IDEAS home Printed from https://ideas.repec.org/a/eee/proeco/v249y2022ics0925527322001141.html
   My bibliography  Save this article

How additive manufacturing drives business model change: The perspective of logistics service providers

Author

Listed:
  • Friedrich, Anne
  • Lange, Anne
  • Elbert, Ralf

Abstract

Additive manufacturing (AM) is expected to facilitate local manufacturing in shorter, less complex supply chains and, thus, impact the demand for traditional logistics services. With increasing dissemination, AM confronts logistics service providers (LSPs) with the question of how they should adapt their business model to the threats and opportunities that come with the emerging digital technologies. We structure the AM activities of LSPs and develop a deep understanding of their resulting business model dynamics. For this exploratory purpose, this study develops a taxonomy and performs a cluster analysis to present six clusters of how LSPs approach AM today. The six profiles include LSPs that reactively monitor AM or, in contrast, proactively leverage AM for their internal operations and the development of new services for their external customers. Among them, four profiles entail fundamental changes to the traditional business models of LSPs. We find that these LSPs oftentimes continue to rely on their traditional “analog” service strengths to offer integrated service bundles of AM and logistics solutions. They bridge their lack of specific resources by strategic alliances with AM experts. Only a few LSPs have started severing ties to their traditional businesses to develop digitally dominated, platform-based AM services that require different resources. Overall, the comprehensive picture of AM activities enables us to contribute to the knowledge of how LSPs navigate in the digital age and to the nexus of business model dynamics and emerging technologies. We propose a set of propositions and support practitioners in analyzing and designing AM activities.

