IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v253y2022ics0360544222010891.html
   My bibliography  Save this article

Synthesis of nano-hybrid polymethacrylate-carbon dots as pour point depressant and combined with ethylene-vinyl acetate resin to improve the cold flow properties of diesel fuels

Author

Listed:
  • Zhang, Xiaokang
  • Li, Nana
  • Wei, Zhong
  • Han, Sheng
  • Dai, Bin
  • Lin, Hualin

Abstract

The application of nanoparticles in terms of improving the cold flow properties of diesel fuels attracted more and more attention, and the composite technology of pour point depressant could further improve the cold flow properties of diesel fuels. A new type of nano-hybrid pour point depressant (PPD) was created in this study by copolymerising surface-modified carbon dots with tetradecyl methacrylate, which demonstrated good cold flow properties for diesel fuels (ΔSP = 21 °C, ΔCFPP = 9 °C). Besides, the ethylene-vinyl acetate (EVA) resin was also tested as a novel class of PPD to improve the cold flow properties of diesel fuels and exhibited excellent effect (ΔCFPP = 13 °C) on reducing the cold filter plugging point of diesel fuels. Thus, the combined technology of these two type of PPDs was used to further improve the cold flow properties of diesel fuels. The results indicated that the composite PPDs showed a great decrease in both solid point and cold filter plugging point of diesel fuels at a dose of 1500 ppm (ΔSP = 30 °C, ΔCFPP = 20 °C), which indicates better performance than achieved by either of them alone. In addition, polynomial and quadratic function fitting models are established to describe how the two main factors affect the cold flow properties of diesel fuels, and the fitting effects are well. In the end, using a differential scanning calorimeter, polarised optical microscope and rheological analysis, the paraffin crystallisation and morphology of wax crystals for diesel fuels before and after treatment with PPDs were studied, and the mechanism of heterogeneous nucleation and crystallisation of paraffin induced by PPD was proposed to explain the effects of nano-hybrid PPD, EVA resin and combined PPDs.

Suggested Citation

  • Zhang, Xiaokang & Li, Nana & Wei, Zhong & Han, Sheng & Dai, Bin & Lin, Hualin, 2022. "Synthesis of nano-hybrid polymethacrylate-carbon dots as pour point depressant and combined with ethylene-vinyl acetate resin to improve the cold flow properties of diesel fuels," Energy, Elsevier, vol. 253(C).
  • Handle: RePEc:eee:energy:v:253:y:2022:i:c:s0360544222010891
    DOI: 10.1016/j.energy.2022.124186
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544222010891
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.energy.2022.124186?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Mohanan, Athira & Bouzidi, Laziz & Narine, Suresh S., 2017. "Harnessing the synergies between lipid-based crystallization modifiers and a polymer pour point depressant to improve pour point of biodiesel," Energy, Elsevier, vol. 120(C), pages 895-906.
    2. Mohanan, Athira & Bouzidi, Laziz & Li, Shaojun & Narine, Suresh S., 2016. "Mitigating crystallization of saturated fames in biodiesel: 1. Lowering crystallization temperatures via addition of metathesized soybean oil," Energy, Elsevier, vol. 96(C), pages 335-345.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Ilya Bogdanov & Yana Morozova & Andrey Altynov & Alina Titaeva & Maria Kirgina, 2024. "Ways to Improve the Effectiveness of Depressant Additives for the Production of Winter and Arctic Diesel Fuels," Resources, MDPI, vol. 13(2), pages 1-19, February.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Stefan Ptak & Wojciech Krasodomski & Magdalena Żółty, 2022. "Improvement in Low-Temperature Properties of Fatty Acid Methyl Esters," Energies, MDPI, vol. 15(13), pages 1-12, June.
    2. Ni, Zihao & Zhai, Yuling & Li, Fashe & Wang, Hua & Yang, Kai & Wang, Bican & Chen, Yu, 2020. "Reaction kinetics analysis of branched-chain alkyl esters of palmitic acid and cold flow properties," Renewable Energy, Elsevier, vol. 147(P1), pages 719-729.
    3. Mohanan, Athira & Bouzidi, Laziz & Narine, Suresh S., 2016. "Mitigating crystallization of saturated FAMEs in biodiesel 6: The binary phase behavior of 1, 2-dioleoyl-3-stearoyl sn-glycerol – Methyl stearate," Energy, Elsevier, vol. 100(C), pages 273-284.
    4. Lawan, Ibrahim & Zhou, Weiming & Garba, Zaharaddeen Nasiru & Zhang, Mingxin & Yuan, Zhanhui & Chen, Lihui, 2019. "Critical insights into the effects of bio-based additives on biodiesels properties," Renewable and Sustainable Energy Reviews, Elsevier, vol. 102(C), pages 83-95.
    5. Mohanan, Athira & Bouzidi, Laziz & Narine, Suresh S., 2017. "Harnessing the synergies between lipid-based crystallization modifiers and a polymer pour point depressant to improve pour point of biodiesel," Energy, Elsevier, vol. 120(C), pages 895-906.
    6. Sierra-Cantor, Jonathan Fabián & Guerrero-Fajardo, Carlos Alberto, 2017. "Methods for improving the cold flow properties of biodiesel with high saturated fatty acids content: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 72(C), pages 774-790.
    7. Jiang, Zhengwei & Gan, Yunhua & Ju, Yiguang & Liang, Jialin & Zhou, Yi, 2019. "Experimental study on the electrospray and combustion characteristics of biodiesel-ethanol blends in a meso-scale combustor," Energy, Elsevier, vol. 179(C), pages 843-849.
    8. Ren, Feihe & Lu, Yilin & Sun, Bin & Wang, Chenchen & Yan, Jincan & Lin, Hualin & Xue, Yuan & Han, Sheng, 2022. "Structure regulation and influence of comb copolymers as pour point depressants on low temperature fluidity of diesel fuel," Energy, Elsevier, vol. 254(PC).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:253:y:2022:i:c:s0360544222010891. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.