IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v16y2023i2p865-d1032984.html
   My bibliography  Save this article

On the Integration of CO 2 Capture Technologies for an Oil Refinery

Author

Listed:
  • Vadim Fetisov

    (Department of Petroleum Engineering, Saint Petersburg Mining University, 2, 21st Line, 199106 Saint Petersburg, Russia)

  • Adam M. Gonopolsky

    (Department of Industrial Ecology, Gubkin Russian State University of Oil and Gas, 119296 Moscow, Russia)

  • Maria Yu. Zemenkova

    (Department of Transportation of Hydrocarbon Resources, Industrial University of Tyumen, 625000 Tyumen, Russia)

  • Schipachev Andrey

    (Department of Petroleum Engineering, Saint Petersburg Mining University, 2, 21st Line, 199106 Saint Petersburg, Russia)

  • Hadi Davardoost

    (Department of System Analysis and Management, Saint Petersburg Mining University, 2, 21st Line, 199106 Saint Petersburg, Russia)

  • Amir H. Mohammadi

    (Discipline of Chemical Engineering, School of Engineering, University of KwaZulu-Natal, Howard College Campus, King George V Avenue, Durban 4041, South Africa)

  • Masoud Riazi

    (EOR Research Center, Shiraz University, Shiraz 71345, Iran)

Abstract

This study determines and presents the capital and operating costs imposed by the use of CO 2 capture technologies in the refining and petrochemical sectors. Depending on the refining process and the CO 2 capture method, CO 2 emissions costs of EUR 30 to 40 per ton of CO 2 can be avoided. Advanced low-temperature CO 2 capture technologies for upgrading oxyfuel reformers may not provide any significant long-term and short-term benefits compared to conventional technologies. For this reason, an analysis was performed to estimate the CO 2 reduction potential for the oil and gas industries using short- and long-term ST/MT technologies, was arriving at a reduction potential of about 0.5–1 Gt/yr. The low cost of CO 2 reduction is a result of the good integration of CO 2 capture into the oil production process. The results show that advanced gasoline fraction recovery with integrated CO 2 capture can reduce the cost of producing petroleum products and reduce CO 2 emissions, while partial CO 2 capture has comparative advantages in some cases.

