IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v15y2022i24p9527-d1004742.html
   My bibliography  Save this article

State of the Art in Humidified Gas Turbine Configurations

Author

Listed:
  • Anwar Hamdan Al Assaf

    (Department of Aviation Sciences, Amman Arab University, Amman 11953, Jordan)

  • Abdulkarem Amhamed

    (Qatar Environment and Energy Research Institute (QEERI), Hamad Bin Khalifa University, Doha 34110, Qatar)

  • Odi Fawwaz Alrebei

    (Qatar Environment and Energy Research Institute (QEERI), Hamad Bin Khalifa University, Doha 34110, Qatar)

Abstract

This research investigates the most modern approaches to water treatment and recovery in power plants because of the scarcity of water sources and the significance of those sources in enhancing the performance of power-generating cycles. Gas turbines, which use mixes of air and water as the working fluid, provide superior efficiency, high specific power outputs, and reduced investment costs compared to combined cycles. Several different cycles for humidified gas turbines, including cycles of direct water injection, cycles of steam injection, and evaporative cycles that include humidity control towers, have been proposed. Despite this, only a few of these cycles have been put into practice, and even fewer are available for purchase on the market. This work aims to analyze the research and development literature on humidification-based gas turbines and highlight the cycles that have the most significant promise for the long run. In addition, work on development that still has to be carried out in order to deploy humidification-based gas turbine cycles is advised. This article may also be used as an overview of the research and development work that has taken place on humidification-based gas turbines over the course of the last thirty years.

