IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v196y2020ics036054422030236x.html
   My bibliography  Save this article

Development in biomass preparation for suspension firing towards higher biomass shares and better boiler performance and fuel rangeability

Author

Listed:
  • Yin, Chungen

Abstract

Suspension-firing enjoys the great popularity in biomass-fired heat and power generation. Since it has the strictest requirement on fuel quality and particle size, cares must be taken in biomass handling. This paper reviews, combined with concrete cases, the development in biomass preparation methods for suspension-firing: the processes and their impacts on critical issues in biomass suspension-firing. The first-generation preparation method, based on raw biomass, was successfully used for biomass suspension co-firing at low shares and nowadays is mainly used for other combustion technologies, due to the large particles it produces. The second-generation method, based on biopellets, is commonly used in existing suspension-firing plants. It can reduce biomass particle size to 85% < 1 mm (maximum 3 mm), ensuring good ignition and particle burnout. 100% biomass suspension-firing is mainly for high-quality biomass and often uses additives to mitigate corrosion. To improve fuel rangeability, the third-generation method will be prevailing. It includes extra thermal pre-treatment for increasing the energy density and grindability of the feedstock. Suspension-firing trials of torrefied biopellets are performed at several power plants. It is too costly in the present energy market and can be promoted by a future regulatory condition change in favor of alternative solid fuel sources.