Suggested Citation

  • Vadim Fetisov & Adam M. Gonopolsky & Maria Yu. Zemenkova & Schipachev Andrey & Hadi Davardoost & Amir H. Mohammadi & Masoud Riazi, 2023. "On the Integration of CO 2 Capture Technologies for an Oil Refinery," Energies, MDPI, vol. 16(2), pages 1-19, January.
    • Handle: RePEc:gam:jeners:v:16:y:2023:i:2:p:865-:d:1032984
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/16/2/865/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/16/2/865/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Hanak, Dawid P. & Biliyok, Chechet & Manovic, Vasilije, 2015. "Efficiency improvements for the coal-fired power plant retrofit with CO2 capture plant using chilled ammonia process," Applied Energy, Elsevier, vol. 151(C), pages 258-272.
    2. Cameron Hepburn & Ella Adlen & John Beddington & Emily A. Carter & Sabine Fuss & Niall Mac Dowell & Jan C. Minx & Pete Smith & Charlotte K. Williams, 2019. "The technological and economic prospects for CO2 utilization and removal," Nature, Nature, vol. 575(7781), pages 87-97, November.
    3. Li, Hailong & Ditaranto, Mario & Berstad, David, 2011. "Technologies for increasing CO2 concentration in exhaust gas from natural gas-fired power production with post-combustion, amine-based CO2 capture," Energy, Elsevier, vol. 36(2), pages 1124-1133.
    4. Flavien M. Brethomé & Neil J. Williams & Charles A. Seipp & Michelle K. Kidder & Radu Custelcean, 2018. "Direct air capture of CO2 via aqueous-phase absorption and crystalline-phase release using concentrated solar power," Nature Energy, Nature, vol. 3(7), pages 553-559, July.
    5. Neelis, M.L. & Patel, M. & Gielen, D.J. & Blok, K., 2005. "Modelling CO2 emissions from non-energy use with the non-energy use emission accounting tables (NEAT) model," Resources, Conservation & Recycling, Elsevier, vol. 45(3), pages 226-250.
    6. Zhao, Ruikai & Zhao, Li & Deng, Shuai & Song, Chunfeng & He, Junnan & Shao, Yawei & Li, Shuangjun, 2017. "A comparative study on CO2 capture performance of vacuum-pressure swing adsorption and pressure-temperature swing adsorption based on carbon pump cycle," Energy, Elsevier, vol. 137(C), pages 495-509.
    7. Pavel Tcvetkov & Alexey Cherepovitsyn & Sergey Fedoseev, 2019. "The Changing Role of CO 2 in the Transition to a Circular Economy: Review of Carbon Sequestration Projects," Sustainability, MDPI, vol. 11(20), pages 1-19, October.
    8. Alexey Cherepovitsyn & Tatiana Chvileva & Sergey Fedoseev, 2020. "Popularization of Carbon Capture and Storage Technology in Society: Principles and Methods," IJERPH, MDPI, vol. 17(22), pages 1-24, November.
    9. Mohammad Samari & Firas Ridha & Vasilije Manovic & Arturo Macchi & E. J. Anthony, 2020. "Direct capture of carbon dioxide from air via lime-based sorbents," Mitigation and Adaptation Strategies for Global Change, Springer, vol. 25(1), pages 25-41, January.
    10. Katja Kuparinen & Esa Vakkilainen & Tero Tynjälä, 2019. "Biomass-based carbon capture and utilization in kraft pulp mills," Mitigation and Adaptation Strategies for Global Change, Springer, vol. 24(7), pages 1213-1230, October.
    11. Jiang, L. & Gonzalez-Diaz, A. & Ling-Chin, J. & Roskilly, A.P. & Smallbone, A.J., 2019. "Post-combustion CO2 capture from a natural gas combined cycle power plant using activated carbon adsorption," Applied Energy, Elsevier, vol. 245(C), pages 1-15.
    12. Hedin, Niklas & Andersson, Linnéa & Bergström, Lennart & Yan, Jinyue, 2013. "Adsorbents for the post-combustion capture of CO2 using rapid temperature swing or vacuum swing adsorption," Applied Energy, Elsevier, vol. 104(C), pages 418-433.
    13. Pan, Ming & Aziz, Farah & Li, Baohong & Perry, Simon & Zhang, Nan & Bulatov, Igor & Smith, Robin, 2016. "Application of optimal design methodologies in retrofitting natural gas combined cycle power plants with CO2 capture," Applied Energy, Elsevier, vol. 161(C), pages 695-706.
