IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v307y2022ics0306261921014938.html
   My bibliography  Save this article

Optical-thermal-mechanical characteristics of an ultra-high-temperature graphite receiver designed for concentrating solar power

Author

Listed:
  • Zhang, Yuanting
  • Qiu, Yu
  • Li, Qing
  • Henry, Asegun

Abstract

Increasing the fluid outlet temperature of the solar receiver is a promising approach to improve the power cycle efficiency of concentrating solar power. However, the receiver can be potentially damaged by thermal stresses introduced by the high and nonuniform temperature. To capture solar energy safely at ultra-high temperature, we designed a plant-scale receiver using liquid tin as the heat transfer fluid. In the receiver, a secondary concentrator was designed to improve the concentration, and a cylinder-cone graphite cavity was designed to enhance the solar absorption. Meanwhile, the entire receiver was enclosed in an argon environment to protect it from oxidation. After the design, an optical-thermal-mechanical sequential simulation was conducted to evaluate the receiver performance. Based on the simulation, the cylinder length was optimized at the extreme condition with the incident radiative power of 600 kW and the inlet fluid temperature of 1573 K, obtaining an optimized receiver with the cylinder length of 900 mm. Then, performance evaluation indicated that the optimized receiver can operate safely and achieve a receiver efficiency of 60.4%-89.2% with an inlet temperature of 573–1573 K when the incident power is within 300–600 kW. However, if the incident power becomes much higher, the graphite cavity will fracture, especially at relatively low temperature of around 873 K. Moreover, the effects of mass flow rate and cooling conditions were studied, indicating that increasing the mass flow rate at higher temperature has a greater effect on improving the receiver efficiency. Meanwhile, it was found that ambient air cooling is sufficient for the glass cover. However, an additional forced convective cooling device is necessary for the secondary concentrator. These results indicated that the designed receiver is promising for capturing solar energy at high temperature up to 1573 K.

