IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v262y2020ics0306261920300313.html
   My bibliography  Save this article

Investigation of high load operation of spark-ignited over-expanded Atkinson cycle engine

Author

Listed:
  • Yang, Zhuyong
  • Miganakallu, Niranjan
  • Miller, Tyler
  • Bonfochi Vinhaes, Vinicius
  • Worm, Jeremy
  • Naber, Jeffrey
  • Roth, David

Abstract

A boosted spark-ignited over-expanded engine was investigated through 1-D engine simulation. A conventional 4-stroke turbocharged spark-ignited engine with 10.5:1 compression ratio (CR) was selected as the baseline engine. The Atkinson cycle engine model was developed and calibrated based on a multi-link mechanism. The compression ratio (CR) and over expansion ratio (OER) of the Atkinson cycle engine are 10.5 and 1.5, respectively. Two speed and load conditions of 1500 rpm, 13 bar net indicated mean effective pressure (IMEPnet) and 3500 rpm, 20 bar IMEPnet with valve timing optimization were investigated. Results depict that the increase in indicated efficiency of Atkinson cycle engine was from both portions of over-expansion and non-over-expansion portion of the cycle. Atkinson cycle engine benefits from lower knock propensity and lower exhaust temperature. At 1500 rpm, 13 bar IMEPnet, the simulation results indicated that energy loss due to combustion phasing was 2.1% and 0.4% for baseline and Atkinson cycle engine. Net indicated efficiency of Atkinson cycle engine was increased by 16%. At 3500 rpm, 20 bar IMEPnet, baseline engine was operated at knock limited spark timing and fuel enrichment to reduce the turbine-inlet temperature. Net indicated efficiency of optimized Atkinson cycle engine at 3500 rpm 20 bar IMEPnet was higher by 27% in comparison to the optimized baseline engine. The combustion phasing loss was 1.2% and 0.6% for baseline and Atkinson cycle engine, respectively. The energy loss due to fuel enrichment was 6.0% and 1.6% for baseline engine and Atkinson cycle engine, respectively, indicating that the Atkinson cycle engine was beneficial to maximize its efficiency.