Suggested Citation

  • Yin, Chungen, 2020. "Development in biomass preparation for suspension firing towards higher biomass shares and better boiler performance and fuel rangeability," Energy, Elsevier, vol. 196(C).
    • Handle: RePEc:eee:energy:v:196:y:2020:i:c:s036054422030236x
    DOI: 10.1016/j.energy.2020.117129
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S036054422030236X
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2020.117129?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Lasek, Janusz A. & Kopczyński, Marcin & Janusz, Marcin & Iluk, Andrzej & Zuwała, Jarosław, 2017. "Combustion properties of torrefied biomass obtained from flue gas-enhanced reactor," Energy, Elsevier, vol. 119(C), pages 362-368.
    2. Cai, Yongtie & Tay, Kunlin & Zheng, Zhimin & Yang, Wenming & Wang, Hui & Zeng, Guang & Li, Zhiwang & Keng Boon, Siah & Subbaiah, Prabakaran, 2018. "Modeling of ash formation and deposition processes in coal and biomass fired boilers: A comprehensive review," Applied Energy, Elsevier, vol. 230(C), pages 1447-1544.
    3. Tabet, F. & Gökalp, I., 2015. "Review on CFD based models for co-firing coal and biomass," Renewable and Sustainable Energy Reviews, Elsevier, vol. 51(C), pages 1101-1114.
    4. Mun, Tae-Young & Tumsa, Tefera Zelalem & Lee, Uendo & Yang, Won, 2016. "Performance evaluation of co-firing various kinds of biomass with low rank coals in a 500 MWe coal-fired power plant," Energy, Elsevier, vol. 115(P1), pages 954-962.
    5. Nunes, L.J.R. & Matias, J.C.O. & Catalão, J.P.S., 2016. "Biomass combustion systems: A review on the physical and chemical properties of the ashes," Renewable and Sustainable Energy Reviews, Elsevier, vol. 53(C), pages 235-242.
    6. Bach, Quang-Vu & Skreiberg, Øyvind, 2016. "Upgrading biomass fuels via wet torrefaction: A review and comparison with dry torrefaction," Renewable and Sustainable Energy Reviews, Elsevier, vol. 54(C), pages 665-677.
    7. Pérez-Jeldres, Rubén & Cornejo, Pablo & Flores, Mauricio & Gordon, Alfredo & García, Ximena, 2017. "A modeling approach to co-firing biomass/coal blends in pulverized coal utility boilers: Synergistic effects and emissions profiles," Energy, Elsevier, vol. 120(C), pages 663-674.
    8. Qi, Jianhui & Han, Kuihua & Wang, Qian & Gao, Jie, 2017. "Carbonization of biomass: Effect of additives on alkali metals residue, SO2 and NO emission of chars during combustion," Energy, Elsevier, vol. 130(C), pages 560-569.
    9. Tymoszuk, Mateusz & Mroczek, Kazimierz & Kalisz, Sylwester & Kubiczek, Henryk, 2019. "An investigation of biomass grindability," Energy, Elsevier, vol. 183(C), pages 116-126.
    10. Touš, Michal & Pavlas, Martin & Stehlík, Petr & Popela, Pavel, 2011. "Effective biomass integration into existing combustion plant," Energy, Elsevier, vol. 36(8), pages 4654-4662.
    11. Kazagic, A. & Smajevic, I., 2009. "Synergy effects of co-firing wooden biomass with Bosnian coal," Energy, Elsevier, vol. 34(5), pages 699-707.
    12. Stroh, Alexander & Alobaid, Falah & Busch, Jan-Peter & Ströhle, Jochen & Epple, Bernd, 2015. "3-D numerical simulation for co-firing of torrefied biomass in a pulverized-fired 1 MWth combustion chamber," Energy, Elsevier, vol. 85(C), pages 105-116.
    13. Kafle, Sagar & Euh, Seung Hee & Cho, Lahoon & Nam, Yun Seong & Oh, Kwang Cheol & Choi, Yun Sung & Oh, Jae-Heun & Kim, Dae Hyun, 2017. "Tar fouling reduction in wood pellet boiler using additives and study the effects of additives on the characteristics of pellets," Energy, Elsevier, vol. 129(C), pages 79-85.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Mingzi Xu & Changdong Sheng, 2022. "Modeling the Process and Properties of Ash Formation during Pulverized Biomass Combustion," Energies, MDPI, vol. 15(12), pages 1-17, June.
    2. Wenxiao Chu & Francesco Calise & Neven Duić & Poul Alberg Østergaard & Maria Vicidomini & Qiuwang Wang, 2020. "Recent Advances in Technology, Strategy and Application of Sustainable Energy Systems," Energies, MDPI, vol. 13(19), pages 1-29, October.
    3. Joseph Oyekale & Mario Petrollese & Vittorio Tola & Giorgio Cau, 2020. "Impacts of Renewable Energy Resources on Effectiveness of Grid-Integrated Systems: Succinct Review of Current Challenges and Potential Solution Strategies," Energies, MDPI, vol. 13(18), pages 1-48, September.
    4. Roeland De Meulenaere & Tim Maertens & Ale Sikkema & Rune Brusletto & Tanja Barth & Julien Blondeau, 2021. "Energetic and Exergetic Performances of a Retrofitted, Large-Scale, Biomass-Fired CHP Coupled to a Steam-Explosion Biomass Upgrading Plant, a Biorefinery Process and a High-Temperature Heat Network," Energies, MDPI, vol. 14(22), pages 1-15, November.
    5. Guzović, Zvonimir & Duic, Neven & Piacentino, Antonio & Markovska, Natasa & Mathiesen, Brian Vad & Lund, Henrik, 2022. "Recent advances in methods, policies and technologies at sustainable energy systems development," Energy, Elsevier, vol. 245(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Pronobis, Marek & Wejkowski, Robert & Kalisz, Sylwester & Ciukaj, Szymon, 2023. "Conversion of a pulverized coal boiler into a torrefied biomass boiler," Energy, Elsevier, vol. 262(PB).
