IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v239y2022ipbs0360544221023707.html
   My bibliography  Save this article

Identification of energy wastes through sound analysis in compressed air systems

Author

Listed:
  • Czopek, Dorota
  • Gryboś, Dominik
  • Leszczyński, Jacek
  • Wiciak, Jerzy

Abstract

This paper proposes a new approach which is able to identify energy losses of compressed air in any CAS based on acoustic energy emission. By means of a previously validated mathematical model, the inverse problem that finds air power lost over time from the sound generated by air expansion is solved. The developed method is tested in a laboratory scale while a tank is being emptied through artificial holes with different diameters in a pipe. Two supplying cases: continuous supply of compressed air to the tank and single filling of the tank are considered. All measurements are made in an anechoic chamber to record pure air expansion noise without any background sounds. The analysis shows that over certain range of leakage hole diameters there is a dependence between the generated sound pressure level and the mass flow and, therefore, the power loss. Thus, acoustic monitoring could be effective in leakage diagnosing in CASs, which is important for production energy efficiency management.

Suggested Citation

  • Czopek, Dorota & Gryboś, Dominik & Leszczyński, Jacek & Wiciak, Jerzy, 2022. "Identification of energy wastes through sound analysis in compressed air systems," Energy, Elsevier, vol. 239(PB).
    • Handle: RePEc:eee:energy:v:239:y:2022:i:pb:s0360544221023707
    DOI: 10.1016/j.energy.2021.122122
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544221023707
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2021.122122?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Benedetti, Miriam & Bonfà, Francesca & Bertini, Ilaria & Introna, Vito & Salvatori, Simone & Ubertini, Stefano & Paradiso, Rosanna, 2019. "Maturity-based approach for the improvement of energy efficiency in industrial compressed air production and use systems," Energy, Elsevier, vol. 186(C).
    2. Bansal, Pradeep & Mohabir, Amar & Miller, William, 2016. "A novel method to determine air leakage in heat pump clothes dryers," Energy, Elsevier, vol. 96(C), pages 1-7.
    3. Leszczynski, J.S. & Grybos, D., 2019. "Compensation for the complexity and over-scaling in industrial pneumatic systems by the accumulation and reuse of exhaust air," Applied Energy, Elsevier, vol. 239(C), pages 1130-1141.
    4. Benedetti, Miriam & Bonfa', Francesca & Bertini, Ilaria & Introna, Vito & Ubertini, Stefano, 2018. "Explorative study on Compressed Air Systems’ energy efficiency in production and use: First steps towards the creation of a benchmarking system for large and energy-intensive industrial firms," Applied Energy, Elsevier, vol. 227(C), pages 436-448.
    5. Saidur, R. & Rahim, N.A. & Hasanuzzaman, M., 2010. "A review on compressed-air energy use and energy savings," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(4), pages 1135-1153, May.
    6. Dominik Gryboś & Jacek S. Leszczyński & Dorota Czopek & Jerzy Wiciak, 2021. "Exhaust Noise Reduction by Application of Expanded Collecting System in Pneumatic Tools and Machines," Energies, MDPI, vol. 14(6), pages 1-17, March.
    7. Li, Kang & Zhou, Xuejin & Tu, Ran & Xie, Qiyuan & Jiang, Xi, 2014. "The flow and heat transfer characteristics of supercritical CO2 leakage from a pipeline," Energy, Elsevier, vol. 71(C), pages 665-672.
    8. Cabello Eras, Juan José & Sagastume Gutiérrez, Alexis & Sousa Santos, Vladimir & Cabello Ulloa, Mario Javier, 2020. "Energy management of compressed air systems. Assessing the production and use of compressed air in industry," Energy, Elsevier, vol. 213(C).
    9. Vittorini, Diego & Cipollone, Roberto, 2016. "Energy saving potential in existing industrial compressors," Energy, Elsevier, vol. 102(C), pages 502-515.
    10. Nehler, Therese, 2018. "Linking energy efficiency measures in industrial compressed air systems with non-energy benefits – A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 89(C), pages 72-87.
    11. Salvatori, Simone & Benedetti, Miriam & Bonfà, Francesca & Introna, Vito & Ubertini, Stefano, 2018. "Inter-sectorial benchmarking of compressed air generation energy performance: Methodology based on real data gathering in large and energy-intensive industrial firms," Applied Energy, Elsevier, vol. 217(C), pages 266-280.
    12. Giacone, E. & Mancò, S., 2012. "Energy efficiency measurement in industrial processes," Energy, Elsevier, vol. 38(1), pages 331-345.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Massimo Borg & Paul Refalo & Emmanuel Francalanza, 2023. "Failure Detection Techniques on the Demand Side of Smart and Sustainable Compressed Air Systems: A Systematic Review," Energies, MDPI, vol. 16(7), pages 1-36, March.
    2. Geng, D. & Evans, S. & Kishita, Y., 2023. "The identification and classification of energy waste for efficient energy supervision in manufacturing factories," Renewable and Sustainable Energy Reviews, Elsevier, vol. 182(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Leszczynski, J.S. & Grybos, D., 2019. "Compensation for the complexity and over-scaling in industrial pneumatic systems by the accumulation and reuse of exhaust air," Applied Energy, Elsevier, vol. 239(C), pages 1130-1141.
