IDEAS home Printed from https://ideas.repec.org/a/eee/proeco/v228y2020ics0925527320300815.html
   My bibliography  Save this article

The effect of additive manufacturing adoption on supply chain flexibility and performance: An empirical analysis from the automotive industry

Author

Listed:
  • Delic, Mia
  • Eyers, Daniel R.

Abstract

The purpose of this paper is to provide a conceptual framework for analyzing the relationships among Additive Manufacturing adoption, flexibility, and performance in the supply chain context. No empirical study was found in the supply chain literature that specifically examines the relationships among Additive Manufacturing adoption, flexibility and performance; the paper therefore fills an important gap in the supply chain literature. The research is based on a quantitative approach using a questionnaire survey from a total of 124 medium-and large-sized European Union automotive manufacturing companies. The hypothesized relationships are tested using partial least square structural equation modeling (PLS-SEM). The research provides insights into how supply chain flexibility mediates the effect of Additive Manufacturing adoption on supply chain performance in the context of European automotive industry. Research findings indicate that Additive Manufacturing adoption positively impacts supply chain flexibility and that, in turn, supply chain flexibility positively impacts supply chain performance. This suggests that companies should focus on flexibilities in the supply chain to improve its performance. Overall, these findings provide important insights into the value of Additive Manufacturing adoption for supply chain flexibility and performance.

