IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v155y2018icp152-161.html
   My bibliography  Save this article

Investigation of n-dodecane pyrolysis at various pressures and the development of a comprehensive combustion model

Author

Listed:
  • Zeng, Meirong
  • Yuan, Wenhao
  • Li, Wei
  • Zhang, Yan
  • Wang, Yizun

Abstract

n-Dodecane combustion was investigated experimentally and numerically in present study. Pyrolysis experiments of n-dodecane at pressures of 0.0066, 0.039, 0.197 and 1 atm, temperatures from 750 to 1430 K were studied in a flow reactor. Mole fractions of n-dodecane, argon and pyrolysis products (including active radicals) were evaluated. A kinetic model of n-dodecane was developed by validating both present and literature reported experiments. The rate of production analysis reveals H-abstraction and CC bond fission reactions are main consumption pathways of n-dodecane. The β-CC scission reactions of alkyls contribute to the formation of alkenes, which are mainly consumed via the allylic CC fission reactions. As a soot precursor, benzene is largely produced from the recombination of C3 species. Moreover, effects of carbon chain length on flow reactor pyrolysis were investigated for n-decane, n-dodecane and n-tetradecane. The decay of n-tetradecane is the fastest, followed by n-dodecane and n-decane, indicating that the pyrolysis reactivity of n-alkanes increases as the carbon chain length increases from C10 to C14n-alkanes. Ignition delay times and laminar burning velocities (LBVs) of n-alkanes under similar conditions were also compared, the result shows that effects of the carbon chain length on ignition delay times and LBVs are slight.

Suggested Citation

  • Zeng, Meirong & Yuan, Wenhao & Li, Wei & Zhang, Yan & Wang, Yizun, 2018. "Investigation of n-dodecane pyrolysis at various pressures and the development of a comprehensive combustion model," Energy, Elsevier, vol. 155(C), pages 152-161.
    • Handle: RePEc:eee:energy:v:155:y:2018:i:c:p:152-161
    DOI: 10.1016/j.energy.2018.04.177
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544218308004
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2018.04.177?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Liu, Xinlei & Wang, Hu & Wang, Xiaofeng & Zheng, Zunqing & Yao, Mingfa, 2017. "Experimental and modelling investigations of the diesel surrogate fuels in direct injection compression ignition combustion," Applied Energy, Elsevier, vol. 189(C), pages 187-200.
    2. Chen, Longfei & Ding, Shirun & Liu, Haoye & Lu, Yiji & Li, Yanfei & Roskilly, Anthony Paul, 2017. "Comparative study of combustion and emissions of kerosene (RP-3), kerosene-pentanol blends and diesel in a compression ignition engine," Applied Energy, Elsevier, vol. 203(C), pages 91-100.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Li, Xin & Zhang, Silong & Ye, Mai & Qin, Jiang & Bao, Wen & Cui, Naigang & Liu, Xiaoyong & Zhou, Chaoying, 2020. "Effect of enhanced heat transfer structures on the chemical recuperation process of advanced aero-engine," Energy, Elsevier, vol. 211(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Xu, Leilei & Bai, Xue-Song & Li, Changle & Tunestål, Per & Tunér, Martin & Lu, Xingcai, 2019. "Combustion characteristics of gasoline DICI engine in the transition from HCCI to PPC: Experiment and numerical analysis," Energy, Elsevier, vol. 185(C), pages 922-937.
    2. Shi, Zhicheng & Lee, Chia-fon & Wu, Han & Wu, Yang & Zhang, Lu & Liu, Fushui, 2019. "Optical diagnostics of low-temperature ignition and combustion characteristics of diesel/kerosene blends under cold-start conditions," Applied Energy, Elsevier, vol. 251(C), pages 1-1.
    3. Giancarlo Chiatti & Ornella Chiavola & Fulvio Palmieri, 2019. "Impact on Combustion and Emissions of Jet Fuel as Additive in Diesel Engine Fueled with Blends of Petrol Diesel, Renewable Diesel and Waste Cooking Oil Biodiesel," Energies, MDPI, vol. 12(13), pages 1-14, June.
    4. Wang, Chenyao & Zhang, Fujun & Wang, Enhua & Yu, Chuncun & Gao, Hongli & Liu, Bolan & Zhao, Zhenfeng & Zhao, Changlu, 2019. "Experimental study on knock suppression of spark-ignition engine fuelled with kerosene via water injection," Applied Energy, Elsevier, vol. 242(C), pages 248-259.
    5. Liu, Guibin & Ruan, Can & Li, Zilong & Huang, Guan & Zhou, Qiyan & Qian, Yong & Lu, Xingcai, 2020. "Investigation of engine performance for alcohol/kerosene blends as in spark-ignition aviation piston engine," Applied Energy, Elsevier, vol. 268(C).
    6. Liang, Zhirong & Yu, Zhenhong & Liu, Haoye & Chen, Longfei & Huang, Xinyan, 2022. "Combustion and emission characteristics of a compression ignition engine burning a wide range of conventional hydrocarbon and alternative fuels," Energy, Elsevier, vol. 250(C).
    7. Zhang, Qiankun & Xia, Jin & He, Zhuoyao & Wang, Jianping & Liu, Rui & Zheng, Liang & Qian, Yong & Ju, Dehao & Lu, Xingcai, 2021. "Experimental study on spray characteristics of six-component diesel surrogate fuel under sub/trans/supercritical conditions with different injection pressures," Energy, Elsevier, vol. 218(C).
    8. Lu, Yiji & Roskilly, Anthony Paul & Yu, Xiaoli & Jiang, Long & Chen, Longfei, 2018. "Technical feasibility study of scroll-type rotary gasoline engine: A compact and efficient small-scale Humphrey cycle engine," Applied Energy, Elsevier, vol. 221(C), pages 67-74.
    9. Raza, Mohsin & Wang, Hu & Yao, Mingfa, 2019. "Numerical investigation of reactivity controlled compression ignition (RCCI) using different multi-component surrogate combinations of diesel and gasoline," Applied Energy, Elsevier, vol. 242(C), pages 462-479.
    10. Sun, Xiuxiu & Liang, Xingyu & Shu, Gequn & Yu, Hanzhengnan & Liu, Hai, 2019. "Development of surrogate fuels for heavy fuel oil in marine engine," Energy, Elsevier, vol. 185(C), pages 961-970.
    11. Xiaoyang Guo & Erjiang Hu & Xiaotian Li & Geyuan Yin & Zuohua Huang, 2021. "Experimental Study on Ignition Characteristics of RP-3 Jet Fuel Using Nanosecond Pulsed Plasma Discharge," Energies, MDPI, vol. 14(20), pages 1-13, October.
    12. Ornella Chiavola & Fulvio Palmieri & Domenico Mario Cavallo, 2023. "On the Increase in the Renewable Fraction in Diesel Blends using Aviation Fuel in a Common Rail Engine," Energies, MDPI, vol. 16(12), pages 1-16, June.
    13. Huang, Haozhong & Lv, Delin & Chen, Yingjie & Zhu, Jizhen & Zhu, Zhaojun & Pan, Mingzhang & Chen, Yajuan & Teng, Wenwen, 2019. "Development and validation of a reduced multi-component mechanism for diesel engine application," Applied Energy, Elsevier, vol. 254(C).
    14. Wang, Lei & Zhao, Zhenfeng & Yu, Chuncun & Cui, Huasheng, 2022. "Experimental study of aviation kerosene engine with PJI system," Energy, Elsevier, vol. 248(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:155:y:2018:i:c:p:152-161. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.