IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v152y2018icp858-865.html
   My bibliography  Save this article

Thermal performance evaluation of production technologies for non-centrifuged sugar for improvement in energy utilization

Author

Listed:
  • Jader, Rodríguez
  • Fabián, Velásquez
  • John, Espitia
  • Sebastián, Escobar
  • Oscar, Mendieta

Abstract

Non-centrifuged sugar (NCS) is produced through the evaporation of water from sugarcane juice, using the thermal energy released from the combustion of sugarcane bagasse. The energy efficiency of the process varies significantly according to the technology implemented in evaporation and combustion operations. Therefore, energy optimization usage becomes essential for the improvement of the equipment, as well as the appropriate development of the manufacturing process. The aim of this study was to evaluate seven groups of technologies related to bagasse combustion and heat exchange systems, used in the production of NCS. The evaluation was performed based on five parameters: overall thermal efficiency (η), energy consumption (MJ)/NCS (kg), O2, CO2 and CO emission indices at the exit of the process, flue gases/NCS (kg/kg), and air-fuel ratio (AFR). Each group of technologies evaluated had a significant effect on the parameters considered. However, the best results were shown by the technologies where steam was used in closed systems, obtaining an overall thermal efficiency of 63.63 ± 5.17%, with a significant decrease in fuel consumption and lower gas emissions.

Suggested Citation

  • Jader, Rodríguez & Fabián, Velásquez & John, Espitia & Sebastián, Escobar & Oscar, Mendieta, 2018. "Thermal performance evaluation of production technologies for non-centrifuged sugar for improvement in energy utilization," Energy, Elsevier, vol. 152(C), pages 858-865.
  • Handle: RePEc:eee:energy:v:152:y:2018:i:c:p:858-865
    DOI: 10.1016/j.energy.2018.03.127
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S036054421830536X
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.energy.2018.03.127?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Sardeshpande, Vishal R. & Shendage, D.J. & Pillai, Indu R., 2010. "Thermal performance evaluation of a four pan jaggery processing furnace for improvement in energy utilization," Energy, Elsevier, vol. 35(12), pages 4740-4747.
    2. Kaya, Durmus & Ibrahim Sarac, H., 2007. "Mathematical modeling of multiple-effect evaporators and energy economy," Energy, Elsevier, vol. 32(8), pages 1536-1542.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Ahmetović, Elvis & Ibrić, Nidret & Kravanja, Zdravko & Grossmann, Ignacio E. & Maréchal, François & Čuček, Lidija & Kermani, Maziar, 2018. "Simultaneous optimisation and heat integration of evaporation systems including mechanical vapour recompression and background process," Energy, Elsevier, vol. 158(C), pages 1160-1191.
    2. Khanam, Shabina & Mohanty, Bikash, 2010. "Energy reduction schemes for multiple effect evaporator systems," Applied Energy, Elsevier, vol. 87(4), pages 1102-1111, April.
    3. Kumar, Rakesh & Kumar, Mahesh, 2018. "Upgradation of jaggery production and preservation technologies," Renewable and Sustainable Energy Reviews, Elsevier, vol. 96(C), pages 167-180.
    4. Sharan, Prashant & Bandyopadhyay, Santanu, 2016. "Energy optimization in parallel/cross feed multiple-effect evaporator based desalination system," Energy, Elsevier, vol. 111(C), pages 756-767.
    5. Om Prakash Verma & Toufiq Haji Mohammed & Shubham Mangal & Gaurav Manik, 2018. "Optimization of steam economy and consumption of heptad’s effect evaporator system in Kraft recovery process," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 9(1), pages 111-130, February.
    6. Verma, Om Prakash & Manik, Gaurav & Sethi, Sushant Kumar, 2019. "A comprehensive review of renewable energy source on energy optimization of black liquor in MSE using steady and dynamic state modeling, simulation and control," Renewable and Sustainable Energy Reviews, Elsevier, vol. 100(C), pages 90-109.
    7. Ranjan Chaudhary & Avadhesh Yadav, 2021. "Experimental investigation of solar cooking system based on evacuated tube solar collector for the preparation of concentrated sugarcane juice used in jaggery making," Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development, Springer, vol. 23(1), pages 647-663, January.
    8. Verma, Om Prakash & Mohammed, Toufiq Haji & Mangal, Shubham & Manik, Gaurav, 2017. "Minimization of energy consumption in multi-stage evaporator system of Kraft recovery process using Interior-Point Method," Energy, Elsevier, vol. 129(C), pages 148-157.
    9. Sogut, Z. & Ilten, N. & Oktay, Z., 2010. "Energetic and exergetic performance evaluation of the quadruple-effect evaporator unit in tomato paste production," Energy, Elsevier, vol. 35(9), pages 3821-3826.
    10. Pati, Smitarani & Verma, Om Prakash, 2022. "Energy integration of solar assisted Multiple Stage Evaporator and optimum parameter selection," Energy, Elsevier, vol. 239(PC).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:152:y:2018:i:c:p:858-865. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.