    2. Dong, Leilei & Alexiadis, Alessio, 2023. "Simulation of char burnout characteristics of biomass/coal blend with a simplified single particle reaction model," Energy, Elsevier, vol. 264(C).
    3. Wander, Paulo R. & Bianchi, Flávio M. & Caetano, Nattan R. & Klunk, Marcos A. & Indrusiak, Maria Luiza S., 2020. "Cofiring low-rank coal and biomass in a bubbling fluidized bed with varying excess air ratio and fluidization velocity," Energy, Elsevier, vol. 203(C).
    4. Aviso, K.B. & Sy, C.L. & Tan, R.R. & Ubando, A.T., 2020. "Fuzzy optimization of carbon management networks based on direct and indirect biomass co-firing," Renewable and Sustainable Energy Reviews, Elsevier, vol. 132(C).
    5. Kopczyński, Marcin & Lasek, Janusz A. & Iluk, Andrzej & Zuwała, Jarosław, 2017. "The co-combustion of hard coal with raw and torrefied biomasses (willow (Salix viminalis), olive oil residue and waste wood from furniture manufacturing)," Energy, Elsevier, vol. 140(P1), pages 1316-1325.
    6. Sher, Farooq & Yaqoob, Aqsa & Saeed, Farrukh & Zhang, Shengfu & Jahan, Zaib & Klemeš, Jiří Jaromír, 2020. "Torrefied biomass fuels as a renewable alternative to coal in co-firing for power generation," Energy, Elsevier, vol. 209(C).
    7. Jae-Hyun Park & Young-Chan Choi & Young-Joo Lee & Hyung-Taek Kim, 2020. "Characteristics of Miscanthus Fuel by Wet Torrefaction on Fuel Upgrading and Gas Emission Behavior," Energies, MDPI, vol. 13(10), pages 1-10, May.
    8. Luan, Chao & You, Changfu & Zhang, Dongke, 2014. "Composition and sintering characteristics of ashes from co-firing of coal and biomass in a laboratory-scale drop tube furnace," Energy, Elsevier, vol. 69(C), pages 562-570.
    9. Zacharczuk, Wojciech & Andruszkiewicz, Artur & Tatarek, Andrzej & Alahmer, Ali & Alsaqoor, Sameh, 2021. "Effect of Ca-based additives on the capture of SO2 during combustion of pulverized lignite," Energy, Elsevier, vol. 231(C).
    10. Szufa, S. & Piersa, P. & Junga, R. & Błaszczuk, A. & Modliński, N. & Sobek, S. & Marczak-Grzesik, M. & Adrian, Ł. & Dzikuć, M., 2023. "Numerical modeling of the co-firing process of an in situ steam-torrefied biomass with coal in a 230 MW industrial-scale boiler," Energy, Elsevier, vol. 263(PE).
    11. da Silva, Carlos Miguel Simões & Carneiro, Angélica de Cássia Oliveira & Vital, Benedito Rocha & Figueiró, Clarissa Gusmão & Fialho, Lucas de Freitas & de Magalhães, Mateus Alves & Carvalho, Amélia Gu, 2018. "Biomass torrefaction for energy purposes – Definitions and an overview of challenges and opportunities in Brazil," Renewable and Sustainable Energy Reviews, Elsevier, vol. 82(P3), pages 2426-2432.
    12. Wilk, Małgorzata & Magdziarz, Aneta, 2017. "Hydrothermal carbonization, torrefaction and slow pyrolysis of Miscanthus giganteus," Energy, Elsevier, vol. 140(P1), pages 1292-1304.
    13. Abdulyekeen, Kabir Abogunde & Umar, Ahmad Abulfathi & Patah, Muhamad Fazly Abdul & Daud, Wan Mohd Ashri Wan, 2021. "Torrefaction of biomass: Production of enhanced solid biofuel from municipal solid waste and other types of biomass," Renewable and Sustainable Energy Reviews, Elsevier, vol. 150(C).
    14. Ramos, Ana & Monteiro, Eliseu & Rouboa, Abel, 2019. "Numerical approaches and comprehensive models for gasification process: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 110(C), pages 188-206.
    15. Li, Fenghai & Zhao, Chaoyue & Guo, Qianqian & Li, Yang & Fan, Hongli & Guo, Mingxi & Wu, Lishun & Huang, Jiejie & Fang, Yitian, 2020. "Exploration in ash-deposition (AD) behavior modification of low-rank coal by manure addition," Energy, Elsevier, vol. 208(C).
    16. Yi Zhang & Guanmin Zhang & Min Wei & Zhenqiang Gao & Maocheng Tian & Fang He, 2019. "Comparisons of Acid and Water Solubilities of Rice Straw Ash Together with Its Major Ash-Forming Elements at Different Ashing Temperatures: An Experimental Study," Sustainability, MDPI, vol. 11(7), pages 1-18, April.
    17. Qi, Jianhui & Zhao, Jianli & Xu, Yang & Wang, Yongjia & Han, Kuihua, 2018. "Segmented heating carbonization of biomass: Yields, property and estimation of heating value of chars," Energy, Elsevier, vol. 144(C), pages 301-311.
    18. Batidzirai, B. & Mignot, A.P.R. & Schakel, W.B. & Junginger, H.M. & Faaij, A.P.C., 2013. "Biomass torrefaction technology: Techno-economic status and future prospects," Energy, Elsevier, vol. 62(C), pages 196-214.
    19. Joanna Wnorowska & Waldemar Gądek & Sylwester Kalisz, 2020. "Statistical Model for Prediction of Ash Fusion Temperatures from Additive Doped Biomass," Energies, MDPI, vol. 13(24), pages 1-21, December.
    20. Kumar, R. & Strezov, V., 2021. "Thermochemical production of bio-oil: A review of downstream processing technologies for bio-oil upgrading, production of hydrogen and high value-added products," Renewable and Sustainable Energy Reviews, Elsevier, vol. 135(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:196:y:2020:i:c:s036054422030236x. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.