IDEAS home Printed from https://ideas.repec.org/a/spr/opsear/v58y2021i3d10.1007_s12597-020-00499-w.html
   My bibliography  Save this article

Inter-dependent lead-time and ordering cost reduction strategy: a supply chain model with quality control, lead-time dependent backorder and price-sensitive stochastic demand

Author

Listed:
  • Monami Das Roy

    (Vidyasagar University)

  • Shib Sankar Sana

    (Kishore Bharati Bhagini Nivedita College)

Abstract

This research work addresses an inter-dependent reduction strategy of lead time and ordering cost in a two-stage single vendor and single buyer supply chain model with price-sensitive stochastic demand. Buyer’s backorder rate is a variable, as it depends on the variable lead time. Quality improvement is another aspect of this study. The objective of this study is three folds. Firstly, reducing the lead time and ordering cost simultaneously. Secondly, improving the quality of products and third, optimizing order lot size, lead time, process quality parameter, safety factor, ordering cost, lead time crashing cost, backorder rate, and the number of deliveries so that the joint expected total profit becomes maximum. Stackelberg game and Joint decision, both approaches are discussed. Numerical result shows that the Joint decision approach gives better result than the Stackelberg game approach. Sensitivity analysis for Case-III with respect to some key parameters has been carried out.

Suggested Citation

  • Monami Das Roy & Shib Sankar Sana, 2021. "Inter-dependent lead-time and ordering cost reduction strategy: a supply chain model with quality control, lead-time dependent backorder and price-sensitive stochastic demand," OPSEARCH, Springer;Operational Research Society of India, vol. 58(3), pages 690-710, September.
    • Handle: RePEc:spr:opsear:v:58:y:2021:i:3:d:10.1007_s12597-020-00499-w
    DOI: 10.1007/s12597-020-00499-w
    as

