IDEAS home Printed from https://ideas.repec.org/a/eee/reensy/v214y2021ics0951832021002416.html
   My bibliography  Save this article

Effect of environmental modelling and inspection strategy on the optimal design of floating wind turbines

Author

Listed:
  • Hegseth, John Marius
  • Bachynski, Erin E.
  • Leira, Bernt J.

Abstract

In order to reduce design conservatism and consequently the cost of energy, appropriate and cost-optimal safety factors should be derived, in light of environmental load uncertainties and lifetime costs. In the present work, a linearized dynamic model has been used together with Monte Carlo simulations and a numerical design optimization procedure to evaluate the impact of the description of wind and wave loads on the fatigue reliability and optimal design of a 10 MW spar floating wind turbine. Trade-offs between design costs and inspection costs with different design fatigue factors (DFFs) have also been assessed. The analyses have been performed for a realistic wind park site, where an environmental model has been developed based on hindcast data. Considering stochastic turbulence intensity, wind-wave misalignment, wind directional distribution, and a two-peak wave spectrum reduced the long-term fatigue damage by approximately two-thirds along the fatigue-critical part of the support structure compared to the base model. Re-designing the tower and platform with the full environmental model resulted in 11% reduction in CAPEX. However, due to the applied design optimization procedure, consistent reliability levels were achieved along the tower length, which resulted in important system side effects for the total structural reliability. Trade-offs between CAPEX and OPEX were derived based on a probabilistic fracture mechanics model and reliability updating through inspections. The necessary inspection intervals to achieve the same accumulated reliability after 20 years of operation were identified with different DFFs, and cost-optimal safety factors were computed with different OPEX costs and interest rates.