Suggested Citation

  • Delic, Mia & Eyers, Daniel R., 2020. "The effect of additive manufacturing adoption on supply chain flexibility and performance: An empirical analysis from the automotive industry," International Journal of Production Economics, Elsevier, vol. 228(C).
    • Handle: RePEc:eee:proeco:v:228:y:2020:i:c:s0925527320300815
    DOI: 10.1016/j.ijpe.2020.107689
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0925527320300815
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ijpe.2020.107689?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Purvis, Laura & Gosling, Jonathan & Naim, Mohamed M., 2014. "The development of a lean, agile and leagile supply network taxonomy based on differing types of flexibility," International Journal of Production Economics, Elsevier, vol. 151(C), pages 100-111.
    2. BLOME, Constantin & SCHOENHERR, Tobias & ECKSTEIN, Dominik, 2014. "The impact of knowledge transfer and complexity on supply chain flexibility: a knowledge-based view," LIDAM Reprints CORE 2603, Université catholique de Louvain, Center for Operations Research and Econometrics (CORE).
    3. Ng, Irene & Scharf, Kimberley & Pogrebna, Ganna & Maull, Roger, 2015. "Contextual variety, Internet-of-Things and the choice of tailoring over platform: Mass customisation strategy in supply chain management," International Journal of Production Economics, Elsevier, vol. 159(C), pages 76-87.
    4. Hazen, Benjamin T. & Bradley, Randy V. & Bell, John E. & In, Joonhwan & Byrd, Terry A., 2017. "Enterprise architecture: A competence-based approach to achieving agility and firm performance," International Journal of Production Economics, Elsevier, vol. 193(C), pages 566-577.
    5. Garavelli, A. Claudio, 2003. "Flexibility configurations for the supply chain management," International Journal of Production Economics, Elsevier, vol. 85(2), pages 141-153, August.
    6. He, Yuanqiong & Keung Lai, Kin & Sun, Hongyi & Chen, Yun, 2014. "The impact of supplier integration on customer integration and new product performance: The mediating role of manufacturing flexibility under trust theory," International Journal of Production Economics, Elsevier, vol. 147(PB), pages 260-270.
    7. Thomé, Antonio Márcio T. & Scavarda, Luiz Felipe & Pires, Sílvio R.I. & Ceryno, Paula & Klingebiel, Katja, 2014. "A multi-tier study on supply chain flexibility in the automotive industry," International Journal of Production Economics, Elsevier, vol. 158(C), pages 91-105.
    8. Alford, Dave & Sackett, Peter & Nelder, Geoff, 2000. "Mass customisation -- an automotive perspective," International Journal of Production Economics, Elsevier, vol. 65(1), pages 99-110, April.
    9. Schniederjans, Dara G., 2017. "Adoption of 3D-printing technologies in manufacturing: A survey analysis," International Journal of Production Economics, Elsevier, vol. 183(PA), pages 287-298.
    10. Thomas-Seale, L.E.J. & Kirkman-Brown, J.C. & Attallah, M.M. & Espino, D.M. & Shepherd, D.E.T., 2018. "The barriers to the progression of additive manufacture: Perspectives from UK industry," International Journal of Production Economics, Elsevier, vol. 198(C), pages 104-118.
    11. Jin, Yan & Vonderembse, Mark & Ragu-Nathan, T.S. & Smith, Joy Turnheim, 2014. "Exploring relationships among IT-enabled sharing capability, supply chain flexibility, and competitive performance," International Journal of Production Economics, Elsevier, vol. 153(C), pages 24-34.
    12. Yadlapalli, Aswini & Rahman, Shams & Gunasekaran, Angappa, 2018. "Socially responsible governance mechanisms for manufacturing firms in apparel supply chains," International Journal of Production Economics, Elsevier, vol. 196(C), pages 135-149.
    13. I. Nyoman Pujawan, 2004. "Assessing supply chain flexibility: a conceptual framework and case study," International Journal of Integrated Supply Management, Inderscience Enterprises Ltd, vol. 1(1), pages 79-97.
    14. Katiyar, Rajesh & Meena, Purushottam L. & Barua, Mukesh Kumar & Tibrewala, Rajen & Kumar, Gopal, 2018. "Impact of sustainability and manufacturing practices on supply chain performance: Findings from an emerging economy," International Journal of Production Economics, Elsevier, vol. 197(C), pages 303-316.
    15. Trautrims, Alexander & MacCarthy, Bart L. & Okade, Chetan, 2017. "Building an innovation-based supplier portfolio: The use of patent analysis in strategic supplier selection in the automotive sector," International Journal of Production Economics, Elsevier, vol. 194(C), pages 228-236.
    16. Li, Suhong & Ragu-Nathan, Bhanu & Ragu-Nathan, T.S. & Subba Rao, S., 2006. "The impact of supply chain management practices on competitive advantage and organizational performance," Omega, Elsevier, vol. 34(2), pages 107-124, April.
    17. Gosling, J. & Purvis, L. & Naim, M.M., 2010. "Supply chain flexibility as a determinant of supplier selection," International Journal of Production Economics, Elsevier, vol. 128(1), pages 11-21, November.
    18. Seebacher, Gottfried & Winkler, Herwig, 2015. "A capability approach to evaluate supply chain flexibility," International Journal of Production Economics, Elsevier, vol. 167(C), pages 177-186.
    19. Merschmann, Ulf & Thonemann, Ulrich W., 2011. "Supply chain flexibility, uncertainty and firm performance: An empirical analysis of German manufacturing firms," International Journal of Production Economics, Elsevier, vol. 130(1), pages 43-53, March.
    20. Moon, Karen Ka-Leung & Yi, Candace Ying & Ngai, E.W.T., 2012. "An instrument for measuring supply chain flexibility for the textile and clothing companies," European Journal of Operational Research, Elsevier, vol. 222(2), pages 191-203.
    21. Perona, Marco & Miragliotta, Giovanni, 2004. "Complexity management and supply chain performance assessment. A field study and a conceptual framework," International Journal of Production Economics, Elsevier, vol. 90(1), pages 103-115, July.
    22. Chan, Hing Kai & Griffin, James & Lim, Jia Jia & Zeng, Fangli & Chiu, Anthony S.F., 2018. "The impact of 3D Printing Technology on the supply chain: Manufacturing and legal perspectives," International Journal of Production Economics, Elsevier, vol. 205(C), pages 156-162.
    23. Mellor, Stephen & Hao, Liang & Zhang, David, 2014. "Additive manufacturing: A framework for implementation," International Journal of Production Economics, Elsevier, vol. 149(C), pages 194-201.
    24. Atul Kumar Tiwari & Anunay Tiwari & Cherian Samuel, 2015. "Supply chain flexibility: a comprehensive review," Management Research Review, Emerald Group Publishing Limited, vol. 38(7), pages 767-792, July.