    Download full text from publisher

    File URL: http://link.springer.com/10.1007/s12597-020-00499-w
    File Function: Abstract
    Download Restriction: Access to the full text of the articles in this series is restricted.
    File URL: https://libkey.io/10.1007/s12597-020-00499-w?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Sung Jun Kim & Biswajit Sarkar, 2017. "Supply Chain Model with Stochastic Lead Time, Trade-Credit Financing, and Transportation Discounts," Mathematical Problems in Engineering, Hindawi, vol. 2017, pages 1-14, May.
    2. Chang, Hung-Chi & Ouyang, Liang-Yuh & Wu, Kun-Shan & Ho, Chia-Huei, 2006. "Integrated vendor-buyer cooperative inventory models with controllable lead time and ordering cost reduction," European Journal of Operational Research, Elsevier, vol. 170(2), pages 481-495, April.
    3. Zhang, Tinglong & Liang, Liang & Yu, Yugang & Yu, Yan, 2007. "An integrated vendor-managed inventory model for a two-echelon system with order cost reduction," International Journal of Production Economics, Elsevier, vol. 109(1-2), pages 241-253, September.
    4. Shib Sana & Suresh Goyal, 2015. "$$(Q,r,L)$$ ( Q , r , L ) model for stochastic demand with lead-time dependent partial backlogging," Annals of Operations Research, Springer, vol. 233(1), pages 401-410, October.
    5. Yoo, Seung Ho & Kim, DaeSoo & Park, Myung-Sub, 2012. "Lot sizing and quality investment with quality cost analyses for imperfect production and inspection processes with commercial return," International Journal of Production Economics, Elsevier, vol. 140(2), pages 922-933.
    6. Monami Das Roy & Shib Sankar Sana, 2017. "Random sales price-sensitive stochastic demand," Journal of Advances in Management Research, Emerald Group Publishing Limited, vol. 14(4), pages 408-424, October.
    7. Woo, York Y. & Hsu, Shu-Lu & Wu, Soushan, 2001. "An integrated inventory model for a single vendor and multiple buyers with ordering cost reduction," International Journal of Production Economics, Elsevier, vol. 73(3), pages 203-215, October.
    8. Evan L. Porteus, 1986. "Optimal Lot Sizing, Process Quality Improvement and Setup Cost Reduction," Operations Research, INFORMS, vol. 34(1), pages 137-144, February.
    9. Monami Roy & Shib Sana & Kripasindhu Chaudhuri, 2011. "An economic order quantity model of imperfect quality items with partial backlogging," International Journal of Systems Science, Taylor & Francis Journals, vol. 42(8), pages 1409-1419.
    10. S. Jørgensen & G. Zaccour, 1999. "Equilibrium Pricing and Advertising Strategies in a Marketing Channel," Journal of Optimization Theory and Applications, Springer, vol. 102(1), pages 111-125, July.
    11. B R Sarker & R Rochanaluk & P J Egbelu, 2014. "Improving service rate for a tree-type three-echelon supply chain system with backorders at retailer's level," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 65(1), pages 57-72, January.
    12. Jinn-Tsair Teng & Leopoldo Cárdenas-Barrón & Kuo-Ren Lou & Hui Wee, 2013. "Optimal economic order quantity for buyer–distributor–vendor supply chain with backlogging derived without derivatives," International Journal of Systems Science, Taylor & Francis Journals, vol. 44(5), pages 986-994.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Priyamvada & Prerna Gautam & Aditi Khanna, 2021. "Sustainable production strategies for deteriorating and imperfect quality items with an investment in preservation technology," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 12(5), pages 910-918, October.
    2. Hongfang Qiao & Xiaowei Lin & Xideng Zhou & Minglin Jiang, 2022. "Research on Joint Decision-Making of Timely Delivery, Product Quality and Marketing in Supply Chain Based on Differential Game," Sustainability, MDPI, vol. 14(17), pages 1-20, August.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Taleizadeh, Ata Allah & Shokr, Iman & Konstantaras, Ioannis & VafaeiNejad, Mahyar, 2020. "Stock replenishment policies for a vendor-managed inventory in a retailing system," Journal of Retailing and Consumer Services, Elsevier, vol. 55(C).
    2. S. Hemapriya & R. Uthayakumar, 2017. "An inventory model with uncertain demand and lost sales reduction under service level constraint," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 8(2), pages 1399-1418, November.
    3. M. Vijayashree & R. Uthayakumar, 2016. "Two-echelon supply chain inventory model with controllable lead time," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 7(1), pages 112-125, December.
    4. Huang, Chao-Kuei & Tsai, Deng-Maw & Wu, Ji-Cheng & Chung, Kun-Jen, 2010. "An optimal integrated vendor-buyer inventory policy under conditions of order-processing time reduction and permissible delay in payments," International Journal of Production Economics, Elsevier, vol. 128(1), pages 445-451, November.
    5. Rad, Reza Hosseini & Razmi, Jafar & Sangari, Mohamad Sadegh & Ebrahimi, Zahra Fallah, 2014. "Optimizing an integrated vendor-managed inventory system for a single-vendor two-buyer supply chain with determining weighting factor for vendor׳s ordering cost," International Journal of Production Economics, Elsevier, vol. 153(C), pages 295-308.
    6. K. F. Mary Latha & M. Ganesh Kumar & R. Uthayakumar, 2021. "Two echelon economic lot sizing problems with geometric shipment policy backorder price discount and optimal investment to reduce ordering cost," OPSEARCH, Springer;Operational Research Society of India, vol. 58(4), pages 1133-1163, December.
    7. Glock, Christoph H., 2012. "The joint economic lot size problem: A review," International Journal of Production Economics, Elsevier, vol. 135(2), pages 671-686.
    8. Yu, Yugang & Huang, George Q., 2010. "Nash game model for optimizing market strategies, configuration of platform products in a Vendor Managed Inventory (VMI) supply chain for a product family," European Journal of Operational Research, Elsevier, vol. 206(2), pages 361-373, October.
    9. Zhang, Tinglong & Liang, Liang & Yu, Yugang & Yu, Yan, 2007. "An integrated vendor-managed inventory model for a two-echelon system with order cost reduction," International Journal of Production Economics, Elsevier, vol. 109(1-2), pages 241-253, September.
    10. Bimal Kumar Sett & Bikash Koli Dey & Biswajit Sarkar, 2020. "Autonomated Inspection Policy for Smart Factory—An Improved Approach," Mathematics, MDPI, vol. 8(10), pages 1-19, October.
    11. Sarkar, Biswajit & Saren, Sharmila, 2016. "Product inspection policy for an imperfect production system with inspection errors and warranty cost," European Journal of Operational Research, Elsevier, vol. 248(1), pages 263-271.
    12. Yu, Yugang & Chu, Feng & Chen, Haoxun, 2009. "A Stackelberg game and its improvement in a VMI system with a manufacturing vendor," European Journal of Operational Research, Elsevier, vol. 192(3), pages 929-948, February.
    13. S. Sarkar & B. C. Giri, 2020. "A vendor–buyer integrated inventory system with variable lead time and uncertain market demand," Operational Research, Springer, vol. 20(1), pages 491-515, March.
    14. Li, Xiang, 2020. "Reducing channel costs by investing in smart supply chain technologies," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 137(C).
    15. Dhahri, Akrem & Gharbi, Ali & Ouhimmou, Mustapha, 2022. "Integrated production-delivery control policy for an unreliable manufacturing system and multiple retailers," International Journal of Production Economics, Elsevier, vol. 245(C).
    16. Gerardo Treviño-Garza & Krystel K. Castillo-Villar & Leopoldo Eduardo Cárdenas-Barrón, 2015. "Joint determination of the lot size and number of shipments for a family of integrated vendor–buyer systems considering defective products," International Journal of Systems Science, Taylor & Francis Journals, vol. 46(9), pages 1705-1716, July.
    17. Taleizadeh, Ata Allah & Khanbaglo, Mahboobeh Perak Sari & Cárdenas-Barrón, Leopoldo Eduardo, 2016. "An EOQ inventory model with partial backordering and reparation of imperfect products," International Journal of Production Economics, Elsevier, vol. 182(C), pages 418-434.
    18. Sraboni Mandal & Danish Ali Khan, 2015. "Integrated inventory model with uniform demand for one vendor one customer," International Journal of Business Performance and Supply Chain Modelling, Inderscience Enterprises Ltd, vol. 7(1), pages 36-52.
    19. Almehdawe, Eman & Mantin, Benny, 2010. "Vendor managed inventory with a capacitated manufacturer and multiple retailers: Retailer versus manufacturer leadership," International Journal of Production Economics, Elsevier, vol. 128(1), pages 292-302, November.
    20. Sarkar, Biswajit & Moon, Ilkyeong, 2014. "Improved quality, setup cost reduction, and variable backorder costs in an imperfect production process," International Journal of Production Economics, Elsevier, vol. 155(C), pages 204-213.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:spr:opsear:v:58:y:2021:i:3:d:10.1007_s12597-020-00499-w. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Sonal Shukla or Springer Nature Abstracting and Indexing (email available below). General contact details of provider: http://www.springer.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.