IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v150y2018icp890-900.html
   My bibliography  Save this article

Improved electrochemical performance of EMIMFSI ionic liquid based gel polymer electrolyte with temperature for rechargeable lithium battery

Author

Listed:
  • Singh, Shishir Kumar
  • Shalu,
  • Balo, Liton
  • Gupta, Himani
  • Singh, Varun Kumar
  • Tripathi, Alok Kumar
  • Verma, Yogendra Lal
  • Singh, Rajendra Kumar

Abstract

Free-standing, flexible ionic liquid based gel polymer electrolyte (ILGPE) membranes containing polymer PVdF-HFP, imidazolium-based ionic liquid EMIMFSI with lithium salt LiTFSI are synthesized and characterized by various techniques. Thermal, electrochemical and electrical properties of prepared ILGPE membranes are investigated by thermogravimetric analysis, linear sweep voltammetry, cyclic voltammetry and impedance spectroscopy techniques. Prepared membranes are found to be thermally stable upto 200 °C. The ionic conductivity is found to be ∼3.8 × 10−4 S cm−1 at 25 °C and ∼6.0 × 10−4 S cm−1 at 50 °C for 40 wt% IL containing GPE. Lithium transference number and lithium ion conductivity of 40 wt% IL containing GPE shows the maximum value ∼0.4 and ∼1.5 × 10−4 S cm−1 respectively with electrochemical window ∼4.7 V versus Li/Li+ at 25 °C. The 40 wt% IL containing GPE is used for battery application because of its better compatibility with lithium electrode compared to other prepared ILGPEs. The discharge capacity attains a maximum value ∼141.2 mAh g−1 and ∼160.3 mAh g−1 at 25 °C and 50 °C respectively at 0.1C. About ∼99% Coulombic efficiency is obtained upto 100th cycles at 50 °C. These results indicate that the Li/40 wt% IL containing GPE/LiFePO4 cell shows high Coulombic efficiency, good charge-discharge capacity and cyclic stability upto 100th cycles.

