IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v242y2019icp919-930.html
   My bibliography  Save this article

Plastic/rubber waste-templated carbide slag pellets for regenerable CO2 capture at elevated temperature

Author

Listed:
  • Sun, Jian
  • Sun, Yu
  • Yang, Yuandong
  • Tong, Xianliang
  • Liu, Wenqiang

Abstract

Plastic/rubber waste-templated carbide slag pellets were prepared via an extrusion-spheronization method for high-temperature CO2 capture. Four types of common plastic and rubber wastes (i.e. waste plastic bottle composed of polyethylene terephthalate, disposable plastic cup composed of polypropylene, waste plastic pipe composed of polyvinyl chloride and scrap tire composed of rubber, sulfur and carbon black) were selected as the templating materials. It is found that the addition of waste plastic pipe can cause inferior CO2 capture performance for carbide slag pellets (merely 0.123 g CO2/g sorbent after 25 cycles). It is mainly attributed to the deactivation of carbide slag pellets as a result of the interaction between CaO and the chlorine released from waste plastic pipe. The other chlorine-free plastic and rubber wastes are effective to improve the cyclic CO2 capture performance of carbide slag pellets via altering their porosities. Particularly, the carbide slag pellets doped with 5 wt% of waste plastic bottle exhibit the highest CO2 capture capacity of 0.277 g CO2/g sorbent after 25 cycles, compared to 0.218 g CO2/g sorbent for carbide slag pellets. Moreover, the pre-calcination atmosphere plays an important role on the cyclic CO2 uptake of plastic/rubber waste-templated pellets. The CO2 capture capability of plastic/rubber waste-templated pellets pre-calcined in air is inferior to that pre-calcined in N2. It is mainly due to the heat released from the combustion of plastic or rubber wastes in air accelerates severe sintering for the plastic/rubber waste-templated carbide slag pellets.