Suggested Citation

  • Friedrich, Anne & Lange, Anne & Elbert, Ralf, 2022. "How additive manufacturing drives business model change: The perspective of logistics service providers," International Journal of Production Economics, Elsevier, vol. 249(C).
    • Handle: RePEc:eee:proeco:v:249:y:2022:i:c:s0925527322001141
    DOI: 10.1016/j.ijpe.2022.108521
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0925527322001141
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ijpe.2022.108521?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Despeisse, M. & Baumers, M. & Brown, P. & Charnley, F. & Ford, S.J. & Garmulewicz, A. & Knowles, S. & Minshall, T.H.W. & Mortara, L. & Reed-Tsochas, F.P. & Rowley, J., 2017. "Unlocking value for a circular economy through 3D printing: A research agenda," Technological Forecasting and Social Change, Elsevier, vol. 115(C), pages 75-84.
    2. Bogers, Marcel & Hadar, Ronen & Bilberg, Arne, 2016. "Additive manufacturing for consumer-centric business models: Implications for supply chains in consumer goods manufacturing," Technological Forecasting and Social Change, Elsevier, vol. 102(C), pages 225-239.
    3. Rong, Ke & Patton, Dean & Chen, Weiwei, 2018. "Business models dynamics and business ecosystems in the emerging 3D printing industry," Technological Forecasting and Social Change, Elsevier, vol. 134(C), pages 234-245.
    4. Thomas-Seale, L.E.J. & Kirkman-Brown, J.C. & Attallah, M.M. & Espino, D.M. & Shepherd, D.E.T., 2018. "The barriers to the progression of additive manufacture: Perspectives from UK industry," International Journal of Production Economics, Elsevier, vol. 198(C), pages 104-118.
    5. Alina Sorescu & Nooshin L. Warren & Larisa Ertekin, 2017. "Event study methodology in the marketing literature: an overview," Journal of the Academy of Marketing Science, Springer, vol. 45(2), pages 186-207, March.
    6. Zhen Chen, 2017. "The Influence of 3D Printing on Global Container Multimodal Transport System," Complexity, Hindawi, vol. 2017, pages 1-19, November.
    7. N. Knofius & M. C. Heijden & A. Sleptchenko & W. H. M. Zijm, 2021. "Improving effectiveness of spare parts supply by additive manufacturing as dual sourcing option," OR Spectrum: Quantitative Approaches in Management, Springer;Gesellschaft für Operations Research e.V., vol. 43(1), pages 189-221, March.
    8. Felix W. Baumann & Dieter Roller, 2017. "Overview of German Additive Manufacturing Companies," Data, MDPI, vol. 2(3), pages 1-17, July.
    9. Samina Karim & Will Mitchell, 2000. "Path‐dependent and path‐breaking change: reconfiguring business resources following acquisitions in the U.S. medical sector, 1978–1995," Strategic Management Journal, Wiley Blackwell, vol. 21(10‐11), pages 1061-1081, October.
    10. Raphael Amit & Christoph Zott, 2001. "Value creation in E‐business," Strategic Management Journal, Wiley Blackwell, vol. 22(6‐7), pages 493-520, June.
    11. Chekurov, Sergei & Metsä-Kortelainen, Sini & Salmi, Mika & Roda, Irene & Jussila, Ari, 2018. "The perceived value of additively manufactured digital spare parts in industry: An empirical investigation," International Journal of Production Economics, Elsevier, vol. 205(C), pages 87-97.
    12. Tava Lennon Olsen & Brian Tomlin, 2020. "Industry 4.0: Opportunities and Challenges for Operations Management," Manufacturing & Service Operations Management, INFORMS, vol. 22(1), pages 113-122, January.
    13. Carbone, Valentina & Stone, Marilyn A., 2005. "Growth and relational strategies used by the European logistics service providers: Rationale and outcomes," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 41(6), pages 495-510, November.
    14. Henry Chesbrough & Richard S. Rosenbloom, 2002. "The role of the business model in capturing value from innovation: evidence from Xerox Corporation's technology spin-off companies," Industrial and Corporate Change, Oxford University Press and the Associazione ICC, vol. 11(3), pages 529-555, June.
    15. Gérard P. Cachon, 2020. "A Research Framework for Business Models: What Is Common Among Fast Fashion, E-Tailing, and Ride Sharing?," Management Science, INFORMS, vol. 66(3), pages 1172-1192, March.
    16. Beltagui, Ahmad & Rosli, Ainurul & Candi, Marina, 2020. "Exaptation in a digital innovation ecosystem: The disruptive impacts of 3D printing," Research Policy, Elsevier, vol. 49(1).
    17. Jagjit Singh Srai & Mukesh Kumar & Gary Graham & Wendy Phillips & James Tooze & Simon Ford & Paul Beecher & Baldev Raj & Mike Gregory & Manoj Kumar Tiwari & B. Ravi & Andy Neely & Ravi Shankar & Fiona, 2016. "Distributed manufacturing: scope, challenges and opportunities," International Journal of Production Research, Taylor & Francis Journals, vol. 54(23), pages 6917-6935, December.