    14. Raganati, F. & Ammendola, P. & Chirone, R., 2014. "CO2 adsorption on fine activated carbon in a sound assisted fluidized bed: Effect of sound intensity and frequency, CO2 partial pressure and fluidization velocity," Applied Energy, Elsevier, vol. 113(C), pages 1269-1282.
    15. Natalia Romasheva & Alina Ilinova, 2019. "CCS Projects: How Regulatory Framework Influences Their Deployment," Resources, MDPI, vol. 8(4), pages 1-19, December.
    16. Hanak, Dawid P. & Jenkins, Barrie G. & Kruger, Tim & Manovic, Vasilije, 2017. "High-efficiency negative-carbon emission power generation from integrated solid-oxide fuel cell and calciner," Applied Energy, Elsevier, vol. 205(C), pages 1189-1201.
    17. Ben-Mansour, R. & Habib, M.A. & Bamidele, O.E. & Basha, M. & Qasem, N.A.A. & Peedikakkal, A. & Laoui, T. & Ali, M., 2016. "Carbon capture by physical adsorption: Materials, experimental investigations and numerical modeling and simulations – A review," Applied Energy, Elsevier, vol. 161(C), pages 225-255.
    18. Santori, Giulio & Charalambous, Charithea & Ferrari, Maria-Chiara & Brandani, Stefano, 2018. "Adsorption artificial tree for atmospheric carbon dioxide capture, purification and compression," Energy, Elsevier, vol. 162(C), pages 1158-1168.
    19. Adams, T. & Mac Dowell, N., 2016. "Off-design point modelling of a 420MW CCGT power plant integrated with an amine-based post-combustion CO2 capture and compression process," Applied Energy, Elsevier, vol. 178(C), pages 681-702.
    20. Radel Sultanbekov & Ilia Beloglazov & Shamil Islamov & Muk Chen Ong, 2021. "Exploring of the Incompatibility of Marine Residual Fuel: A Case Study Using Machine Learning Methods," Energies, MDPI, vol. 14(24), pages 1-16, December.
    21. Li, Hailong & Ditaranto, Mario & Yan, Jinyue, 2012. "Carbon capture with low energy penalty: Supplementary fired natural gas combined cycles," Applied Energy, Elsevier, vol. 97(C), pages 164-169.
    22. Cabral, Renato P. & Mac Dowell, Niall, 2017. "A novel methodological approach for achieving £/MWh cost reduction of CO2 capture and storage (CCS) processes," Applied Energy, Elsevier, vol. 205(C), pages 529-539.
    23. Niall Mac Dowell & Paul S. Fennell & Nilay Shah & Geoffrey C. Maitland, 2017. "The role of CO2 capture and utilization in mitigating climate change," Nature Climate Change, Nature, vol. 7(4), pages 243-249, April.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Jiang, L. & Gonzalez-Diaz, A. & Ling-Chin, J. & Roskilly, A.P. & Smallbone, A.J., 2019. "Post-combustion CO2 capture from a natural gas combined cycle power plant using activated carbon adsorption," Applied Energy, Elsevier, vol. 245(C), pages 1-15.
    2. Li, Shuangjun & Yuan, Xiangzhou & Deng, Shuai & Zhao, Li & Lee, Ki Bong, 2021. "A review on biomass-derived CO2 adsorption capture: Adsorbent, adsorber, adsorption, and advice," Renewable and Sustainable Energy Reviews, Elsevier, vol. 152(C).
    3. Maria Elena Diego & Muhammad Akram & Jean‐Michel Bellas & Karen N. Finney & Mohamed Pourkashanian, 2017. "Making gas‐CCS a commercial reality: The challenges of scaling up," Greenhouse Gases: Science and Technology, Blackwell Publishing, vol. 7(5), pages 778-801, October.
    4. Wu, Xiao & Xi, Han & Ren, Yuning & Lee, Kwang Y., 2021. "Power-carbon coordinated control of BFG-fired CCGT power plant integrated with solvent-based post-combustion CO2 capture," Energy, Elsevier, vol. 226(C).
    5. Wahiba Yaïci & Evgueniy Entchev & Michela Longo, 2022. "Recent Advances in Small-Scale Carbon Capture Systems for Micro-Combined Heat and Power Applications," Energies, MDPI, vol. 15(8), pages 1-30, April.