Suggested Citation

  • Zhang, Yuanting & Qiu, Yu & Li, Qing & Henry, Asegun, 2022. "Optical-thermal-mechanical characteristics of an ultra-high-temperature graphite receiver designed for concentrating solar power," Applied Energy, Elsevier, vol. 307(C).
    • Handle: RePEc:eee:appene:v:307:y:2022:i:c:s0306261921014938
    DOI: 10.1016/j.apenergy.2021.118228
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261921014938
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2021.118228?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Qiu, Yu & Zhang, Yuanting & Li, Qing & Xu, Yucong & Wen, Zhe-Xi, 2020. "A novel parabolic trough receiver enhanced by integrating a transparent aerogel and wing-like mirrors," Applied Energy, Elsevier, vol. 279(C).
    2. Zhou, Hao & Li, Yawei & Zuo, Yuhang & Zhou, Mingxi & Fang, Wenfeng & Zhu, Yifan, 2021. "Thermal performance and thermal stress analysis of a 600 MWth solar cylinder external receiver," Renewable Energy, Elsevier, vol. 164(C), pages 331-345.
    3. Peinado Gonzalo, Alfredo & Pliego Marugán, Alberto & García Márquez, Fausto Pedro, 2019. "A review of the application performances of concentrated solar power systems," Applied Energy, Elsevier, vol. 255(C).
    4. He, Ya-Ling & Qiu, Yu & Wang, Kun & Yuan, Fan & Wang, Wen-Qi & Li, Ming-Jia & Guo, Jia-Qi, 2020. "Perspective of concentrating solar power," Energy, Elsevier, vol. 198(C).
    5. M. Caccia & M. Tabandeh-Khorshid & G. Itskos & A. R. Strayer & A. S. Caldwell & S. Pidaparti & S. Singnisai & A. D. Rohskopf & A. M. Schroeder & D. Jarrahbashi & T. Kang & S. Sahoo & N. R. Kadasala & , 2018. "Ceramic–metal composites for heat exchangers in concentrated solar power plants," Nature, Nature, vol. 562(7727), pages 406-409, October.
    6. Conroy, Tim & Collins, Maurice N. & Grimes, Ronan, 2019. "Sodium receiver designs for integration with high temperature power cycles," Energy, Elsevier, vol. 187(C).
    7. Wang, Wujun & Fan, Liwu & Laumert, Björn, 2021. "A theoretical heat transfer analysis of different indirectly-irradiated receiver designs for high-temperature concentrating solar power applications," Renewable Energy, Elsevier, vol. 163(C), pages 1983-1993.
    8. Mohan, Gowtham & Venkataraman, Mahesh B. & Coventry, Joe, 2019. "Sensible energy storage options for concentrating solar power plants operating above 600 °C," Renewable and Sustainable Energy Reviews, Elsevier, vol. 107(C), pages 319-337.
    9. Benoit, H. & Spreafico, L. & Gauthier, D. & Flamant, G., 2016. "Review of heat transfer fluids in tube-receivers used in concentrating solar thermal systems: Properties and heat transfer coefficients," Renewable and Sustainable Energy Reviews, Elsevier, vol. 55(C), pages 298-315.
    10. Rebecca R. Hernandez & Alona Armstrong & Jennifer Burney & Greer Ryan & Kara Moore-O’Leary & Ibrahima Diédhiou & Steven M. Grodsky & Leslie Saul-Gershenz & Rob Davis & Jordan Macknick & Dustin Mulvane, 2019. "Techno–ecological synergies of solar energy for global sustainability," Nature Sustainability, Nature, vol. 2(7), pages 560-568, July.
    11. Qiu, Yu & Li, Ming-Jia & Wang, Kun & Liu, Zhan-Bin & Xue, Xiao-Dai, 2017. "Aiming strategy optimization for uniform flux distribution in the receiver of a linear Fresnel solar reflector using a multi-objective genetic algorithm," Applied Energy, Elsevier, vol. 205(C), pages 1394-1407.
    12. Wang, Kun & He, Ya-Ling & Zhu, Han-Hui, 2017. "Integration between supercritical CO2 Brayton cycles and molten salt solar power towers: A review and a comprehensive comparison of different cycle layouts," Applied Energy, Elsevier, vol. 195(C), pages 819-836.
    13. Wang, Wen-Qi & Qiu, Yu & Li, Ming-Jia & He, Ya-Ling & Cheng, Ze-Dong, 2020. "Coupled optical and thermal performance of a fin-like molten salt receiver for the next-generation solar power tower," Applied Energy, Elsevier, vol. 272(C).