    18. Li Chen & Yao Cui & Hau L. Lee, 2021. "Retailing with 3D Printing," Production and Operations Management, Production and Operations Management Society, vol. 30(7), pages 1986-2007, July.
    19. Holzmann, Patrick & Breitenecker, Robert J. & Schwarz, Erich J. & Gregori, Patrick, 2020. "Business model design for novel technologies in nascent industries: An investigation of 3D printing service providers," Technological Forecasting and Social Change, Elsevier, vol. 159(C).
    20. Kathleen M. Eisenhardt & Jeffrey A. Martin, 2000. "Dynamic capabilities: what are they?," Strategic Management Journal, Wiley Blackwell, vol. 21(10‐11), pages 1105-1121, October.
    21. Arbabian, Mohammad E., 2022. "Supply Chain Coordination via Additive Manufacturing," International Journal of Production Economics, Elsevier, vol. 243(C).
    22. Wouter Boon & Bert van Wee, 2018. "Influence of 3D printing on transport: a theory and experts judgment based conceptual model," Transport Reviews, Taylor & Francis Journals, vol. 38(5), pages 556-575, September.
    23. André O Laplume & Bent Petersen & Joshua M Pearce, 2016. "Global value chains from a 3D printing perspective," Journal of International Business Studies, Palgrave Macmillan;Academy of International Business, vol. 47(5), pages 595-609, June.
    24. Appleyard, Mathew, 2015. "Corporate responses to online music piracy: Strategic lessons for the challenge of additive manufacturing," Business Horizons, Elsevier, vol. 58(1), pages 69-76.
    25. Kwak, Kiho & Kim, Wonjoon & Park, Kyungbae, 2018. "Complementary multiplatforms in the growing innovation ecosystem: Evidence from 3D printing technology," Technological Forecasting and Social Change, Elsevier, vol. 136(C), pages 192-207.
    26. Büyüközkan, Gülçin & Feyzioglu, Orhan & Sakir Ersoy, Mehmet, 2009. "Evaluation of 4PL operating models: A decision making approach based on 2-additive Choquet integral," International Journal of Production Economics, Elsevier, vol. 121(1), pages 112-120, September.
    27. Henner Gimpel & Daniel Rau & Maximilian Röglinger, 2018. "Understanding FinTech start-ups – a taxonomy of consumer-oriented service offerings," Electronic Markets, Springer;IIM University of St. Gallen, vol. 28(3), pages 245-264, August.
    28. Weller, Christian & Kleer, Robin & Piller, Frank T., 2015. "Economic implications of 3D printing: Market structure models in light of additive manufacturing revisited," International Journal of Production Economics, Elsevier, vol. 164(C), pages 43-56.
    29. Erik Hofmann & Florin Osterwalder, 2017. "Third-Party Logistics Providers in the Digital Age: Towards a New Competitive Arena?," Logistics, MDPI, vol. 1(2), pages 1-28, November.
    30. Rayna, Thierry & Striukova, Ludmila, 2016. "From rapid prototyping to home fabrication: How 3D printing is changing business model innovation," Technological Forecasting and Social Change, Elsevier, vol. 102(C), pages 214-224.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Liu, Baolong & Wang, Weilong, 2023. "Live commerce retailing with online influencers: Two business models," International Journal of Production Economics, Elsevier, vol. 255(C).
    2. Beltagui, Ahmad & Gold, Stefan & Kunz, Nathan & Reiner, Gerald, 2023. "Special Issue: Rethinking operations and supply chain management in light of the 3D printing revolution," International Journal of Production Economics, Elsevier, vol. 255(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Marić, Josip & Opazo-Basáez, Marco & Vlačić, Božidar & Dabić, Marina, 2023. "Innovation management of three-dimensional printing (3DP) technology: Disclosing insights from existing literature and determining future research streams," Technological Forecasting and Social Change, Elsevier, vol. 193(C).
    2. Holzmann, Patrick & Breitenecker, Robert J. & Schwarz, Erich J. & Gregori, Patrick, 2020. "Business model design for novel technologies in nascent industries: An investigation of 3D printing service providers," Technological Forecasting and Social Change, Elsevier, vol. 159(C).
    3. Naghshineh, Bardia & Carvalho, Helena, 2022. "The implications of additive manufacturing technology adoption for supply chain resilience: A systematic search and review," International Journal of Production Economics, Elsevier, vol. 247(C).
