IDEAS home Printed from https://ideas.repec.org/a/eee/ejores/v237y2014i1p177-195.html
   My bibliography  Save this article

Modeling sequence scrambling and related phenomena in mixed-model production lines

Author

Listed:
  • Rudolf, Gábor
  • Noyan, Nilay
  • Giard, Vincent

Abstract

In this paper we examine the various effects that workstations and rework loops with identical parallel processors and stochastic processing times have on the performance of a mixed-model production line. Of particular interest are issues related to sequence scrambling. In many production systems (especially those operating on just-in-time or in-line vehicle sequencing principles), the sequence of orders is selected carefully to optimize line efficiency while taking into account various line balancing and product spacing constraints. However, this sequence is often altered due to stochastic factors during production. This leads to significant economic consequences, due to either the degraded performance of the production line, or the added cost of restoring the sequence (via the use of systems such as mix banks or automated storage and retrieval systems). We develop analytical formulas to quantify both the extent of sequence scrambling caused by a station of the production line, and the effects of this scrambling on downstream performance. We also develop a detailed Markov chain model to analyze related issues regarding line stoppages and throughput. We demonstrate the usefulness of our methods on a range of illustrative numerical examples, and discuss the implications from a managerial point of view.

Suggested Citation

  • Rudolf, Gábor & Noyan, Nilay & Giard, Vincent, 2014. "Modeling sequence scrambling and related phenomena in mixed-model production lines," European Journal of Operational Research, Elsevier, vol. 237(1), pages 177-195.
    • Handle: RePEc:eee:ejores:v:237:y:2014:i:1:p:177-195
    DOI: 10.1016/j.ejor.2014.02.041
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0377221714001763
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ejor.2014.02.041?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Giard, Vincent & Jeunet, Jully, 2010. "Optimal sequencing of mixed models with sequence-dependent setups and utility workers on an assembly line," International Journal of Production Economics, Elsevier, vol. 123(2), pages 290-300, February.
    2. Alford, Dave & Sackett, Peter & Nelder, Geoff, 2000. "Mass customisation -- an automotive perspective," International Journal of Production Economics, Elsevier, vol. 65(1), pages 99-110, April.
    3. repec:dau:papers:123456789/2861 is not listed on IDEAS
    4. Xiaobo, Zhao & Xu, Deju & Zhang, Hanqin & He, Qi-Ming, 2007. "Modeling and analysis of a supply-assembly-store chain," European Journal of Operational Research, Elsevier, vol. 176(1), pages 275-294, January.
    5. Boysen, Nils & Fliedner, Malte & Scholl, Armin, 2009. "Sequencing mixed-model assembly lines: Survey, classification and model critique," European Journal of Operational Research, Elsevier, vol. 192(2), pages 349-373, January.
    6. Roodbergen, Kees Jan & Vis, Iris F.A., 2009. "A survey of literature on automated storage and retrieval systems," European Journal of Operational Research, Elsevier, vol. 194(2), pages 343-362, April.
    7. repec:dau:papers:123456789/352 is not listed on IDEAS
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Maximilian Stauder & Niklas Kühl, 2022. "AI for in-line vehicle sequence controlling: development and evaluation of an adaptive machine learning artifact to predict sequence deviations in a mixed-model production line," Flexible Services and Manufacturing Journal, Springer, vol. 34(3), pages 709-747, September.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Boysen, Nils & Emde, Simon & Hoeck, Michael & Kauderer, Markus, 2015. "Part logistics in the automotive industry: Decision problems, literature review and research agenda," European Journal of Operational Research, Elsevier, vol. 242(1), pages 107-120.
    2. Florian Jaehn & Sergey Kovalev & Mikhail Y. Kovalyov & Erwin Pesch, 2014. "Multiproduct batching and scheduling with buffered rework: The case of a car paint shop," Naval Research Logistics (NRL), John Wiley & Sons, vol. 61(6), pages 458-471, September.
    3. Ramírez Palencia, Alberto E. & Mejía Delgadillo, Gonzalo E., 2012. "A computer application for a bus body assembly line using Genetic Algorithms," International Journal of Production Economics, Elsevier, vol. 140(1), pages 431-438.