    14. Qiu, Yu & He, Ya-Ling & Li, Peiwen & Du, Bao-Cun, 2017. "A comprehensive model for analysis of real-time optical performance of a solar power tower with a multi-tube cavity receiver," Applied Energy, Elsevier, vol. 185(P1), pages 589-603.
    15. Vignarooban, K. & Xu, Xinhai & Arvay, A. & Hsu, K. & Kannan, A.M., 2015. "Heat transfer fluids for concentrating solar power systems – A review," Applied Energy, Elsevier, vol. 146(C), pages 383-396.
    16. Flores Larsen, S. & Altamirano, M. & Hernández, A., 2012. "Heat loss of a trapezoidal cavity absorber for a linear Fresnel reflecting solar concentrator," Renewable Energy, Elsevier, vol. 39(1), pages 198-206.
    17. C. Amy & D. Budenstein & M. Bagepalli & D. England & F. DeAngelis & G. Wilk & C. Jarrett & C. Kelsall & J. Hirschey & H. Wen & A. Chavan & B. Gilleland & C. Yuan & W. C. Chueh & K. H. Sandhage & Y. Ka, 2017. "Pumping liquid metal at high temperatures up to 1,673 kelvin," Nature, Nature, vol. 550(7675), pages 199-203, October.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Xiao, Yang & Bao, Yanqiong & Yu, Linfeng & Zheng, Xiong & Qin, Guangzhao & Chen, Meijie & He, Maogang, 2023. "Ultra-stable carbon quantum dot nanofluids as excellent spectral beam splitters in PV/T applications," Energy, Elsevier, vol. 273(C).
    2. Dong, Yan & Han, Han & Wang, Fuqiang & Zhang, Yingjie & Cheng, Ziming & Shi, Xuhang & Yan, Yuying, 2022. "A low-cost sustainable coating: Improving passive daytime radiative cooling performance using the spectral band complementarity method," Renewable Energy, Elsevier, vol. 192(C), pages 606-616.
    3. Wang, Jikang & Zhang, Yuanting & Zhang, Weichen & Qiu, Yu & Li, Qing, 2022. "Design and evaluation of a lab-scale tungsten receiver for ultra-high-temperature solar energy harvesting," Applied Energy, Elsevier, vol. 327(C).
    4. Dong, Yan & Zou, Yanan & Li, Xiang & Wang, Fuqiang & Cheng, Ziming & Meng, Weifeng & Chen, Lingling & Xiang, Yang & Wang, Tong & Yan, Yuying, 2023. "Introducing masking layer for daytime radiative cooling coating to realize high optical performance, thin thickness, and excellent durability in long-term outdoor application," Applied Energy, Elsevier, vol. 344(C).
    5. Dong, Yan & Zhang, Xinping & Chen, Lingling & Meng, Weifeng & Wang, Cunhai & Cheng, Ziming & Liang, Huaxu & Wang, Fuqiang, 2023. "Progress in passive daytime radiative cooling: A review from optical mechanism, performance test, and application," Renewable and Sustainable Energy Reviews, Elsevier, vol. 188(C).
    6. Ye, Kai & Li, Qing & Zhang, Yuanting & Qiu, Yu & Liu, Bin, 2022. "An efficient receiver tube enhanced by a solar transparent aerogel for solar power tower," Energy, Elsevier, vol. 261(PB).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Wang, Jikang & Zhang, Yuanting & Zhang, Weichen & Qiu, Yu & Li, Qing, 2022. "Design and evaluation of a lab-scale tungsten receiver for ultra-high-temperature solar energy harvesting," Applied Energy, Elsevier, vol. 327(C).
    2. Qiu, Yu & Xu, Yucong & Li, Qing & Wang, Jikang & Wang, Qiliang & Liu, Bin, 2021. "Efficiency enhancement of a solar trough collector by combining solar and hot mirrors," Applied Energy, Elsevier, vol. 299(C).
    3. Wang, Wen-Qi & Li, Ming-Jia & Jiang, Rui & Hu, Yi-Huang & He, Ya-Ling, 2022. "Receiver with light-trapping nanostructured coating: A possible way to achieve high-efficiency solar thermal conversion for the next-generation concentrating solar power," Renewable Energy, Elsevier, vol. 185(C), pages 159-171.
    4. Wang, Wen-Qi & Li, Ming-Jia & Cheng, Ze-Dong & Li, Dong & Liu, Zhan-Bin, 2021. "Coupled optical-thermal-stress characteristics of a multi-tube external molten salt receiver for the next generation concentrating solar power," Energy, Elsevier, vol. 233(C).
