IDEAS home Printed from https://ideas.repec.org/a/eee/proeco/v174y2016icp111-118.html
   My bibliography  Save this article

Simultaneous product family and supply chain design: An optimization approach

Author

Listed:
  • Baud-Lavigne, Bertrand
  • Agard, Bruno
  • Penz, Bernard

Abstract

This paper deals with the difficult problem of joint product family and supply chain design. We present a general model that simultaneously considers the construction of the bill of materials and the design of the supply chain network. For the bill of materials, product, sub-assembly and component substitution possibilities are considered. For the supply chain network, facility and distribution center location are considered as well as the choice of suppliers. A Mixed Integer Linear Program (MILP) model is proposed. The MILP formulation is solved optimally for medium-sized instances. For larger instances, two heuristics derived from the MILP are designed. These methods are computationally tested on various instances from a generator conceived for this purpose. The modelling of product substitution possibilities through product transformation permits the solving of large size instances that are now adequate for real problems.

Suggested Citation

  • Baud-Lavigne, Bertrand & Agard, Bruno & Penz, Bernard, 2016. "Simultaneous product family and supply chain design: An optimization approach," International Journal of Production Economics, Elsevier, vol. 174(C), pages 111-118.
    • Handle: RePEc:eee:proeco:v:174:y:2016:i:c:p:111-118
    DOI: 10.1016/j.ijpe.2016.01.015
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0925527316000165
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ijpe.2016.01.015?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Jean-François Cordeau & Federico Pasin & Marius Solomon, 2006. "An integrated model for logistics network design," Annals of Operations Research, Springer, vol. 144(1), pages 59-82, April.
    2. Lamothe, Jacques & Hadj-Hamou, Khaled & Aldanondo, Michel, 2006. "An optimization model for selecting a product family and designing its supply chain," European Journal of Operational Research, Elsevier, vol. 169(3), pages 1030-1047, March.
    3. Olivier Briant & Denis Naddef, 2004. "The Optimal Diversity Management Problem," Operations Research, INFORMS, vol. 52(4), pages 515-526, August.
    4. Agard, Bruno & Penz, Bernard, 2009. "A simulated annealing method based on a clustering approach to determine bills of materials for a large product family," International Journal of Production Economics, Elsevier, vol. 117(2), pages 389-401, February.
    5. Nepal, Bimal & Monplaisir, Leslie & Famuyiwa, Oluwafemi, 2012. "Matching product architecture with supply chain design," European Journal of Operational Research, Elsevier, vol. 216(2), pages 312-325.
    6. Ulrich W. Thonemann & Margaret L. Brandeau, 2000. "Optimal Commonality in Component Design," Operations Research, INFORMS, vol. 48(1), pages 1-19, February.
    7. Chen, Hung-Yi, 2010. "The impact of item substitutions on production-distribution networks for supply chains," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 46(6), pages 803-819, November.
    8. Thanh, Phuong Nga & Bostel, Nathalie & Péton, Olivier, 2008. "A dynamic model for facility location in the design of complex supply chains," International Journal of Production Economics, Elsevier, vol. 113(2), pages 678-693, June.
    9. Baud-Lavigne, Bertrand & Agard, Bruno & Penz, Bernard, 2012. "Mutual impacts of product standardization and supply chain design," International Journal of Production Economics, Elsevier, vol. 135(1), pages 50-60.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Cortinhal, M. J. & Lopes, M. J. & Melo, M. T., 2018. "Impact of partial product outsourcing, transportation mode selection, and single-assignment requirements on the design of a multi-stage supply chain network," Technical Reports on Logistics of the Saarland Business School 15, Saarland University of Applied Sciences (htw saar), Saarland Business School.
    2. Holzapfel, Andreas & Potoczki, Tobias & Kuhn, Heinrich, 2023. "Designing the breadth and depth of distribution networks in the retail trade," International Journal of Production Economics, Elsevier, vol. 257(C).
    3. Sina Abbasi & Ilias Vlachos & Ali Samadzadeh & Shayan Etemadifar & Mohamad Afshar & Mohsen Amra, 2024. "Modelling a Logistics and Financial Supply Chain Network during the COVID-19 Era," Logistics, MDPI, vol. 8(1), pages 1-21, March.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Rezapour, Shabnam & Hassani, Ashkan & Farahani, Reza Zanjirani, 2015. "Concurrent design of product family and supply chain network considering quality and price," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 81(C), pages 18-35.