    6. Diego, Maria Elena & Bellas, Jean-Michel & Pourkashanian, Mohamed, 2018. "Techno-economic analysis of a hybrid CO2 capture system for natural gas combined cycles with selective exhaust gas recirculation," Applied Energy, Elsevier, vol. 215(C), pages 778-791.
    7. A. G. Olabi & Tabbi Wilberforce & Enas Taha Sayed & Nabila Shehata & Abdul Hai Alami & Hussein M. Maghrabie & Mohammad Ali Abdelkareem, 2022. "Prospect of Post-Combustion Carbon Capture Technology and Its Impact on the Circular Economy," Energies, MDPI, vol. 15(22), pages 1-38, November.
    8. Chen, S.J. & Zhu, M. & Fu, Y. & Huang, Y.X. & Tao, Z.C. & Li, W.L., 2017. "Using 13X, LiX, and LiPdAgX zeolites for CO2 capture from post-combustion flue gas," Applied Energy, Elsevier, vol. 191(C), pages 87-98.
    9. Akinola, Toluleke E. & Bonilla Prado, Phebe L. & Wang, Meihong, 2022. "Experimental studies, molecular simulation and process modelling\simulation of adsorption-based post-combustion carbon capture for power plants: A state-of-the-art review," Applied Energy, Elsevier, vol. 317(C).
    10. Chu, Fengming & Yang, Lijun & Du, Xiaoze & Yang, Yongping, 2017. "Mass transfer and energy consumption for CO2 absorption by ammonia solution in bubble column," Applied Energy, Elsevier, vol. 190(C), pages 1068-1080.
    11. Andrew William Ruttinger & Miyuru Kannangara & Jalil Shadbahr & Phil De Luna & Farid Bensebaa, 2021. "How CO 2 -to-Diesel Technology Could Help Reach Net-Zero Emissions Targets: A Canadian Case Study," Energies, MDPI, vol. 14(21), pages 1-21, October.
    12. Wang, Weilong & Li, Jiang & Wei, Xiaolan & Ding, Jing & Feng, Haijun & Yan, Jinyue & Yang, Jianping, 2015. "Carbon dioxide adsorption thermodynamics and mechanisms on MCM-41 supported polyethylenimine prepared by wet impregnation method," Applied Energy, Elsevier, vol. 142(C), pages 221-228.
    13. Alexander García-Mariaca & Eva Llera-Sastresa, 2021. "Review on Carbon Capture in ICE Driven Transport," Energies, MDPI, vol. 14(21), pages 1-30, October.
    14. Simon P. Philbin, 2020. "Critical Analysis and Evaluation of the Technology Pathways for Carbon Capture and Utilization," Clean Technol., MDPI, vol. 2(4), pages 1-21, December.
    15. Oh, Se-Young & Kim, Jin-Kuk, 2018. "Operational optimization for part-load performance of amine-based post-combustion CO2 capture processes," Energy, Elsevier, vol. 146(C), pages 57-66.
    16. Ryu, Kyung Hwan & Kim, Boeun & Heo, Seongmin, 2022. "Sustainability analysis framework based on global market dynamics: A carbon capture and utilization industry case," Renewable and Sustainable Energy Reviews, Elsevier, vol. 166(C).
    17. Kong, Yong & Shen, Xiaodong & Cui, Sheng & Fan, Maohong, 2015. "Development of monolithic adsorbent via polymeric sol–gel process for low-concentration CO2 capture," Applied Energy, Elsevier, vol. 147(C), pages 308-317.
    18. Jing Bian & Liqiang Duan & Yongping Yang, 2023. "Simulation and Economic Investigation of CO 2 Separation from Gas Turbine Exhaust Gas by Molten Carbonate Fuel Cell with Exhaust Gas Recirculation and Selective Exhaust Gas Recirculation," Energies, MDPI, vol. 16(8), pages 1-21, April.
    19. Xiang, Yanlei & Cai, Lei & Guan, Yanwen & Liu, Wenbin & Han, Yixiao & Liang, Ying, 2018. "Study on the configuration of bottom cycle in natural gas combined cycle power plants integrated with oxy-fuel combustion," Applied Energy, Elsevier, vol. 212(C), pages 465-477.
    20. Li, Shuangjun & Deng, Shuai & Zhao, Li & Yuan, Xiangzhou & Yun, Heesun, 2020. "How to express the adsorbed CO2 with the Gibbs’ thermodynamic graphical method: A preliminary study," Energy, Elsevier, vol. 193(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:16:y:2023:i:2:p:865-:d:1032984. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.