IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v306y2022ipbs0306261921013763.html
   My bibliography  Save this article

Large eddy simulation of soot formation and oxidation for different ambient temperatures and oxygen levels

Author

Listed:
  • Zhang, Min
  • Ong, Jiun Cai
  • Pang, Kar Mun
  • Bai, Xue-Song
  • Walther, Jens H.

Abstract

This paper presents the numerical study of soot formation and oxidation processes across different ambient temperatures (900K, 1000K, and 1100K) and oxygen levels (15% and 21% O2) using large eddy simulation coupled with a two-equation soot model. The predicted ignition delay time, lift-off length and soot distribution show good agreements with the corresponding experimental data. A stronger oxidation of the precursor (C2H2) in the 21% O2 cases results in a lower C2H2 formed, as compared to the 15% O2 cases. The increasing ambient temperature leads to the fuel-richer region (roughly equivalence ratio > 1.6) becoming more favorable for C2H2 formation and, consequently, soot formation. This is more apparent in the 15% O2 cases due to a weaker oxidation of C2H2 via O and OH radicals. As a result, the difference in the soot mass between the 15% and 21% O2 cases becomes larger as the ambient temperature increases. The effects of ambient temperature and O2 level on soot sub-processes are investigated. In addition to the flame temperature, OH mass and soot surface area are the dominant parameters in the oxidation processes via OH and O2 at varying O2 levels, respectively.

Suggested Citation

  • Zhang, Min & Ong, Jiun Cai & Pang, Kar Mun & Bai, Xue-Song & Walther, Jens H., 2022. "Large eddy simulation of soot formation and oxidation for different ambient temperatures and oxygen levels," Applied Energy, Elsevier, vol. 306(PB).
    • Handle: RePEc:eee:appene:v:306:y:2022:i:pb:s0306261921013763
    DOI: 10.1016/j.apenergy.2021.118094
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261921013763
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2021.118094?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Gehmlich, R.K. & Mueller, C.J. & Ruth, D.J. & Nilsen, C.W. & Skeen, S.A. & Manin, J., 2018. "Using ducted fuel injection to attenuate or prevent soot formation in mixing-controlled combustion strategies for engine applications," Applied Energy, Elsevier, vol. 226(C), pages 1169-1186.
    2. Gong, Cheng & Jangi, Mehdi & Bai, Xue-Song, 2014. "Large eddy simulation of n-Dodecane spray combustion in a high pressure combustion vessel," Applied Energy, Elsevier, vol. 136(C), pages 373-381.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Wu, Runmin & Song, Xudong & Guo, Qinghua & Liu, Dong & Wei, Juntao & Wang, Jiaofei & Bai, Yonghui & Yu, Guangsuo, 2023. "Study on the application of laser diagnosis technology in the rapid real time measurement of soot," Applied Energy, Elsevier, vol. 350(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Liu, Xinlei & Wang, Hu & Wang, Xiaofeng & Zheng, Zunqing & Yao, Mingfa, 2017. "Experimental and modelling investigations of the diesel surrogate fuels in direct injection compression ignition combustion," Applied Energy, Elsevier, vol. 189(C), pages 187-200.
    2. Djati Wibowo Djamari & Muhammad Idris & Permana Andi Paristiawan & Muhammad Mujtaba Abbas & Olusegun David Samuel & Manzoore Elahi M. Soudagar & Safarudin Gazali Herawan & Davannendran Chandran & Abdu, 2022. "Diesel Spray: Development of Spray in Diesel Engine," Sustainability, MDPI, vol. 14(23), pages 1-22, November.
    3. Zhong, Shenghui & Xu, Shijie & Bai, Xue-Song & Peng, Zhijun & Zhang, Fan, 2021. "Large eddy simulation of n-heptane/syngas pilot ignition spray combustion: Ignition process, liftoff evolution and pollutant emissions," Energy, Elsevier, vol. 233(C).
    4. Wu, Shaohua & Zhou, Dezhi & Yang, Wenming, 2019. "Implementation of an efficient method of moments for treatment of soot formation and oxidation processes in three-dimensional engine simulations," Applied Energy, Elsevier, vol. 254(C).
    5. Raza, Mohsin & Wang, Hu & Yao, Mingfa, 2019. "Numerical investigation of reactivity controlled compression ignition (RCCI) using different multi-component surrogate combinations of diesel and gasoline," Applied Energy, Elsevier, vol. 242(C), pages 462-479.
    6. Thomas Lauer & Jens Frühhaber, 2020. "Towards a Predictive Simulation of Turbulent Combustion?—An Assessment for Large Internal Combustion Engines," Energies, MDPI, vol. 14(1), pages 1-26, December.
    7. Jia, Guorui & Wang, Hu & Tong, Laihui & Wang, Xiaofeng & Zheng, Zunqing & Yao, Mingfa, 2017. "Experimental and numerical studies on three gasoline surrogates applied in gasoline compression ignition (GCI) mode," Applied Energy, Elsevier, vol. 192(C), pages 59-70.
    8. Fischer, M. & Jiang, X., 2015. "Numerical optimisation for model evaluation in combustion kinetics," Applied Energy, Elsevier, vol. 156(C), pages 793-803.
    9. Wen, Xu & Luo, Kun & Luo, Yujuan & Kassem, Hassan I. & Jin, Hanhui & Fan, Jianren, 2016. "Large eddy simulation of a semi-industrial scale coal furnace using non-adiabatic three-stream flamelet/progress variable model," Applied Energy, Elsevier, vol. 183(C), pages 1086-1097.
    10. Łukasz Rymaniak & Michalina Kamińska & Natalia Szymlet & Rafał Grzeszczyk, 2021. "Analysis of Harmful Exhaust Gas Concentrations in Cloud behind a Vehicle with a Spark Ignition Engine," Energies, MDPI, vol. 14(6), pages 1-16, March.
    11. Rickard Solsjö & Mehdi Jangi & Bengt Johansson & Xue-Song Bai, 2020. "The Role of Multiple Injections on Combustion in a Light-Duty PPC Engine," Energies, MDPI, vol. 13(21), pages 1-18, October.
    12. Daniel Romeo Kamta Legue & Zacharie Merlin Ayissi & Mahamat Hassane Babikir & Marcel Obounou & Henri Paul Ekobena Fouda, 2021. "Experimental and Simulation of Diesel Engine Fueled with Biodiesel with Variations in Heat Loss Model," Energies, MDPI, vol. 14(6), pages 1-17, March.
    13. Payri, Raúl & Salvador, F.J. & Manin, Julien & Viera, Alberto, 2016. "Diesel ignition delay and lift-off length through different methodologies using a multi-hole injector," Applied Energy, Elsevier, vol. 162(C), pages 541-550.
    14. Xu, Shijie & Zhong, Shenghui & Pang, Kar Mun & Yu, Senbin & Jangi, Mehdi & Bai, Xue-song, 2020. "Effects of ambient methanol on pollutants formation in dual-fuel spray combustion at varying ambient temperatures: A large-eddy simulation," Applied Energy, Elsevier, vol. 279(C).
    15. Zdzisław Bielecki & Marek Ochowiak & Sylwia Włodarczak & Andżelika Krupińska & Magdalena Matuszak & Robert Lewtak & Jarosław Dziuba & Ernest Szajna & Dariusz Choiński & Marcin Odziomek, 2021. "The Analysis of the Possibility of Feeding a Liquid Catalyst to a Coal Dust Channel," Energies, MDPI, vol. 14(24), pages 1-14, December.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:306:y:2022:i:pb:s0306261921013763. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.