    4. Marco Savastano & Carlo Amendola & Francesco Bellini & Fabrizio D’Ascenzo, 2019. "Contextual Impacts on Industrial Processes Brought by the Digital Transformation of Manufacturing: A Systematic Review," Sustainability, MDPI, vol. 11(3), pages 1-38, February.
    5. Shivam Gupta & Sachin Modgil & Piera Centobelli & Roberto Cerchione & Serena Strazzullo, 2022. "Additive Manufacturing and Green Information Systems as Technological Capabilities for Firm Performance," Global Journal of Flexible Systems Management, Springer;Global Institute of Flexible Systems Management, vol. 23(4), pages 515-534, December.
    6. Beltagui, Ahmad & Sesis, Achilleas & Stylos, Nikolaos, 2021. "A bricolage perspective on democratising innovation: The case of 3D printing in makerspaces," Technological Forecasting and Social Change, Elsevier, vol. 163(C).
    7. Culot, Giovanna & Orzes, Guido & Sartor, Marco & Nassimbeni, Guido, 2020. "The future of manufacturing: A Delphi-based scenario analysis on Industry 4.0," Technological Forecasting and Social Change, Elsevier, vol. 157(C).
    8. Naghshineh, Bardia & Ribeiro, André & Jacinto, Celeste & Carvalho, Helena, 2021. "Social impacts of additive manufacturing: A stakeholder-driven framework," Technological Forecasting and Social Change, Elsevier, vol. 164(C).
    9. Rayna, Thierry & Striukova, Ludmila, 2021. "Assessing the effect of 3D printing technologies on entrepreneurship: An exploratory study," Technological Forecasting and Social Change, Elsevier, vol. 164(C).
    10. Foshammer, Jeppe & Søberg, Peder Veng & Helo, Petri & Ituarte, Iñigo Flores, 2022. "Identification of aftermarket and legacy parts suitable for additive manufacturing: A knowledge management-based approach," International Journal of Production Economics, Elsevier, vol. 253(C).
    11. Chekurov, Sergei & Metsä-Kortelainen, Sini & Salmi, Mika & Roda, Irene & Jussila, Ari, 2018. "The perceived value of additively manufactured digital spare parts in industry: An empirical investigation," International Journal of Production Economics, Elsevier, vol. 205(C), pages 87-97.
    12. Beltagui, Ahmad & Kunz, Nathan & Gold, Stefan, 2020. "The role of 3D printing and open design on adoption of socially sustainable supply chain innovation," International Journal of Production Economics, Elsevier, vol. 221(C).
    13. Kleer, Robin & Piller, Frank T., 2019. "Local manufacturing and structural shifts in competition: Market dynamics of additive manufacturing," International Journal of Production Economics, Elsevier, vol. 216(C), pages 23-34.
    14. Mingfeng Tang & Grace Sheila Walsh & Cuiwen Li & Angathevar Baskaran, 2021. "Exploring technology business incubators and their business incubation models: case studies from China," The Journal of Technology Transfer, Springer, vol. 46(1), pages 90-116, February.
    15. Maria Rosa De Giacomo & Raimund Bleischwitz, 2020. "Business models for environmental sustainability: Contemporary shortcomings and some perspectives," Business Strategy and the Environment, Wiley Blackwell, vol. 29(8), pages 3352-3369, December.
    16. Nazanin Hosseini Arian & Alireza Pooya & Fariborz Rahimnia & Ali Sibevei, 2021. "Assessment the effect of rapid prototyping implementation on supply chain sustainability: a system dynamics approach," Operations Management Research, Springer, vol. 14(3), pages 467-493, December.
    17. Caviggioli, Federico & Ughetto, Elisa, 2019. "A bibliometric analysis of the research dealing with the impact of additive manufacturing on industry, business and society," International Journal of Production Economics, Elsevier, vol. 208(C), pages 254-268.
    18. Eleonora Di Maria & Valentina De Marchi & Ambra Galeazzo, 2022. "Industry 4.0 technologies and circular economy: The mediating role of supply chain integration," Business Strategy and the Environment, Wiley Blackwell, vol. 31(2), pages 619-632, February.
    19. Martin Hannibal, 2020. "The influence of additive manufacturing on early internationalization: considerations into potential avenues of IE research," Journal of International Entrepreneurship, Springer, vol. 18(4), pages 473-491, December.
    20. Harm-Jan Steenhuis & Xin Fang & Tolga Ulusemre, 2020. "Global Diffusion of Innovation during the Fourth Industrial Revolution: The Case of Additive Manufacturing or 3D Printing," International Journal of Innovation and Technology Management (IJITM), World Scientific Publishing Co. Pte. Ltd., vol. 17(01), pages 1-34, February.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:proeco:v:249:y:2022:i:c:s0925527322001141. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/ijpe .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.