Suggested Citation

  • Hegseth, John Marius & Bachynski, Erin E. & Leira, Bernt J., 2021. "Effect of environmental modelling and inspection strategy on the optimal design of floating wind turbines," Reliability Engineering and System Safety, Elsevier, vol. 214(C).
    • Handle: RePEc:eee:reensy:v:214:y:2021:i:c:s0951832021002416
    DOI: 10.1016/j.ress.2021.107706
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0951832021002416
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ress.2021.107706?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Leira, B.J., 2016. "Reliability updating based on monitoring of structural response parameters," Reliability Engineering and System Safety, Elsevier, vol. 155(C), pages 212-223.
    2. Horn, Jan-Tore & Leira, Bernt J., 2019. "Fatigue reliability assessment of offshore wind turbines with stochastic availability," Reliability Engineering and System Safety, Elsevier, vol. 191(C).
    3. Nicky J. Welton & Howard H. Z. Thom, 2015. "Value of Information," Medical Decision Making, , vol. 35(5), pages 564-566, July.
    4. Dong, Wenbin & Moan, Torgeir & Gao, Zhen, 2012. "Fatigue reliability analysis of the jacket support structure for offshore wind turbine considering the effect of corrosion and inspection," Reliability Engineering and System Safety, Elsevier, vol. 106(C), pages 11-27.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Rezende, Filipe A. & Videiro, Paulo M. & Sagrilo, Luis V.S. & Oliveira, Mauro C., 2024. "Reliability-based fatigue inspection planning for mooring chains of floating systems," Reliability Engineering and System Safety, Elsevier, vol. 242(C).
    2. Ferri, Giulio & Marino, Enzo, 2023. "Site-specific optimizations of a 10 MW floating offshore wind turbine for the Mediterranean Sea," Renewable Energy, Elsevier, vol. 202(C), pages 921-941.
    3. Aboutalebi, Payam & Garrido, Aitor J. & Garrido, Izaskun & Nguyen, Dong Trong & Gao, Zhen, 2024. "Hydrostatic stability and hydrodynamics of a floating wind turbine platform integrated with oscillating water columns: A design study," Renewable Energy, Elsevier, vol. 221(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Yeter, B. & Garbatov, Y. & Guedes Soares, C., 2020. "Risk-based maintenance planning of offshore wind turbine farms," Reliability Engineering and System Safety, Elsevier, vol. 202(C).
    2. Wang, L. & Kolios, A. & Liu, X. & Venetsanos, D. & Rui, C., 2022. "Reliability of offshore wind turbine support structures: A state-of-the-art review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 161(C).
    3. Thapa, Mishal & Missoum, Samy, 2022. "Uncertainty quantification and global sensitivity analysis of composite wind turbine blades," Reliability Engineering and System Safety, Elsevier, vol. 222(C).
    4. Shittu, Abdulhakim Adeoye & Mehmanparast, Ali & Hart, Phil & Kolios, Athanasios, 2021. "Comparative study between S-N and fracture mechanics approach on reliability assessment of offshore wind turbine jacket foundations," Reliability Engineering and System Safety, Elsevier, vol. 215(C).
    5. Chen, Chao & Duffour, Philippe & Fromme, Paul & Hua, Xugang, 2021. "Numerically efficient fatigue life prediction of offshore wind turbines using aerodynamic decoupling," Renewable Energy, Elsevier, vol. 178(C), pages 1421-1434.
    6. Ramezani, Mahyar & Choe, Do-Eun & Heydarpour, Khashayar & Koo, Bonjun, 2023. "Uncertainty models for the structural design of floating offshore wind turbines: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 185(C).
    7. Lee, Alice J. & Ames, Daniel R., 2017. "“I can’t pay more” versus “It’s not worth more”: Divergent effects of constraint and disparagement rationales in negotiations," Organizational Behavior and Human Decision Processes, Elsevier, vol. 141(C), pages 16-28.
    8. Hussain, Hadia & Murtaza, Murtaza & Ajmal, Areeb & Ahmed, Afreen & Khan, Muhammad Ovais Khalid, 2020. "A study on the effects of social media advertisement on consumer’s attitude and customer response," MPRA Paper 104675, University Library of Munich, Germany.
    9. A. G. Fatullayev & Nizami A. Gasilov & Şahin Emrah Amrahov, 2019. "Numerical solution of linear inhomogeneous fuzzy delay differential equations," Fuzzy Optimization and Decision Making, Springer, vol. 18(3), pages 315-326, September.
    10. Arun Advani & William Elming & Jonathan Shaw, 2023. "The Dynamic Effects of Tax Audits," The Review of Economics and Statistics, MIT Press, vol. 105(3), pages 545-561, May.
    11. Aghion, Philippe & Akcigit, Ufuk & Lequien, Matthieu & Stantcheva, Stefanie, 2017. "Tax simplicity and heterogeneous learning," LSE Research Online Documents on Economics 86613, London School of Economics and Political Science, LSE Library.
    12. Marie Bjørneby & Annette Alstadsæter & Kjetil Telle, 2018. "Collusive tax evasion by employers and employees. Evidence from a randomized fi eld experiment in Norway," Discussion Papers 891, Statistics Norway, Research Department.
    13. Chuangen Gao & Shuyang Gu & Jiguo Yu & Hai Du & Weili Wu, 2022. "Adaptive seeding for profit maximization in social networks," Journal of Global Optimization, Springer, vol. 82(2), pages 413-432, February.
    14. Koessler, Frederic & Laclau, Marie & Renault, Jérôme & Tomala, Tristan, 2022. "Long information design," Theoretical Economics, Econometric Society, vol. 17(2), May.
    15. Annette Alstadsæter & Wojciech Kopczuk & Kjetil Telle, 2019. "Social networks and tax avoidance: evidence from a well-defined Norwegian tax shelter," International Tax and Public Finance, Springer;International Institute of Public Finance, vol. 26(6), pages 1291-1328, December.
    16. Sebastian Kaumanns, 2019. "“Some fuzzy math”: relational information on debt value adjustments by managers and the financial press," Business Research, Springer;German Academic Association for Business Research, vol. 12(2), pages 755-794, December.
    17. Samuel J Gershman, 2015. "A Unifying Probabilistic View of Associative Learning," PLOS Computational Biology, Public Library of Science, vol. 11(11), pages 1-20, November.
    18. Deirdre O’Donnell & Jimmy Murphy & Vikram Pakrashi, 2020. "Damage Monitoring of a Catenary Moored Spar Platform for Renewable Energy Devices," Energies, MDPI, vol. 13(14), pages 1-22, July.
    19. Arun Advani, 2022. "Who does and doesn't pay taxes?," Fiscal Studies, John Wiley & Sons, vol. 43(1), pages 5-22, March.
    20. Steve Fortin & Ahmad Hammami & Michel Magnan, 2021. "Re‐exploring Fair Value Accounting and Value Relevance: An Examination of Underlying Securities," Abacus, Accounting Foundation, University of Sydney, vol. 57(2), pages 220-250, June.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:reensy:v:214:y:2021:i:c:s0951832021002416. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: https://www.journals.elsevier.com/reliability-engineering-and-system-safety .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.