    25. Dalenogare, Lucas Santos & Benitez, Guilherme Brittes & Ayala, Néstor Fabián & Frank, Alejandro Germán, 2018. "The expected contribution of Industry 4.0 technologies for industrial performance," International Journal of Production Economics, Elsevier, vol. 204(C), pages 383-394.
    26. Gunasekaran, A. & Patel, C. & McGaughey, Ronald E., 2004. "A framework for supply chain performance measurement," International Journal of Production Economics, Elsevier, vol. 87(3), pages 333-347, February.
    27. Blome, Constantin & Schoenherr, Tobias & Eckstein, Dominik, 2014. "The impact of knowledge transfer and complexity on supply chain flexibility: A knowledge-based view," International Journal of Production Economics, Elsevier, vol. 147(PB), pages 307-316.
    28. Weller, Christian & Kleer, Robin & Piller, Frank T., 2015. "Economic implications of 3D printing: Market structure models in light of additive manufacturing revisited," International Journal of Production Economics, Elsevier, vol. 164(C), pages 43-56.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Marta Pérez-Pérez & Canan Kocabasoglu-Hillmer & Ana María Serrano-Bedia & María Concepción López-Fernández, 2019. "Manufacturing and Supply Chain Flexibility: Building an Integrative Conceptual Model Through Systematic Literature Review and Bibliometric Analysis," Global Journal of Flexible Systems Management, Springer;Global Institute of Flexible Systems Management, vol. 20(1), pages 1-23, December.
    2. Yu, Kangkang & Cadeaux, Jack & Luo, Ben Nanfeng, 2015. "Operational flexibility: Review and meta-analysis," International Journal of Production Economics, Elsevier, vol. 169(C), pages 190-202.
    3. Enrique, Daisy Valle & Lerman, Laura Visintainer & Sousa, Paulo Renato de & Benitez, Guilherme Brittes & Bigares Charrua Santos, Fernando M. & Frank, Alejandro G., 2022. "Being digital and flexible to navigate the storm: How digital transformation enhances supply chain flexibility in turbulent environments," International Journal of Production Economics, Elsevier, vol. 250(C).
    4. Jafari, Hamid & Eslami, Mohammad H. & Paulraj, Antony, 2022. "Postponement and logistics flexibility in retailing: The moderating role of logistics integration and demand uncertainty," International Journal of Production Economics, Elsevier, vol. 243(C).
    5. Liu, Yang & Zhang, Yufeng & Batista, Luciano & Rong, Ke, 2019. "Green operations: What's the role of supply chain flexibility?," International Journal of Production Economics, Elsevier, vol. 214(C), pages 30-43.
    6. Sricharan Chirra & Dinesh Kumar, 2018. "Evaluation of Supply Chain Flexibility in Automobile Industry with Fuzzy DEMATEL Approach," Global Journal of Flexible Systems Management, Springer;Global Institute of Flexible Systems Management, vol. 19(4), pages 305-319, December.
    7. Jorge L. GARCIA-ALCARAZ & Aide A. MALDONADO-MACIAS & Juan L. HERNANDEZ-ARELLANO & Julio BLANCO-FERNANDEZ & Emilio JIMENEZ-MACIAS & Juan C. SAENZ-DIEZ MURO, 2017. "The impact of human resources on the agility, flexibility and performance of wine supply chains," Agricultural Economics, Czech Academy of Agricultural Sciences, vol. 63(4), pages 175-184.
    8. Sun, Luoyi & Hua, Guowei & Cheng, T.C.E. & Wang, Yixiao, 2020. "How to price 3D-printed products? Pricing strategy for 3D printing platforms," International Journal of Production Economics, Elsevier, vol. 226(C).
    9. Naghshineh, Bardia & Carvalho, Helena, 2022. "The implications of additive manufacturing technology adoption for supply chain resilience: A systematic search and review," International Journal of Production Economics, Elsevier, vol. 247(C).
    10. Beltagui, Ahmad & Kunz, Nathan & Gold, Stefan, 2020. "The role of 3D printing and open design on adoption of socially sustainable supply chain innovation," International Journal of Production Economics, Elsevier, vol. 221(C).
    11. Wagner, Stephan M. & Grosse-Ruyken, Pan Theo & Erhun, Feryal, 2018. "Determinants of sourcing flexibility and its impact on performance," International Journal of Production Economics, Elsevier, vol. 205(C), pages 329-341.
    12. Marić, Josip & Opazo-Basáez, Marco & Vlačić, Božidar & Dabić, Marina, 2023. "Innovation management of three-dimensional printing (3DP) technology: Disclosing insights from existing literature and determining future research streams," Technological Forecasting and Social Change, Elsevier, vol. 193(C).
    13. Turkcan, Hulya & Imamoglu, Salih Zeki & Ince, Huseyin, 2022. "To be more innovative and more competitive in dynamic environments: The role of additive manufacturing," International Journal of Production Economics, Elsevier, vol. 246(C).
    14. Qian Zhou & Shuxiang Wang, 2021. "Study on the Relations of Supply Chain Digitization, Flexibility and Sustainable Development—A Moderated Multiple Mediation Model," Sustainability, MDPI, vol. 13(18), pages 1-19, September.
    15. Masoud Esmaeilikia & Behnam Fahimnia & Joeseph Sarkis & Kannan Govindan & Arun Kumar & John Mo, 2016. "A tactical supply chain planning model with multiple flexibility options: an empirical evaluation," Annals of Operations Research, Springer, vol. 244(2), pages 429-454, September.
    16. Sreedevi, R. & Saranga, Haritha, 2017. "Uncertainty and supply chain risk: The moderating role of supply chain flexibility in risk mitigation," International Journal of Production Economics, Elsevier, vol. 193(C), pages 332-342.
    17. Stornelli, Aldo & Ozcan, Sercan & Simms, Christopher, 2021. "Advanced manufacturing technology adoption and innovation: A systematic literature review on barriers, enablers, and innovation types," Research Policy, Elsevier, vol. 50(6).
    18. Nudurupati, Sai Sudhakar & Bhattacharya, Arijit & Lascelles, David & Caton, Nicholas, 2015. "Strategic sourcing with multi-stakeholders through value co-creation: An evidence from global health care company," International Journal of Production Economics, Elsevier, vol. 166(C), pages 248-257.
    19. Foshammer, Jeppe & Søberg, Peder Veng & Helo, Petri & Ituarte, Iñigo Flores, 2022. "Identification of aftermarket and legacy parts suitable for additive manufacturing: A knowledge management-based approach," International Journal of Production Economics, Elsevier, vol. 253(C).
    20. Muhammad Zafar Yaqub & Abdullah Alsabban, 2023. "Industry-4.0-Enabled Digital Transformation: Prospects, Instruments, Challenges, and Implications for Business Strategies," Sustainability, MDPI, vol. 15(11), pages 1-33, May.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:proeco:v:228:y:2020:i:c:s0925527320300815. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/ijpe .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.