IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v144y2015icp204-213.html
   My bibliography  Save this article

Numerical investigation of the effect of distributed heat sources on heat-to-sound conversion in a T-shaped thermoacoustic system

Author

Listed:
  • Zhao, Dan
  • Li, Shihuai
  • Yang, Wenming
  • Zhang, Zhiguo

Abstract

The present work considers a T-shaped standing-wave thermoacoustic system with an electrical heater confined in the bottom stem and two temperature-controllable heaters (TCHs) enclosed in the bifurcating branches. With the heater placed at the bottom stem set to 1100K and TCHs be adiabatic, self-sustained limit cycle oscillations are generated. To gain insights on the effect of TCHs on damping or amplifying the oscillations, thermodynamic analysis and 2D numerical investigations are conducted. Three parameters are examined: (1) the number N of TCHs, (2) the surface temperature Tl,r of TCHs and (3) the TCHs location xl,r/L. As each of the parameters is varied, the heat-driven acoustic signature is found to change. Flow reversal is observed during part of the limit cycle oscillations. The main nonlinearity is identified in the heat fluxes. In addition, such limit cycle oscillations are found to be mitigated or amplified, depending strongly on the heat flux and the locations of the TCHs. Placing the TCHs at proper locations in the bifurcating branches can lead to a maximum ‘destructive’ interaction and reducing the sound pressure level by more than 60dB. To gain insight on the damping effect of the TCHs, Rayleigh index as a critical indicator of the coupling between heat and sound is defined and characterized. The present work opens up new applicable way to minimize standing-wave oscillations in a practical engine system by simply implementing additional heat sources.