Suggested Citation

  • Singh, Shishir Kumar & Shalu, & Balo, Liton & Gupta, Himani & Singh, Varun Kumar & Tripathi, Alok Kumar & Verma, Yogendra Lal & Singh, Rajendra Kumar, 2018. "Improved electrochemical performance of EMIMFSI ionic liquid based gel polymer electrolyte with temperature for rechargeable lithium battery," Energy, Elsevier, vol. 150(C), pages 890-900.
  • Handle: RePEc:eee:energy:v:150:y:2018:i:c:p:890-900
    DOI: 10.1016/j.energy.2018.03.024
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544218304225
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.energy.2018.03.024?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Situ, Wenfu & Zhang, Guoqing & Li, Xinxi & Yang, Xiaoqing & Wei, Chao & Rao, Mumin & Wang, Ziyuan & Wang, Cong & Wu, Weixiong, 2017. "A thermal management system for rectangular LiFePO4 battery module using novel double copper mesh-enhanced phase change material plates," Energy, Elsevier, vol. 141(C), pages 613-623.
    2. Xu, Meng & Zhang, Zhuqian & Wang, Xia & Jia, Li & Yang, Lixin, 2015. "A pseudo three-dimensional electrochemical–thermal model of a prismatic LiFePO4 battery during discharge process," Energy, Elsevier, vol. 80(C), pages 303-317.
    3. Weng, Guoming & Su, Yuzhi & Liu, Zhaoqing & Zhang, Jianhua & Dong, Wen & Xu, Changwei, 2009. "Electrochemical properties of novel organodisulfide poly 1,2-bis(thiophen-3-ylmethyl)disulfane as cathode material for secondary lithium batteries," Energy, Elsevier, vol. 34(9), pages 1351-1354.
    4. Ng, Kong Soon & Moo, Chin-Sien & Chen, Yi-Ping & Hsieh, Yao-Ching, 2009. "Enhanced coulomb counting method for estimating state-of-charge and state-of-health of lithium-ion batteries," Applied Energy, Elsevier, vol. 86(9), pages 1506-1511, September.
    5. He, Hongwen & Zhang, Xiaowei & Xiong, Rui & Xu, Yongli & Guo, Hongqiang, 2012. "Online model-based estimation of state-of-charge and open-circuit voltage of lithium-ion batteries in electric vehicles," Energy, Elsevier, vol. 39(1), pages 310-318.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Jie Yang & Fu Gu & Jianfeng Guo & Bin Chen, 2019. "Comparative Life Cycle Assessment of Mobile Power Banks with Lithium-Ion Battery and Lithium-Ion Polymer Battery," Sustainability, MDPI, vol. 11(19), pages 1-24, September.
    2. Duan, Hanbing & Zhang, Wenye & Guo, Zhongyuan & Su, Xiaoxiang & Liu, Yongcun & Meng, Hao & Yu, Xiang & Qin, Gang & Chen, Qiang & Yang, Jia, 2023. "Tough, highly adaptable and self-healing integrated supercapacitor based on double network gel polymer electrolyte," Energy, Elsevier, vol. 264(C).
    3. Guo, Fei & Wu, Xiongwei & Liu, Lili & Ye, Jilei & Wang, Tao & Fu, Lijun & Wu, Yuping, 2023. "Prediction of remaining useful life and state of health of lithium batteries based on time series feature and Savitzky-Golay filter combined with gated recurrent unit neural network," Energy, Elsevier, vol. 270(C).
    4. Rajamani, Arunkumar & Panneerselvam, Thamayanthi & Murugan, Ramaswamy & Ramaswamy, Arun Prasath, 2023. "Electrospun derived polymer-garnet composite quasi solid state electrolyte with low interface resistance for lithium metal batteries," Energy, Elsevier, vol. 263(PE).
    5. Tan Thong, Pham & Sadhasivam, T. & Kim, Nam-In & Kim, Yoong Ahm & Roh, Sung-Hee & Jung, Ho-Young, 2021. "Highly conductive current collector for enhancing conductivity and power supply of flexible thin-film Zn–MnO2 battery," Energy, Elsevier, vol. 221(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Zhao, Xiaowei & Cai, Yishan & Yang, Lin & Deng, Zhongwei & Qiang, Jiaxi, 2017. "State of charge estimation based on a new dual-polarization-resistance model for electric vehicles," Energy, Elsevier, vol. 135(C), pages 40-52.
    2. Yang, Fangfang & Li, Weihua & Li, Chuan & Miao, Qiang, 2019. "State-of-charge estimation of lithium-ion batteries based on gated recurrent neural network," Energy, Elsevier, vol. 175(C), pages 66-75.
    3. Shyh-Chin Huang & Kuo-Hsin Tseng & Jin-Wei Liang & Chung-Liang Chang & Michael G. Pecht, 2017. "An Online SOC and SOH Estimation Model for Lithium-Ion Batteries," Energies, MDPI, vol. 10(4), pages 1-18, April.