    5. Wang, Wen-Qi & He, Ya-Ling & Jiang, Rui, 2022. "A multi-scale solar receiver with peak receiver efficiency over 90% at 720 °C for the next-generation solar power tower," Renewable Energy, Elsevier, vol. 200(C), pages 714-723.
    6. Wang, Wen-Qi & Li, Ming-Jia & Jiang, Rui & Cheng, Ze-Dong & He, Ya-Ling, 2022. "A comparison between lumped parameter method and computational fluid dynamics method for steady and transient optical-thermal characteristics of the molten salt receiver in solar power tower," Energy, Elsevier, vol. 245(C).
    7. He, Ya-Ling & Qiu, Yu & Wang, Kun & Yuan, Fan & Wang, Wen-Qi & Li, Ming-Jia & Guo, Jia-Qi, 2020. "Perspective of concentrating solar power," Energy, Elsevier, vol. 198(C).
    8. Yang, Jingze & Yang, Zhen & Duan, Yuanyuan, 2022. "A review on integrated design and off-design operation of solar power tower system with S–CO2 Brayton cycle," Energy, Elsevier, vol. 246(C).
    9. Li, Qing & Wang, Jikang & Qiu, Yu & Xu, Mingpan & Wei, Xiudong, 2021. "A modified indirect flux mapping system for high-flux solar simulators," Energy, Elsevier, vol. 235(C).
    10. Yu Qiu & Erqi E & Qing Li, 2023. "Triple-Objective Optimization of SCO 2 Brayton Cycles for Next-Generation Solar Power Tower," Energies, MDPI, vol. 16(14), pages 1-19, July.
    11. Ye, Kai & Li, Qing & Zhang, Yuanting & Qiu, Yu & Liu, Bin, 2022. "An efficient receiver tube enhanced by a solar transparent aerogel for solar power tower," Energy, Elsevier, vol. 261(PB).
    12. Arias, I. & Cardemil, J. & Zarza, E. & Valenzuela, L. & Escobar, R., 2022. "Latest developments, assessments and research trends for next generation of concentrated solar power plants using liquid heat transfer fluids," Renewable and Sustainable Energy Reviews, Elsevier, vol. 168(C).
    13. Wang, Qiliang & Li, Guiqiang & Cao, Jingyu & Hu, Mingke & Pei, Gang & Yang, Hongxing, 2022. "An analytical study on optimal spectral characters of solar absorbing coating and thermal performance potential of solar power tower," Renewable Energy, Elsevier, vol. 200(C), pages 1300-1315.
    14. Wang, Wen-Qi & Qiu, Yu & Li, Ming-Jia & He, Ya-Ling & Cheng, Ze-Dong, 2020. "Coupled optical and thermal performance of a fin-like molten salt receiver for the next-generation solar power tower," Applied Energy, Elsevier, vol. 272(C).
    15. Qiu, Yu & Zhang, Yuanting & Li, Qing & Xu, Yucong & Wen, Zhe-Xi, 2020. "A novel parabolic trough receiver enhanced by integrating a transparent aerogel and wing-like mirrors," Applied Energy, Elsevier, vol. 279(C).
    16. Xue, Xue & Liu, Xiang & Zhu, Yifan & Yuan, Lei & Zhu, Ying & Jin, Kelang & Zhang, Lei & Zhou, Hao, 2023. "Numerical modeling and parametric study of the heat storage process of the 1.05 MW molten salt furnace," Energy, Elsevier, vol. 282(C).
    17. Georgios E. Arnaoutakis & Dimitris Al. Katsaprakakis, 2021. "Concentrating Solar Power Advances in Geometric Optics, Materials and System Integration," Energies, MDPI, vol. 14(19), pages 1-25, September.
    18. Wang, Qiliang & Shen, Boxu & Huang, Junchao & Yang, Honglun & Pei, Gang & Yang, Hongxing, 2021. "A spectral self-regulating parabolic trough solar receiver integrated with vanadium dioxide-based thermochromic coating," Applied Energy, Elsevier, vol. 285(C).
    19. Wang, Kun & Li, Ming-Jia & Guo, Jia-Qi & Li, Peiwen & Liu, Zhan-Bin, 2018. "A systematic comparison of different S-CO2 Brayton cycle layouts based on multi-objective optimization for applications in solar power tower plants," Applied Energy, Elsevier, vol. 212(C), pages 109-121.
    20. Wenjing Ding & Ying Zhou & Miao Gu & Jie Gong & Jinghao Xu, 2022. "Thermal Characteristic of Novel Insulation Materials Designed for Solar Simulator," Energies, MDPI, vol. 15(13), pages 1-13, July.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:307:y:2022:i:c:s0306261921014938. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.