Suggested Citation

  • Zhao, Dan & Li, Shihuai & Yang, Wenming & Zhang, Zhiguo, 2015. "Numerical investigation of the effect of distributed heat sources on heat-to-sound conversion in a T-shaped thermoacoustic system," Applied Energy, Elsevier, vol. 144(C), pages 204-213.
    • Handle: RePEc:eee:appene:v:144:y:2015:i:c:p:204-213
    DOI: 10.1016/j.apenergy.2015.01.091
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261915001270
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2015.01.091?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Yu, Zhibin & Jaworski, Artur J. & Backhaus, Scott, 2012. "Travelling-wave thermoacoustic electricity generator using an ultra-compliant alternator for utilization of low-grade thermal energy," Applied Energy, Elsevier, vol. 99(C), pages 135-145.
    2. Fichera, A. & Pagano, A., 2009. "Monitoring combustion unstable dynamics by means of control charts," Applied Energy, Elsevier, vol. 86(9), pages 1574-1581, September.
    3. Yu, Guoyao & Wang, Xiaotao & Dai, Wei & Luo, Ercang, 2013. "Study on energy conversion characteristics of a high frequency standing-wave thermoacoustic heat engine," Applied Energy, Elsevier, vol. 111(C), pages 1147-1151.
    4. Cammarata, L. & Fichera, A. & Pagano, A., 2002. "Neural prediction of combustion instability," Applied Energy, Elsevier, vol. 72(2), pages 513-528, June.
    5. Fichera, A. & Losenno, C. & Pagano, A., 2001. "Experimental analysis of thermo-acoustic combustion instability," Applied Energy, Elsevier, vol. 70(2), pages 179-191, October.
    6. Singh, A.V. & Yu, M. & Gupta, A.K. & Bryden, K.M., 2013. "Thermo-acoustic behavior of a swirl stabilized diffusion flame with heterogeneous sensors," Applied Energy, Elsevier, vol. 106(C), pages 1-16.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Li, Xinyan & Zhao, Dan & Yang, Xinglin & Wen, Huabing & Jin, Xiao & Li, Shen & Zhao, He & Xie, Changqing & Liu, Haili, 2016. "Transient growth of acoustical energy associated with mitigating thermoacoustic oscillations," Applied Energy, Elsevier, vol. 169(C), pages 481-490.
    2. Wu, Gang & Jin, Xiao & Li, Qiangtian & Zhao, He & Ahmed, I.R. & Fu, Jianqin, 2016. "Experimental and numerical definition of the extreme heater locations in a closed-open standing wave thermoacoustic system," Applied Energy, Elsevier, vol. 182(C), pages 320-330.
    3. Li, Shen & Li, Qiangtian & Tang, Lin & Yang, Bin & Fu, Jianqin & Clarke, C.A. & Jin, Xiao & Ji, C.Z. & Zhao, He, 2016. "Theoretical and experimental demonstration of minimizing self-excited thermoacoustic oscillations by applying anti-sound technique," Applied Energy, Elsevier, vol. 181(C), pages 399-407.
    4. Zhao, Dan & Li, Shen & Zhao, He, 2016. "Entropy-involved energy measure study of intrinsic thermoacoustic oscillations," Applied Energy, Elsevier, vol. 177(C), pages 570-578.
    5. Zhang, Zhiguo & Zhao, Dan & Dobriyal, R. & Zheng, Youqu & Yang, Wenming, 2015. "Theoretical and experimental investigation of thermoacoustics transfer function," Applied Energy, Elsevier, vol. 154(C), pages 131-142.
    6. Wu, Gang & Lu, Zhengli & Pan, Weichen & Guan, Yiheng & Ji, C.Z., 2018. "Numerical and experimental demonstration of actively passive mitigating self-sustained thermoacoustic oscillations," Applied Energy, Elsevier, vol. 222(C), pages 257-266.
    7. Zhao, Dan & Li, Lei, 2015. "Effect of choked outlet on transient energy growth analysis of a thermoacoustic system," Applied Energy, Elsevier, vol. 160(C), pages 502-510.
    8. Li, Xinyan & Huang, Yong & Zhao, Dan & Yang, Wenming & Yang, Xinglin & Wen, Huabing, 2017. "Stability study of a nonlinear thermoacoustic combustor: Effects of time delay, acoustic loss and combustion-flow interaction index," Applied Energy, Elsevier, vol. 199(C), pages 217-224.
    9. Zhang, Zhiguo & Zhao, Dan & Li, S.H. & Ji, C.Z. & Li, X.Y. & Li, J.W., 2015. "Transient energy growth of acoustic disturbances in triggering self-sustained thermoacoustic oscillations," Energy, Elsevier, vol. 82(C), pages 370-381.
    10. Wu, Gang & Lu, Zhengli & Pan, Weichen & Guan, Yiheng & Li, Shihuai & Ji, C.Z., 2019. "Experimental demonstration of mitigating self-excited combustion oscillations using an electrical heater," Applied Energy, Elsevier, vol. 239(C), pages 331-342.
    11. Sun, Yuze & Rao, Zhuming & Zhao, Dan & Wang, Bing & Sun, Dakun & Sun, Xiaofeng, 2020. "Characterizing nonlinear dynamic features of self-sustained thermoacoustic oscillations in a premixed swirling combustor," Applied Energy, Elsevier, vol. 264(C).
    12. Fichera, A. & Pagano, A., 2006. "Application of neural dynamic optimization to combustion-instability control," Applied Energy, Elsevier, vol. 83(3), pages 253-264, March.
    13. Fichera, A. & Pagano, A., 2009. "Monitoring combustion unstable dynamics by means of control charts," Applied Energy, Elsevier, vol. 86(9), pages 1574-1581, September.
    14. Han, Zhezhe & Hossain, Md. Moinul & Wang, Yuwei & Li, Jian & Xu, Chuanlong, 2020. "Combustion stability monitoring through flame imaging and stacked sparse autoencoder based deep neural network," Applied Energy, Elsevier, vol. 259(C).
    15. Sun, Yuze & Zhao, Dan & Ni, Siliang & David, Tim & Zhang, Yang, 2020. "Entropy and flame transfer function analysis of a hydrogen-fueled diffusion flame in a longitudinal combustor," Energy, Elsevier, vol. 194(C).
    16. Jin, Tao & Huang, Jiale & Feng, Ye & Yang, Rui & Tang, Ke & Radebaugh, Ray, 2015. "Thermoacoustic prime movers and refrigerators: Thermally powered engines without moving components," Energy, Elsevier, vol. 93(P1), pages 828-853.
    17. Xu, Jian & Chung, Kwok-Wai, 2009. "Dynamics for a class of nonlinear systems with time delay," Chaos, Solitons & Fractals, Elsevier, vol. 40(1), pages 28-49.
    18. Kisha, Wigdan & Riley, Paul & McKechnie, Jon & Hann, David, 2021. "Asymmetrically heated multi-stage travelling-wave thermoacoustic electricity generator," Energy, Elsevier, vol. 235(C).
    19. Bi, Tianjiao & Wu, Zhanghua & Zhang, Limin & Yu, Guoyao & Luo, Ercang & Dai, Wei, 2017. "Development of a 5kW traveling-wave thermoacoustic electric generator," Applied Energy, Elsevier, vol. 185(P2), pages 1355-1361.
    20. Elhawary, M.A. & Ibrahim, Abdelmaged H. & Sabry, Ashraf S. & Abdel-Rahman, Ehab, 2020. "Experimental study of a small scale bi-directional axial impulse turbine for acoustic-to-mechanical power conversion," Renewable Energy, Elsevier, vol. 159(C), pages 414-426.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:144:y:2015:i:c:p:204-213. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.