    4. Yang, Zunxian & Meng, Qing & Yan, Wenhuan & Lv, Jun & Guo, Zaiping & Yu, Xuebin & Chen, Zhixin & Guo, Tailiang & Zeng, Rong, 2015. "Novel three-dimensional tin/carbon hybrid core/shell architecture with large amount of solid cross-linked micro/nanochannels for lithium ion battery application," Energy, Elsevier, vol. 82(C), pages 960-967.
    5. Taimoor Zahid & Weimin Li, 2016. "A Comparative Study Based on the Least Square Parameter Identification Method for State of Charge Estimation of a LiFePO 4 Battery Pack Using Three Model-Based Algorithms for Electric Vehicles," Energies, MDPI, vol. 9(9), pages 1-16, September.
    6. Zahid, Taimoor & Xu, Kun & Li, Weimin & Li, Chenming & Li, Hongzhe, 2018. "State of charge estimation for electric vehicle power battery using advanced machine learning algorithm under diversified drive cycles," Energy, Elsevier, vol. 162(C), pages 871-882.
    7. Hannan, M.A. & Lipu, M.S.H. & Hussain, A. & Mohamed, A., 2017. "A review of lithium-ion battery state of charge estimation and management system in electric vehicle applications: Challenges and recommendations," Renewable and Sustainable Energy Reviews, Elsevier, vol. 78(C), pages 834-854.
    8. Xing, Yinjiao & He, Wei & Pecht, Michael & Tsui, Kwok Leung, 2014. "State of charge estimation of lithium-ion batteries using the open-circuit voltage at various ambient temperatures," Applied Energy, Elsevier, vol. 113(C), pages 106-115.
    9. Shuqing Li & Chuankun Ju & Jianliang Li & Ri Fang & Zhifei Tao & Bo Li & Tingting Zhang, 2021. "State-of-Charge Estimation of Lithium-Ion Batteries in the Battery Degradation Process Based on Recurrent Neural Network," Energies, MDPI, vol. 14(2), pages 1-21, January.
    10. Yang, Zunxian & Meng, Qing & Guo, Zaiping & Yu, Xuebin & Guo, Tailiang & Zeng, Rong, 2013. "Highly reversible lithium storage in uniform Li4Ti5O12/carbon hybrid nanowebs as anode material for lithium-ion batteries," Energy, Elsevier, vol. 55(C), pages 925-932.
    11. Wang, Yujie & Zhang, Chenbin & Chen, Zonghai, 2015. "A method for state-of-charge estimation of Li-ion batteries based on multi-model switching strategy," Applied Energy, Elsevier, vol. 137(C), pages 427-434.
    12. Avvari, G.V. & Pattipati, B. & Balasingam, B. & Pattipati, K.R. & Bar-Shalom, Y., 2015. "Experimental set-up and procedures to test and validate battery fuel gauge algorithms," Applied Energy, Elsevier, vol. 160(C), pages 404-418.
    13. Yang, Fangfang & Zhang, Shaohui & Li, Weihua & Miao, Qiang, 2020. "State-of-charge estimation of lithium-ion batteries using LSTM and UKF," Energy, Elsevier, vol. 201(C).
    14. Chen, Biao & Jiang, Haobin & Chen, Xijia & Li, Huanhuan, 2022. "Robust state-of-charge estimation for lithium-ion batteries based on an improved gas-liquid dynamics model," Energy, Elsevier, vol. 238(PC).
    15. Shichun Yang & Cheng Deng & Yulong Zhang & Yongling He, 2017. "State of Charge Estimation for Lithium-Ion Battery with a Temperature-Compensated Model," Energies, MDPI, vol. 10(10), pages 1-14, October.
    16. Liu, Mengmeng & Xu, Jun & Jiang, Yihui & Mei, Xuesong, 2023. "Multi-dimensional features based data-driven state of charge estimation method for LiFePO4 batteries," Energy, Elsevier, vol. 274(C).
    17. Donghoon Shin & Beomjin Yoon & Seungryeol Yoo, 2021. "Compensation Method for Estimating the State of Charge of Li-Polymer Batteries Using Multiple Long Short-Term Memory Networks Based on the Extended Kalman Filter," Energies, MDPI, vol. 14(2), pages 1-19, January.
    18. Hui Pang & Fengqi Zhang, 2018. "Experimental Data-Driven Parameter Identification and State of Charge Estimation for a Li-Ion Battery Equivalent Circuit Model," Energies, MDPI, vol. 11(5), pages 1-14, April.
    19. Huang, Deyang & Chen, Ziqiang & Zheng, Changwen & Li, Haibin, 2019. "A model-based state-of-charge estimation method for series-connected lithium-ion battery pack considering fast-varying cell temperature," Energy, Elsevier, vol. 185(C), pages 847-861.
    20. Li, Shi & Pischinger, Stefan & He, Chaoyi & Liang, Liliuyuan & Stapelbroek, Michael, 2018. "A comparative study of model-based capacity estimation algorithms in dual estimation frameworks for lithium-ion batteries under an accelerated aging test," Applied Energy, Elsevier, vol. 212(C), pages 1522-1536.

    More about this item

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:150:y:2018:i:c:p:890-900. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.