    4. Maximilian Stauder & Niklas Kühl, 2022. "AI for in-line vehicle sequence controlling: development and evaluation of an adaptive machine learning artifact to predict sequence deviations in a mixed-model production line," Flexible Services and Manufacturing Journal, Springer, vol. 34(3), pages 709-747, September.
    5. Staeblein, Thomas & Aoki, Katsuki, 2015. "Planning and scheduling in the automotive industry: A comparison of industrial practice at German and Japanese makers," International Journal of Production Economics, Elsevier, vol. 162(C), pages 258-272.
    6. Polten, Lukas & Emde, Simon, 2022. "Multi-shuttle crane scheduling in automated storage and retrieval systems," European Journal of Operational Research, Elsevier, vol. 302(3), pages 892-908.
    7. Gianluca Nastasi & Valentina Colla & Silvia Cateni & Simone Campigli, 2018. "Implementation and comparison of algorithms for multi-objective optimization based on genetic algorithms applied to the management of an automated warehouse," Journal of Intelligent Manufacturing, Springer, vol. 29(7), pages 1545-1557, October.
    8. Bautista, Joaquín & Alfaro, Rocío & Batalla, Cristina, 2015. "Modeling and solving the mixed-model sequencing problem to improve productivity," International Journal of Production Economics, Elsevier, vol. 161(C), pages 83-95.
    9. Daniela D. Viana & Iris D. Tommelein & Carlos T. Formoso, 2017. "Using Modularity to Reduce Complexity of Industrialized Building Systems for Mass Customization," Energies, MDPI, vol. 10(10), pages 1-17, October.
    10. repec:pcz:journl:v:5:y:2011:i:1:p:119-126 is not listed on IDEAS
    11. Golle, Uli & Rothlauf, Franz & Boysen, Nils, 2014. "Car sequencing versus mixed-model sequencing: A computational study," European Journal of Operational Research, Elsevier, vol. 237(1), pages 50-61.
    12. Claeys, Dieter & Adan, Ivo & Boxma, Onno, 2016. "Stochastic bounds for order flow times in parts-to-picker warehouses with remotely located order-picking workstations," European Journal of Operational Research, Elsevier, vol. 254(3), pages 895-906.
    13. Ioanna Makarouni & John Psarras & Eleftherios Siskos, 2015. "Interactive bicriterion decision support for a large scale industrial scheduling system," Annals of Operations Research, Springer, vol. 227(1), pages 45-61, April.
    14. Wenquan Dong & Mingzhou Jin & Yanyan Wang & Peter Kelle, 2021. "Retrieval scheduling in crane-based 3D automated retrieval and storage systems with shuttles," Annals of Operations Research, Springer, vol. 302(1), pages 111-135, July.
    15. Nils Boysen & David Füßler & Konrad Stephan, 2020. "See the light: Optimization of put‐to‐light order picking systems," Naval Research Logistics (NRL), John Wiley & Sons, vol. 67(1), pages 3-20, February.
    16. Boysen, Nils & Scholl, Armin & Wopperer, Nico, 2012. "Resequencing of mixed-model assembly lines: Survey and research agenda," European Journal of Operational Research, Elsevier, vol. 216(3), pages 594-604.
    17. Riccardo Manzini & Riccardo Accorsi & Giulia Baruffaldi & Teresa Cennerazzo & Mauro Gamberi, 2016. "Travel time models for deep-lane unit-load autonomous vehicle storage and retrieval system (AVS/RS)," International Journal of Production Research, Taylor & Francis Journals, vol. 54(14), pages 4286-4304, July.
    18. Li, Xiaowei & Hua, Guowei & Huang, Anqiang & Sheu, Jiuh-Biing & Cheng, T.C.E. & Huang, Fengquan, 2020. "Storage assignment policy with awareness of energy consumption in the Kiva mobile fulfilment system," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 144(C).
    19. H Aigbedo, 2009. "A note on parts inventory and mass customization for a two-stage JIT supply chain with zero-one type of bills of materials," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 60(9), pages 1286-1291, September.
    20. Dukic, Goran & Opetuk, Tihomir & Lerher, Tone, 2015. "A throughput model for a dual-tray Vertical Lift Module with a human order-picker," International Journal of Production Economics, Elsevier, vol. 170(PC), pages 874-881.
    21. Mason, Robert & Lalwani, Chandra, 2008. "Mass customised distribution," International Journal of Production Economics, Elsevier, vol. 114(1), pages 71-83, July.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:ejores:v:237:y:2014:i:1:p:177-195. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/eor .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.