Suggested Citation

  • Anwar Hamdan Al Assaf & Abdulkarem Amhamed & Odi Fawwaz Alrebei, 2022. "State of the Art in Humidified Gas Turbine Configurations," Energies, MDPI, vol. 15(24), pages 1-32, December.
    • Handle: RePEc:gam:jeners:v:15:y:2022:i:24:p:9527-:d:1004742
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/15/24/9527/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/15/24/9527/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. De Paepe, Ward & Delattin, Frank & Bram, Svend & De Ruyck, Jacques, 2012. "Steam injection experiments in a microturbine – A thermodynamic performance analysis," Applied Energy, Elsevier, vol. 97(C), pages 569-576.
    2. Stathopoulos, P. & Paschereit, C.O., 2015. "Retrofitting micro gas turbines for wet operation. A way to increase operational flexibility in distributed CHP plants," Applied Energy, Elsevier, vol. 154(C), pages 438-446.
    3. Odi Fawwaz Alrebei & Abdulkarem I. Amhamed & Syed Mashruk & Phil Bowen & Agustin Valera Medina, 2021. "Planar Laser-Induced Fluorescence and Chemiluminescence Analyses of CO 2 -Argon-Steam Oxyfuel (CARSOXY) Combustion," Energies, MDPI, vol. 15(1), pages 1-23, December.
    4. Farzaneh-Gord, Mahmood & Deymi-Dashtebayaz, Mahdi, 2011. "Effect of various inlet air cooling methods on gas turbine performance," Energy, Elsevier, vol. 36(2), pages 1196-1205.
    5. Odi Fawwaz Alrebei & Philip Bowen & Agustin Valera Medina, 2020. "Parametric Study of Various Thermodynamic Cycles for the Use of Unconventional Blends," Energies, MDPI, vol. 13(18), pages 1-16, September.
    6. Delattin, Frank & Bram, Svend & Knoops, Sofie & De Ruyck, Jacques, 2008. "Effects of steam injection on microturbine efficiency and performance," Energy, Elsevier, vol. 33(2), pages 241-247.
    7. Guteša Božo, M. & Vigueras-Zuniga, MO. & Buffi, M. & Seljak, T. & Valera-Medina, A., 2019. "Fuel rich ammonia-hydrogen injection for humidified gas turbines," Applied Energy, Elsevier, vol. 251(C), pages 1-1.
    8. Szargut, J., 2002. "Cogeneration of network heat in the set of a humid air turbine," Energy, Elsevier, vol. 27(1), pages 1-15.
    9. Lee, Jong Jun & Jeon, Mu Sung & Kim, Tong Seop, 2010. "The influence of water and steam injection on the performance of a recuperated cycle microturbine for combined heat and power application," Applied Energy, Elsevier, vol. 87(4), pages 1307-1316, April.
    10. Aronis, Nikos & Leithner, Reinhard, 2004. "Combined cycle with low-quality heat integration and water injection into the compressed air," Energy, Elsevier, vol. 29(12), pages 1929-1943.
    11. Jonsson, Maria & Yan, Jinyue, 2005. "Humidified gas turbines—a review of proposed and implemented cycles," Energy, Elsevier, vol. 30(7), pages 1013-1078.
    12. De Paepe, Ward & Montero Carrero, Marina & Bram, Svend & Contino, Francesco & Parente, Alessandro, 2017. "Waste heat recovery optimization in micro gas turbine applications using advanced humidified gas turbine cycle concepts," Applied Energy, Elsevier, vol. 207(C), pages 218-229.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. De Paepe, Ward & Montero Carrero, Marina & Bram, Svend & Contino, Francesco & Parente, Alessandro, 2017. "Waste heat recovery optimization in micro gas turbine applications using advanced humidified gas turbine cycle concepts," Applied Energy, Elsevier, vol. 207(C), pages 218-229.
    2. Xu, Zhen & Lu, Yuan & Wang, Bo & Zhao, Lifeng & Chen, Changnian & Xiao, Yunhan, 2019. "Experimental evaluation of 100 kW grade micro humid air turbine cycles converted from a microturbine," Energy, Elsevier, vol. 175(C), pages 687-693.
    3. De Paepe, Ward & Delattin, Frank & Bram, Svend & De Ruyck, Jacques, 2013. "Water injection in a micro gas turbine – Assessment of the performance using a black box method," Applied Energy, Elsevier, vol. 112(C), pages 1291-1302.
    4. Zhang, Qing & Wang, Yuzhang & Jiang, Jiangjun & Weng, Shilie & Cao, Xiuling, 2022. "Coupling effect of key parameters of heat recovery components on the HAT cycle performance," Energy, Elsevier, vol. 238(PC).
    5. Montero Carrero, Marina & De Paepe, Ward & Bram, Svend & Parente, Alessandro & Contino, Francesco, 2017. "Does humidification improve the micro Gas Turbine cycle? Thermodynamic assessment based on Sankey and Grassmann diagrams," Applied Energy, Elsevier, vol. 204(C), pages 1163-1171.
    6. Zhao, Rongchao & Li, Weihua & Zhuge, Weilin & Zhang, Yangjun & Yin, Yong, 2017. "Numerical study on steam injection in a turbocompound diesel engine for waste heat recovery," Applied Energy, Elsevier, vol. 185(P1), pages 506-518.
    7. Renzi, Massimiliano & Patuzzi, Francesco & Baratieri, Marco, 2017. "Syngas feed of micro gas turbines with steam injection: Effects on performance, combustion and pollutants formation," Applied Energy, Elsevier, vol. 206(C), pages 697-707.
    8. Wang, Yuzhang & Zhang, Qing & Li, Yixing & He, Ming & Weng, Shilie, 2022. "Research on the effectiveness of the key components in the HAT cycle," Applied Energy, Elsevier, vol. 306(PB).
    9. Milana Guteša Božo & Agustin Valera-Medina, 2020. "Prediction of Novel Humified Gas Turbine Cycle Parameters for Ammonia/Hydrogen Fuels," Energies, MDPI, vol. 13(21), pages 1-20, November.
    10. Zhu, Guangya & Chow, T.T. & Fong, K.F. & Lee, C.K., 2019. "Comparative study on humidified gas turbine cycles with different air saturator designs," Applied Energy, Elsevier, vol. 254(C).
    11. Chacartegui, R. & Blanco, M.J. & Muñoz de Escalona, J.M. & Sánchez, D. & Sánchez, T., 2013. "Performance assessment of Molten Carbonate Fuel Cell–Humid Air Turbine hybrid systems," Applied Energy, Elsevier, vol. 102(C), pages 687-699.
    12. Montero Carrero, Marina & De Paepe, Ward & Bram, Svend & Musin, Frédéric & Parente, Alessandro & Contino, Francesco, 2016. "Humidified micro gas turbines for domestic users: An economic and primary energy savings analysis," Energy, Elsevier, vol. 117(P2), pages 429-438.
    13. De Paepe, Ward & Pappa, Alessio & Montero Carrero, Marina & Bricteux, Laurent & Contino, Francesco, 2020. "Reducing waste heat to the minimum: Thermodynamic assessment of the M-power cycle concept applied to micro Gas Turbines," Applied Energy, Elsevier, vol. 279(C).
    14. Shen, Yazhou & Nazir, Shareq Mohd & Zhang, Kai & Duwig, Christophe, 2023. "Waste heat recovery optimization in ammonia-based gas turbine applications," Energy, Elsevier, vol. 280(C).
    15. Guerra, Omar J. & Reklaitis, Gintaras V., 2018. "Advances and challenges in water management within energy systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 82(P3), pages 4009-4019.
    16. Mahdi Deymi-Dashtebayaz & Parisa Kazemiani-Najafabad, 2019. "Energy, Exergy, Economic, and Environmental analysis for various inlet air cooling methods on Shahid Hashemi-Nezhad gas turbines refinery," Energy & Environment, , vol. 30(3), pages 481-498, May.
    17. Giorgetti, S. & Bricteux, L. & Parente, A. & Blondeau, J. & Contino, F. & De Paepe, W., 2017. "Carbon capture on micro gas turbine cycles: Assessment of the performance on dry and wet operations," Applied Energy, Elsevier, vol. 207(C), pages 243-253.
    18. De Paepe, Ward & Delattin, Frank & Bram, Svend & De Ruyck, Jacques, 2012. "Steam injection experiments in a microturbine – A thermodynamic performance analysis," Applied Energy, Elsevier, vol. 97(C), pages 569-576.
    19. Kayadelen, Hasan Kayhan & Ust, Yasin & Bashan, Veysi, 2021. "Thermodynamic performance analysis of state of the art gas turbine cycles with inter-stage turbine reheat and steam injection," Energy, Elsevier, vol. 222(C).
    20. Simeon Dybe & Michael Bartlett & Jens Pålsson & Panagiotis Stathopoulos, 2021. "TopCycle: A Novel High Performance and Fuel Flexible Gas Turbine Cycle," Sustainability, MDPI, vol. 13(2), pages 1-18, January.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:15:y:2022:i:24:p:9527-:d:1004742. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.