IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v207y2020ics0360544220312937.html
   My bibliography  Save this article

Modeling of downdraft gasification process: Part II - Studies on the effect of shrinking and non-shrinking biomass geometries on the performance of gasification process

Author

Listed:
  • Chaurasia, Ashish

Abstract

This study investigated the effect of shrinking and non-shrinking biomass geometries in a fixed bed reactor. Model simulation was performed to analyze the effect of biomass moisture content, gasification temperature, air flow rate, oxygen content in the primary air, and mass transfer coefficient on product yield for spherical, tabular, and cylindrical biomass briquettes. The model matched well with the experimental data. The production of hydrogen and carbon dioxide increased with an increase in moisture content. With an increase in gasification temperature, the water–gas shift reaction proceeded faster than the Boudouard reaction, leading to a decrease in the carbon dioxide composition and an increase in the carbon monoxide composition. Tabular shrinking particles with a H2/CO ratio of 1.44 and a CO/CO2 ratio of 0.22 at 1175 K were more favorable for producing value-added chemicals than the particles of all other geometries. The non-shrinking spherical particles had the highest low heating value (LHV) of 4.65 MJ/m3, whereas the tabular non-shrinking particles had the lowest LHV of 1.33 MJ/m3 among the shrinking and non-shrinking particles with all the other geometries considered. The gasification temperature was the most sensitive parameter, whereas moisture content and the mass transfer coefficient were the least sensitive parameters.

Suggested Citation

  • Chaurasia, Ashish, 2020. "Modeling of downdraft gasification process: Part II - Studies on the effect of shrinking and non-shrinking biomass geometries on the performance of gasification process," Energy, Elsevier, vol. 207(C).
    • Handle: RePEc:eee:energy:v:207:y:2020:i:c:s0360544220312937
    DOI: 10.1016/j.energy.2020.118186
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544220312937
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2020.118186?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Gautam, Neha & Chaurasia, Ashish, 2020. "Study on kinetics and bio-oil production from rice husk, rice straw, bamboo, sugarcane bagasse and neem bark in a fixed-bed pyrolysis process," Energy, Elsevier, vol. 190(C).
    2. Chaurasia, Ashish, 2016. "Modeling, simulation and optimization of downdraft gasifier: Studies on chemical kinetics and operating conditions on the performance of the biomass gasification process," Energy, Elsevier, vol. 116(P1), pages 1065-1076.
    3. Chaurasia, Ashish, 2018. "Modeling of downdraft gasification process: Studies on particle geometries in thermally thick regime," Energy, Elsevier, vol. 142(C), pages 991-1009.
    4. Chaurasia, Ashish, 2019. "Modeling of downdraft gasification process: Part I - Studies on shrinkage effect on tabular, cylindrical and spherical geometries," Energy, Elsevier, vol. 169(C), pages 130-141.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Gautam, Neha & Chaurasia, Ashish, 2020. "Study on kinetics and bio-oil production from rice husk, rice straw, bamboo, sugarcane bagasse and neem bark in a fixed-bed pyrolysis process," Energy, Elsevier, vol. 190(C).
    2. Chaurasia, Ashish, 2019. "Modeling of downdraft gasification process: Part I - Studies on shrinkage effect on tabular, cylindrical and spherical geometries," Energy, Elsevier, vol. 169(C), pages 130-141.
    3. Martínez, Laura V. & Rubiano, Jairo E. & Figueredo, Manuel & Gómez, María F., 2020. "Experimental study on the performance of gasification of corncobs in a downdraft fixed bed gasifier at various conditions," Renewable Energy, Elsevier, vol. 148(C), pages 1216-1226.
    4. Yepes Maya, Diego Mauricio & Silva Lora, Electo Eduardo & Andrade, Rubenildo Vieira & Ratner, Albert & Martínez Angel, Juan Daniel, 2021. "Biomass gasification using mixtures of air, saturated steam, and oxygen in a two-stage downdraft gasifier. Assessment using a CFD modeling approach," Renewable Energy, Elsevier, vol. 177(C), pages 1014-1030.
    5. Salina, Fernando Henriques & Molina, Felipe Braggio & Gallego, Antonio Garrido & Palacios-Bereche, Reynaldo, 2021. "Fast pyrolysis of sugarcane straw and its integration into the conventional ethanol production process through Pinch Analysis," Energy, Elsevier, vol. 215(PA).
    6. Alejandro Lyons Cerón & Alar Konist & Heidi Lees & Oliver Järvik, 2021. "Effect of Woody Biomass Gasification Process Conditions on the Composition of the Producer Gas," Sustainability, MDPI, vol. 13(21), pages 1-17, October.
    7. Smith Lewin, Caroline & Fonseca de Aguiar Martins, Ana Rosa & Pradelle, Florian, 2020. "Modelling, simulation and optimization of a solid residues downdraft gasifier: Application to the co-gasification of municipal solid waste and sugarcane bagasse," Energy, Elsevier, vol. 210(C).
    8. Chaurasia, Ashish, 2018. "Modeling of downdraft gasification process: Studies on particle geometries in thermally thick regime," Energy, Elsevier, vol. 142(C), pages 991-1009.
    9. Lifita N. Tande & Erik Resendiz-Mora & Valerie Dupont, 2021. "Bioh 2 , Heat and Power from Palm Empty Fruit Bunch via Pyrolysis-Autothermal Reforming: Plant Simulation, Experiments, and CO 2 Mitigation," Energies, MDPI, vol. 14(16), pages 1-25, August.
    10. Qian, Hongliang & Chen, Wei & Zhu, Weiwei & Liu, Chang & Lu, Xiaohua & Guo, Xiaojing & Huang, Dechun & Liang, Xiaodong & Kontogeorgis, Georgios M., 2019. "Simulation and evaluation of utilization pathways of biomasses based on thermodynamic data prediction," Energy, Elsevier, vol. 173(C), pages 610-625.
    11. Yuan, Peng & Shen, Boxiong & Duan, Dongping & Adwek, George & Mei, Xue & Lu, Fengju, 2017. "Study on the formation of direct reduced iron by using biomass as reductants of carbon containing pellets in RHF process," Energy, Elsevier, vol. 141(C), pages 472-482.
    12. Taheri, M.H. & Mosaffa, A.H. & Farshi, L. Garousi, 2017. "Energy, exergy and economic assessments of a novel integrated biomass based multigeneration energy system with hydrogen production and LNG regasification cycle," Energy, Elsevier, vol. 125(C), pages 162-177.
    13. Safarian, Sahar & Unnþórsson, Rúnar & Richter, Christiaan, 2019. "A review of biomass gasification modelling," Renewable and Sustainable Energy Reviews, Elsevier, vol. 110(C), pages 378-391.
    14. Stanislaw Szwaja & Anna Poskart & Monika Zajemska & Magdalena Szwaja, 2019. "Theoretical and Experimental Analysis on Co-Gasification of Sewage Sludge with Energetic Crops," Energies, MDPI, vol. 12(9), pages 1-15, May.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:207:y:2020:i:c:s0360544220312937. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.