    2. Cabello Eras, Juan José & Sagastume Gutiérrez, Alexis & Sousa Santos, Vladimir & Cabello Ulloa, Mario Javier, 2020. "Energy management of compressed air systems. Assessing the production and use of compressed air in industry," Energy, Elsevier, vol. 213(C).
    3. Jan Markowski & Dominik Gryboś & Jacek Leszczyński & Yohiside Suwa, 2023. "Exhaust Air Recovery System from the Utilisation Stage of Pneumatic System in Double Transmission Double Expansion Approach," Energies, MDPI, vol. 16(23), pages 1-14, November.
    4. Leszczynski, J.S. & Grybos, D., 2020. "Sensitivity analysis of Double Transmission Double Expansion (DTDE) systems for assessment of the environmental impact of recovering energy waste in exhaust air from compressed air systems," Applied Energy, Elsevier, vol. 278(C).
    5. Massimo Borg & Paul Refalo & Emmanuel Francalanza, 2023. "Failure Detection Techniques on the Demand Side of Smart and Sustainable Compressed Air Systems: A Systematic Review," Energies, MDPI, vol. 16(7), pages 1-36, March.
    6. Fábio de Oliveira Neves & Henrique Ewbank & José Arnaldo Frutuoso Roveda & Andrea Trianni & Fernando Pinhabel Marafão & Sandra Regina Monteiro Masalskiene Roveda, 2022. "Economic and Production-Related Implications for Industrial Energy Efficiency: A Logistic Regression Analysis on Cross-Cutting Technologies," Energies, MDPI, vol. 15(4), pages 1-19, February.
    7. Hernan Hernandez-Herrera & Jorge I. Silva-Ortega & Vicente Leonel Mart nez Diaz & Zaid Garc a Sanchez & Gilberto Gonz lez Garc a & Sandra M. Escorcia & Habid E. Zarate, 2020. "Energy Savings Measures in Compressed Air Systems," International Journal of Energy Economics and Policy, Econjournals, vol. 10(3), pages 414-422.
    8. Dominik Gryboś & Jacek S. Leszczyński, 2024. "A Review of Energy Overconsumption Reduction Methods in the Utilization Stage in Compressed Air Systems," Energies, MDPI, vol. 17(6), pages 1-22, March.
    9. Monjurul Hasan, A S M & Trianni, Andrea & Shukla, Nagesh & Katic, Mile, 2022. "A novel characterization based framework to incorporate industrial energy management services," Applied Energy, Elsevier, vol. 313(C).
    10. Nel, A.J.H. & Vosloo, J.C. & Mathews, M.J., 2018. "Financial model for energy efficiency projects in the mining industry," Energy, Elsevier, vol. 163(C), pages 546-554.
    11. Zhan, Changfeng & Yin, Yonggao & Jin, Xing & Zhang, Xiaosong, 2018. "Experimental and simulated study on a novel compressed air drying system using a liquid desiccant cycle," Energy, Elsevier, vol. 162(C), pages 60-71.
    12. Andrea Trianni & Davide Accordini & Enrico Cagno, 2020. "Identification and Categorization of Factors Affecting the Adoption of Energy Efficiency Measures within Compressed Air Systems," Energies, MDPI, vol. 13(19), pages 1-51, October.
    13. Benedetti, Miriam & Bonfa', Francesca & Bertini, Ilaria & Introna, Vito & Ubertini, Stefano, 2018. "Explorative study on Compressed Air Systems’ energy efficiency in production and use: First steps towards the creation of a benchmarking system for large and energy-intensive industrial firms," Applied Energy, Elsevier, vol. 227(C), pages 436-448.
    14. Miriam Benedetti & Francesca Bonfà & Vito Introna & Annalisa Santolamazza & Stefano Ubertini, 2019. "Real Time Energy Performance Control for Industrial Compressed Air Systems: Methodology and Applications," Energies, MDPI, vol. 12(20), pages 1-28, October.
    15. Annalisa Santolamazza & Vito Introna & Vittorio Cesarotti & Fabrizio Martini, 2023. "The Evolution of Energy Management Maturity in Organizations Subject to Mandatory Energy Audits: Findings from Italy," Energies, MDPI, vol. 16(9), pages 1-27, April.
    16. Zhang, Yongyu & Gao, Ran & Si, Pengfei & Shi, Lijun & Shang, Yinghui & Wang, Yi & Liu, Boran & Du, Xueqing & Zhao, Kejie & Li, Angui, 2023. "Study on performances of heat-oxygen coupling device for high-altitude environments," Energy, Elsevier, vol. 272(C).
    17. Doner, Nimeti & Ciddi, Kerem, 2022. "Regression analysis of the operational parameters and energy-saving potential of industrial compressed air systems," Energy, Elsevier, vol. 252(C).
    18. Kalantzis, Fotios & Niczyporuk, Hanna, 2021. "Can European businesses achieve productivity gains from investments in energy efficiency?," EIB Working Papers 2021/07, European Investment Bank (EIB).
    19. Vittorini, Diego & Cipollone, Roberto, 2016. "Energy saving potential in existing industrial compressors," Energy, Elsevier, vol. 102(C), pages 502-515.
    20. Elena Stefana & Paola Cocca & Filippo Marciano & Diana Rossi & Giuseppe Tomasoni, 2019. "A Review of Energy and Environmental Management Practices in Cast Iron Foundries to Increase Sustainability," Sustainability, MDPI, vol. 11(24), pages 1-18, December.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:239:y:2022:i:pb:s0360544221023707. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.