Suggested Citation

  • Yang, Zhuyong & Miganakallu, Niranjan & Miller, Tyler & Bonfochi Vinhaes, Vinicius & Worm, Jeremy & Naber, Jeffrey & Roth, David, 2020. "Investigation of high load operation of spark-ignited over-expanded Atkinson cycle engine," Applied Energy, Elsevier, vol. 262(C).
  • Handle: RePEc:eee:appene:v:262:y:2020:i:c:s0306261920300313
    DOI: 10.1016/j.apenergy.2020.114519
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261920300313
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.apenergy.2020.114519?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Wei, Haiqiao & Zhu, Tianyu & Shu, Gequn & Tan, Linlin & Wang, Yuesen, 2012. "Gasoline engine exhaust gas recirculation – A review," Applied Energy, Elsevier, vol. 99(C), pages 534-544.
    2. Bozza, Fabio & De Bellis, Vincenzo & Teodosio, Luigi, 2016. "Potentials of cooled EGR and water injection for knock resistance and fuel consumption improvements of gasoline engines," Applied Energy, Elsevier, vol. 169(C), pages 112-125.
    3. Zhao, Jinxing, 2017. "Research and application of over-expansion cycle (Atkinson and Miller) engines – A review," Applied Energy, Elsevier, vol. 185(P1), pages 300-319.
    4. Zhen, Xudong & Wang, Yang & Xu, Shuaiqing & Zhu, Yongsheng & Tao, Chengjun & Xu, Tao & Song, Mingzhi, 2012. "The engine knock analysis – An overview," Applied Energy, Elsevier, vol. 92(C), pages 628-636.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Cruz, José Ramón Serrano & López, J. Javier & Climent, Héctor & Gómez-Vilanova, Alejandro, 2023. "Method for turbocharging and supercharging 2-stroke engines, applied to an opposed-piston new concept for hybrid powertrains," Applied Energy, Elsevier, vol. 351(C).
    2. Liu, Qi & Guo, Tao & Fu, Jianqin & Dai, Hongliang & Liu, Jingping, 2022. "Experimental study on the effects of injection parameters and exhaust gas recirculation on combustion, emission and performance of Atkinson cycle gasoline direct-injection engine," Energy, Elsevier, vol. 238(PB).
    3. Li, Yangyang & Zhou, Shi & Liu, Jingping & Tong, Ji & Dang, Jian & Yang, Fuyuan & Ouyang, Minggao, 2023. "Multi-objective optimization of the Atkinson cycle gasoline engine using NSGA Ⅲ coupled with support vector machine and back-propagation algorithm," Energy, Elsevier, vol. 262(PA).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Li, Yangtao & Khajepour, Amir & Devaud, Cécile, 2018. "Realization of variable Otto-Atkinson cycle using variable timing hydraulic actuated valve train for performance and efficiency improvements in unthrottled gasoline engines," Applied Energy, Elsevier, vol. 222(C), pages 199-215.
    2. Zhao, Jinxing, 2017. "Research and application of over-expansion cycle (Atkinson and Miller) engines – A review," Applied Energy, Elsevier, vol. 185(P1), pages 300-319.
    3. Li, Yangtao & Khajepour, Amir & Devaud, Cécile & Liu, Kaimin, 2017. "Power and fuel economy optimizations of gasoline engines using hydraulic variable valve actuation system," Applied Energy, Elsevier, vol. 206(C), pages 577-593.
    4. Teodosio, Luigi & Pirrello, Dino & Berni, Fabio & De Bellis, Vincenzo & Lanzafame, Rosario & D'Adamo, Alessandro, 2018. "Impact of intake valve strategies on fuel consumption and knock tendency of a spark ignition engine," Applied Energy, Elsevier, vol. 216(C), pages 91-104.
    5. Jung, Dongwon & Lee, Sejun, 2018. "An investigation on the potential of dedicated exhaust gas recirculation for improving thermal efficiency of stoichiometric and lean spark ignition engine operation," Applied Energy, Elsevier, vol. 228(C), pages 1754-1766.
    6. Rocha, Déborah Domingos da & de Castro Radicchi, Fábio & Lopes, Gustavo Santos & Brunocilla, Marcello Francisco & Gomes, Paulo César de Ferreira & Santos, Nathalia Duarte Souza Alvarenga & Malaquias, , 2021. "Study of the water injection control parameters on combustion performance of a spark-ignition engine," Energy, Elsevier, vol. 217(C).
    7. De Bellis, Vincenzo, 2016. "Performance optimization of a spark-ignition turbocharged VVA engine under knock limited operation," Applied Energy, Elsevier, vol. 164(C), pages 162-174.
    8. Xu, Han & Gao, Jian & Yao, Anren & Yao, Chunde, 2018. "The effect of the energy convergence and energy dissipation on the formation of severe knock," Applied Energy, Elsevier, vol. 228(C), pages 1243-1254.
    9. Nguyen Xuan Khoa & Ocktaeck Lim, 2022. "A Review of the External and Internal Residual Exhaust Gas in the Internal Combustion Engine," Energies, MDPI, vol. 15(3), pages 1-21, February.
    10. Discepoli, G. & Cruccolini, V. & Ricci, F. & Di Giuseppe, A. & Papi, S. & Grimaldi, C.N., 2020. "Experimental characterisation of the thermal energy released by a Radio-Frequency Corona Igniter in nitrogen and air," Applied Energy, Elsevier, vol. 263(C).
    11. Rami Y. Dahham & Haiqiao Wei & Jiaying Pan, 2022. "Improving Thermal Efficiency of Internal Combustion Engines: Recent Progress and Remaining Challenges," Energies, MDPI, vol. 15(17), pages 1-60, August.
    12. Bozza, Fabio & De Bellis, Vincenzo & Teodosio, Luigi, 2016. "Potentials of cooled EGR and water injection for knock resistance and fuel consumption improvements of gasoline engines," Applied Energy, Elsevier, vol. 169(C), pages 112-125.
    13. Tornatore, Cinzia & Bozza, Fabio & De Bellis, Vincenzo & Teodosio, Luigi & Valentino, Gerardo & Marchitto, Luca, 2019. "Experimental and numerical study on the influence of cooled EGR on knock tendency, performance and emissions of a downsized spark-ignition engine," Energy, Elsevier, vol. 172(C), pages 968-976.
    14. Michał Głogowski & Przemysław Kubiak & Szymon Szufa & Piotr Piersa & Łukasz Adrian & Mateusz Krukowski, 2021. "The Use of the Fourier Series to Analyze the Shaping of Thermodynamic Processes in Heat Engines," Energies, MDPI, vol. 14(8), pages 1-23, April.
    15. Xu, Han & Yao, Anren & Yao, Chunde & Gao, Jian, 2017. "Investigation of energy transformation and damage effect under severe knock of engines," Applied Energy, Elsevier, vol. 203(C), pages 506-521.
    16. José Rodríguez-Fernández & Ángel Ramos & Javier Barba & Dolores Cárdenas & Jesús Delgado, 2020. "Improving Fuel Economy and Engine Performance through Gasoline Fuel Octane Rating," Energies, MDPI, vol. 13(13), pages 1-14, July.
    17. De Bellis, Vincenzo & Bontempo, Rodolfo, 2018. "Development and validation of a 1D model for turbocharger compressors under deep-surge operation," Energy, Elsevier, vol. 142(C), pages 507-517.
    18. Wang, Dawei & Shi, Lei & Zhu, Sipeng & Liu, Bo & Qian, Yuehua & Deng, Kangyao, 2020. "Numerical and thermodynamic study on effects of high and low pressure exhaust gas recirculation on turbocharged marine low-speed engine," Applied Energy, Elsevier, vol. 261(C).
    19. Wei, Haiqiao & Feng, Dengquan & Pan, Mingzhang & Pan, JiaYing & Rao, XiaoKang & Gao, Dongzhi, 2016. "Experimental investigation on the knocking combustion characteristics of n-butanol gasoline blends in a DISI engine," Applied Energy, Elsevier, vol. 175(C), pages 346-355.
    20. Vafamehr, Hassan & Cairns, Alasdair & Sampson, Ojon & Koupaie, Mohammadmohsen Moslemin, 2016. "The competing chemical and physical effects of transient fuel enrichment on heavy knock in an optical spark ignition engine," Applied Energy, Elsevier, vol. 179(C), pages 687-697.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:262:y:2020:i:c:s0306261920300313. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.