Elsevier, vol. 45(C), pages 111-118.
    19. Ma, Tao & Yang, Hongxing & Zhang, Yinping & Lu, Lin & Wang, Xin, 2015. "Using phase change materials in photovoltaic systems for thermal regulation and electrical efficiency improvement: A review and outlook," Renewable and Sustainable Energy Reviews, Elsevier, vol. 43(C), pages 1273-1284.
    20. Stazi, F. & Tomassoni, F. & Vegliò, A. & Di Perna, C., 2011. "Experimental evaluation of ventilated walls with an external clay cladding," Renewable Energy, Elsevier, vol. 36(12), pages 3373-3385.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:257:y:2022:i:c:s0360544222017327. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.