Suggested Citation

  • Sun, Jian & Sun, Yu & Yang, Yuandong & Tong, Xianliang & Liu, Wenqiang, 2019. "Plastic/rubber waste-templated carbide slag pellets for regenerable CO2 capture at elevated temperature," Applied Energy, Elsevier, vol. 242(C), pages 919-930.
  • Handle: RePEc:eee:appene:v:242:y:2019:i:c:p:919-930
    DOI: 10.1016/j.apenergy.2019.03.165
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261919305732
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.apenergy.2019.03.165?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Erans, María & Manovic, Vasilije & Anthony, Edward J., 2016. "Calcium looping sorbents for CO2 capture," Applied Energy, Elsevier, vol. 180(C), pages 722-742.
    2. Su, Chenglin & Duan, Lunbo & Donat, Felix & Anthony, Edward John, 2018. "From waste to high value utilization of spent bleaching clay in synthesizing high-performance calcium-based sorbent for CO2 capture," Applied Energy, Elsevier, vol. 210(C), pages 117-126.
    3. Ma, Xiaotong & Li, Yingjie & Duan, Lunbo & Anthony, Edward & Liu, Hantao, 2018. "CO2 capture performance of calcium-based synthetic sorbent with hollow core-shell structure under calcium looping conditions," Applied Energy, Elsevier, vol. 225(C), pages 402-412.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Ying Yang & Yingjie Li & Xianyao Yan & Jianli Zhao & Chunxiao Zhang, 2021. "Development of Thermochemical Heat Storage Based on CaO/CaCO 3 Cycles: A Review," Energies, MDPI, vol. 14(20), pages 1-26, October.
    2. Chaoying Sun & Xianyao Yan & Yingjie Li & Jianli Zhao & Zeyan Wang & Tao Wang, 2020. "Coupled CO2 capture and thermochemical heat storage of CaO derived from calcium acetate," Greenhouse Gases: Science and Technology, Blackwell Publishing, vol. 10(5), pages 1027-1038, October.
    3. Sun, Hao & Li, Yingjie & Yan, Xianyao & Zhao, Jianli & Wang, Zeyan, 2020. "Thermochemical energy storage performance of Al2O3/CeO2 co-doped CaO-based material under high carbonation pressure," Applied Energy, Elsevier, vol. 263(C).
    4. Gong, Xuzhong & Zhang, Tong & Zhang, Junqiang & Wang, Zhi & Liu, Junhao & Cao, Jianwei & Wang, Chuan, 2022. "Recycling and utilization of calcium carbide slag - current status and new opportunities," Renewable and Sustainable Energy Reviews, Elsevier, vol. 159(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Chi, Changyun & Li, Yingjie & Zhang, Wan & Wang, Zeyan, 2019. "Synthesis of a hollow microtubular Ca/Al sorbent with high CO2 uptake by hard templating," Applied Energy, Elsevier, vol. 251(C), pages 1-1.
    2. Xiaotong Ma & Yingjie Li & Yi Qian & Zeyan Wang, 2019. "A Carbide Slag-Based, Ca 12 Al 14 O 33 -Stabilized Sorbent Prepared by the Hydrothermal Template Method Enabling Efficient CO 2 Capture," Energies, MDPI, vol. 12(13), pages 1-17, July.
    3. Ma, Xiaotong & Li, Yingjie & Duan, Lunbo & Anthony, Edward & Liu, Hantao, 2018. "CO2 capture performance of calcium-based synthetic sorbent with hollow core-shell structure under calcium looping conditions," Applied Energy, Elsevier, vol. 225(C), pages 402-412.
    4. Sánchez Jiménez, Pedro E. & Perejón, Antonio & Benítez Guerrero, Mónica & Valverde, José M. & Ortiz, Carlos & Pérez Maqueda, Luis A., 2019. "High-performance and low-cost macroporous calcium oxide based materials for thermochemical energy storage in concentrated solar power plants," Applied Energy, Elsevier, vol. 235(C), pages 543-552.
    5. Hanak, Dawid P. & Jenkins, Barrie G. & Kruger, Tim & Manovic, Vasilije, 2017. "High-efficiency negative-carbon emission power generation from integrated solid-oxide fuel cell and calciner," Applied Energy, Elsevier, vol. 205(C), pages 1189-1201.
    6. Abanades, Stéphane & André, Laurie, 2018. "Design and demonstration of a high temperature solar-heated rotary tube reactor for continuous particles calcination," Applied Energy, Elsevier, vol. 212(C), pages 1310-1320.
    7. Yan, Xianyao & Li, Yingjie & Sun, Chaoying & Zhang, Chunxiao & Yang, Liguo & Fan, Xiaoxu & Chu, Leizhe, 2022. "Enhanced H2 production from steam gasification of biomass by red mud-doped Ca-Al-Ce bi-functional material," Applied Energy, Elsevier, vol. 312(C).
    8. Xu, Lujiang & Chen, Shijia & Song, He & Liu, Yang & Shi, Chenchen & Lu, Qiang, 2020. "Comprehensively utilization of spent bleaching clay for producing high quality bio-fuel via fast pyrolysis process," Energy, Elsevier, vol. 190(C).
    9. Wang, Ke & Zhou, Zhongyun & Zhao, Pengfei & Yin, Zeguang & Su, Zhen & Sun, Ji, 2017. "Molten sodium-fluoride-promoted high-performance Li4SiO4-based CO2 sorbents at low CO2 concentrations," Applied Energy, Elsevier, vol. 204(C), pages 403-412.
    10. Su, Hongcai & Yan, Mi & Wang, Shurong, 2022. "Recent advances in supercritical water gasification of biowaste catalyzed by transition metal-based catalysts for hydrogen production," Renewable and Sustainable Energy Reviews, Elsevier, vol. 154(C).
    11. Chenglin Su & Lunbo Duan & Edward John Anthony, 2018. "CO2 capture and attrition performance of competitive eco‐friendly calcium‐based pellets in fluidized bed," Greenhouse Gases: Science and Technology, Blackwell Publishing, vol. 8(6), pages 1124-1133, December.
    12. Zhang, Wan & Li, Yingjie & He, Zirui & Ma, Xiaotong & Song, Haiping, 2017. "CO2 capture by carbide slag calcined under high-concentration steam and energy requirement in calcium looping conditions," Applied Energy, Elsevier, vol. 206(C), pages 869-878.
    13. Rubens C. Toledo & Gretta L. A. F. Arce & João A. Carvalho & Ivonete Ávila, 2023. "Experimental Development of Calcium Looping Carbon Capture Processes: An Overview of Opportunities and Challenges," Energies, MDPI, vol. 16(9), pages 1-27, April.
    14. Wang, Ke & Zhou, Zhongyun & Zhao, Pengfei & Yin, Zeguang & Su, Zhen & Sun, Ji, 2016. "Synthesis of a highly efficient Li4SiO4 ceramic modified with a gluconic acid-based carbon coating for high-temperature CO2 capture," Applied Energy, Elsevier, vol. 183(C), pages 1418-1427.
    15. Sun, Hao & Li, Yingjie & Yan, Xianyao & Zhao, Jianli & Wang, Zeyan, 2020. "Thermochemical energy storage performance of Al2O3/CeO2 co-doped CaO-based material under high carbonation pressure," Applied Energy, Elsevier, vol. 263(C).
    16. Wang, Heng & Zhao, Hongbin & Du, Huicheng & Zhao, Zefeng & Zhang, Taiheng, 2022. "Thermodynamic performance study of a new diesel-fueled CLHG/SOFC/STIG cogeneration system with CO2 recovery," Energy, Elsevier, vol. 246(C).
    17. Parvez, Ashak Mahmud & Hafner, Selina & Hornberger, Matthias & Schmid, Max & Scheffknecht, Günter, 2021. "Sorption enhanced gasification (SEG) of biomass for tailored syngas production with in-situ CO2 capture: Current status, process scale-up experiences and outlook," Renewable and Sustainable Energy Reviews, Elsevier, vol. 141(C).
    18. Cong, Wen-Jie & Wang, Yi-Tong & Li, Hu & Fang, Zhen & Sun, Jie & Liu, Hai-Tong & Liu, Jie-Teng & Tang, Song & Xu, Lujiang, 2020. "Direct production of biodiesel from waste oils with a strong solid base from alkalized industrial clay ash," Applied Energy, Elsevier, vol. 264(C).
    19. Erans, María & Jeremias, Michal & Zheng, Liya & Yao, Joseph G. & Blamey, John & Manovic, Vasilije & Fennell, Paul S. & Anthony, Edward J., 2018. "Pilot testing of enhanced sorbents for calcium looping with cement production," Applied Energy, Elsevier, vol. 225(C), pages 392-401.
    20. Bahnamiri, Fazele Karimian & Khalili, Masoud & Pakzad, Pouria & Mehrpooya, Mehdi, 2022. "Techno-economic assessment of a novel power-to-liquid system for synthesis of formic acid and ammonia, based on CO2 electroreduction and alkaline water electrolysis cells," Renewable Energy, Elsevier, vol. 187(C), pages 1224-1240.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:242:y:2019:i:c:p:919-930. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.