    2. Baud-Lavigne, Bertrand & Agard, Bruno & Penz, Bernard, 2012. "Mutual impacts of product standardization and supply chain design," International Journal of Production Economics, Elsevier, vol. 135(1), pages 50-60.
    3. Xiong, Yixuan & Du, Gang & Jiao, Roger J., 2018. "Modular product platforming with supply chain postponement decisions by leader-follower interactive optimization," International Journal of Production Economics, Elsevier, vol. 205(C), pages 272-286.
    4. Ariane Kayser & Florian Sahling, 2023. "Relocatable modular capacities in risk aware strategic supply network planning under demand uncertainty," Schmalenbach Journal of Business Research, Springer, vol. 75(1), pages 1-35, March.
    5. Van den Broeke, Maud & Boute, Robert & Cardoen, Brecht & Samii, Behzad, 2017. "An efficient solution method to design the cost-minimizing platform portfolio," European Journal of Operational Research, Elsevier, vol. 259(1), pages 236-250.
    6. Sahling, Florian & Kayser, Ariane, 2016. "Strategic supply network planning with vendor selection under consideration of risk and demand uncertainty," Omega, Elsevier, vol. 59(PB), pages 201-214.
    7. Cortinhal, M. J. & Lopes, M. J. & Melo, M. T., 2014. "Redesigning a three-echelon logistics network over multiple time periods with transportation mode selection and outsourcing opportunities," Technical Reports on Logistics of the Saarland Business School 7, Saarland University of Applied Sciences (htw saar), Saarland Business School.
    8. Vié, Marie-Sklaerder & Zufferey, Nicolas & Cordeau, Jean-François, 2019. "Solving the Wire-Harness Design Problem at a European car manufacturer," European Journal of Operational Research, Elsevier, vol. 272(2), pages 712-724.
    9. Yang, Dong & Jiao, Jianxin (Roger) & Ji, Yangjian & Du, Gang & Helo, Petri & Valente, Anna, 2015. "Joint optimization for coordinated configuration of product families and supply chains by a leader-follower Stackelberg game," European Journal of Operational Research, Elsevier, vol. 246(1), pages 263-280.
    10. Bertrand Baud-Lavigne & Samuel Bassetto & Bruno Agard, 2016. "A method for a robust optimization of joint product and supply chain design," Journal of Intelligent Manufacturing, Springer, vol. 27(4), pages 741-749, August.
    11. Imane Ballouki & Mohammed Douimi & Latifa Ouzizi, 2018. "Decision Support Tool Selection for Eco-Design Integration into the Simultaneous Design of Product and its Supply Chain," Journal of Environmental Assessment Policy and Management (JEAPM), World Scientific Publishing Co. Pte. Ltd., vol. 20(02), pages 1-32, June.
    12. Melo, M.T. & Nickel, S. & Saldanha-da-Gama, F., 2012. "A tabu search heuristic for redesigning a multi-echelon supply chain network over a planning horizon," International Journal of Production Economics, Elsevier, vol. 136(1), pages 218-230.
    13. Agard, Bruno & Penz, Bernard, 2009. "A simulated annealing method based on a clustering approach to determine bills of materials for a large product family," International Journal of Production Economics, Elsevier, vol. 117(2), pages 389-401, February.
    14. Salema, Maria Isabel Gomes & Barbosa-Povoa, Ana Paula & Novais, Augusto Q., 2010. "Simultaneous design and planning of supply chains with reverse flows: A generic modelling framework," European Journal of Operational Research, Elsevier, vol. 203(2), pages 336-349, June.
    15. Menezes, Mozart B.C. & Ruiz-Hernández, Diego & Guimaraes, Renato, 2016. "The component commonality problem in a real multidimensional space: An algorithmic approach," European Journal of Operational Research, Elsevier, vol. 249(1), pages 105-116.
    16. Thanh, Phuong Nga & Bostel, Nathalie & Péton, Olivier, 2012. "A DC programming heuristic applied to the logistics network design problem," International Journal of Production Economics, Elsevier, vol. 135(1), pages 94-105.
    17. Katoozian, Hoora & Zanjani, Masoumeh Kazemi, 2022. "Supply network design for mass personalization in Industry 4.0 era," International Journal of Production Economics, Elsevier, vol. 244(C).
    18. Thyssen, Jesper & Israelsen, Poul & Jorgensen, Brian, 2006. "Activity-based costing as a method for assessing the economics of modularization--A case study and beyond," International Journal of Production Economics, Elsevier, vol. 103(1), pages 252-270, September.
    19. M. Fattahi & M. Mahootchi & S. M. Moattar Husseini, 2016. "Integrated strategic and tactical supply chain planning with price-sensitive demands," Annals of Operations Research, Springer, vol. 242(2), pages 423-456, July.
    20. Ghanei, Shima & Contreras, Ivan & Cordeau, Jean-François, 2023. "A two-stage stochastic collaborative intertwined supply network design problem under multiple disruptions," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 170(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:proeco:v:174:y:2016:i:c:p:111-118. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/ijpe .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.