IDEAS home Printed from https://ideas.repec.org/a/eee/ejores/v226y2013i3p491-499.html
   My bibliography  Save this article

Economic and economic-statistical designs of an X¯ control chart for two-unit series systems with condition-based maintenance

Author

Listed:
  • Liu, Liping
  • Yu, Miaomiao
  • Ma, Yizhong
  • Tu, Yiliu

Abstract

The economic and economic-statistical designs of an X¯ control chart for two-identical unit series systems with condition-based maintenance is studied in this paper. This system is described using a five-state continuous time Markov chain. We assume that the system is monitored by an X¯ control chart to avoid costly failures. When the control chart gives an out-of-control signal, a full inspection will be conducted to confirm the actual system condition. Moreover, we assume that the system unit can be preventively replaced at a sampling epoch and must be replaced upon failure; the cost of preventive replacement is less than that of failure replacement. In addition, a random shift size is considered for two types of design. Based on these assumptions and by using renewal theory, optimization models have been developed to find the optimal control chart parameters for minimizing the average maintenance costs. A numerical example is presented to compare the two control chart designs. We also consider the effect of each statistical constraint on the decision variables and on the expected cost.

Suggested Citation

  • Liu, Liping & Yu, Miaomiao & Ma, Yizhong & Tu, Yiliu, 2013. "Economic and economic-statistical designs of an X¯ control chart for two-unit series systems with condition-based maintenance," European Journal of Operational Research, Elsevier, vol. 226(3), pages 491-499.
    • Handle: RePEc:eee:ejores:v:226:y:2013:i:3:p:491-499
    DOI: 10.1016/j.ejor.2012.11.031
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0377221712008831
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ejor.2012.11.031?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Linderman, Kevin & McKone-Sweet, Kathleen E. & Anderson, John C., 2005. "An integrated systems approach to process control and maintenance," European Journal of Operational Research, Elsevier, vol. 164(2), pages 324-340, July.
    2. Wu, Jianmou & Makis, Viliam, 2008. "Economic and economic-statistical design of a chi-square chart for CBM," European Journal of Operational Research, Elsevier, vol. 188(2), pages 516-529, July.
    3. Wu, Zhang & Shamsuzzaman, M. & Wang, Qinan, 2007. "The cost minimization and manpower deployment to SPC in a multistage manufacturing system," International Journal of Production Economics, Elsevier, vol. 106(1), pages 275-287, March.
    4. Celano, Giovanni & De Magalhães, Maysa S. & Costa, Antonio F.B. & Fichera, Sergio, 2011. "A stochastic shift model for economically designed charts constrained by the process stage configuration," International Journal of Production Economics, Elsevier, vol. 132(2), pages 315-325, August.
    5. Kuo, Yarlin, 2006. "Optimal adaptive control policy for joint machine maintenance and product quality control," European Journal of Operational Research, Elsevier, vol. 171(2), pages 586-597, June.
    6. Wang, Wenbin, 2012. "A simulation-based multivariate Bayesian control chart for real time condition-based maintenance of complex systems," European Journal of Operational Research, Elsevier, vol. 218(3), pages 726-734.
    7. Panagiotidou, Sofia & Nenes, George, 2009. "An economically designed, integrated quality and maintenance model using an adaptive Shewhart chart," Reliability Engineering and System Safety, Elsevier, vol. 94(3), pages 732-741.
    8. Wenbin Wang, 2008. "Condition-based Maintenance Modelling," Springer Series in Reliability Engineering, in: Complex System Maintenance Handbook, chapter 5, pages 111-131, Springer.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Song, Zhi & Mukherjee, Amitava & Liu, Yanchun & Zhang, Jiujun, 2019. "Optimizing joint location-scale monitoring – An adaptive distribution-free approach with minimal loss of information," European Journal of Operational Research, Elsevier, vol. 274(3), pages 1019-1036.
    2. Yeong, Wai Chung & Khoo, Michael B.C. & Lee, Ming Ha & Rahim, M.A., 2013. "Economic and economic statistical designs of the synthetic X¯ chart using loss functions," European Journal of Operational Research, Elsevier, vol. 228(3), pages 571-581.
    3. Do, Phuc & Assaf, Roy & Scarf, Phil & Iung, Benoit, 2019. "Modelling and application of condition-based maintenance for a two-component system with stochastic and economic dependencies," Reliability Engineering and System Safety, Elsevier, vol. 182(C), pages 86-97.
    4. Yin, Hui & Zhang, Guojun & Zhu, Haiping & Deng, Yuhao & He, Fei, 2015. "An integrated model of statistical process control and maintenance based on the delayed monitoring," Reliability Engineering and System Safety, Elsevier, vol. 133(C), pages 323-333.
    5. Liping Liu & Lining Jiang & Ding Zhang, 2017. "An integrated model of statistical process control and condition-based maintenance for deteriorating systems," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 68(11), pages 1452-1460, November.
    6. Moura Neto, F. & Souza, P. & de Magalhães, M.S., 2019. "Determining baseline profile by diffusion maps," European Journal of Operational Research, Elsevier, vol. 279(1), pages 107-123.
    7. Amir Ahmadi-Javid & Mohsen Ebadi, 2017. "Economic Design of Memory-Type Control Charts: The Fallacy of the Formula Proposed by Lorenzen and Vance (1986)," Papers 1708.06160, arXiv.org.
    8. Rajesh Saha & Abdullahil Azeem & Kazi Wahadul Hasan & Syed Mithun Ali & Sanjoy Kumar Paul, 2021. "Integrated economic design of quality control and maintenance management: Implications for managing manufacturing process," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 12(2), pages 263-280, April.
    9. Zhou, Wenhui & Zheng, Zhibin & Xie, Wei, 2017. "A control-chart-based queueing approach for service facility maintenance with energy-delay tradeoff," European Journal of Operational Research, Elsevier, vol. 261(2), pages 613-625.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Xiang, Yisha, 2013. "Joint optimization of X¯ control chart and preventive maintenance policies: A discrete-time Markov chain approach," European Journal of Operational Research, Elsevier, vol. 229(2), pages 382-390.
    2. Zhou, Wenhui & Zheng, Zhibin & Xie, Wei, 2017. "A control-chart-based queueing approach for service facility maintenance with energy-delay tradeoff," European Journal of Operational Research, Elsevier, vol. 261(2), pages 613-625.
    3. Yin, Hui & Zhang, Guojun & Zhu, Haiping & Deng, Yuhao & He, Fei, 2015. "An integrated model of statistical process control and maintenance based on the delayed monitoring," Reliability Engineering and System Safety, Elsevier, vol. 133(C), pages 323-333.
    4. Liping Liu & Lining Jiang & Ding Zhang, 2017. "An integrated model of statistical process control and condition-based maintenance for deteriorating systems," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 68(11), pages 1452-1460, November.
    5. Ho, Linda Lee & Quinino, Roberto C., 2012. "Integrating on-line process control and imperfect corrective maintenance: An economical design," European Journal of Operational Research, Elsevier, vol. 222(2), pages 253-262.
    6. Panagiotidou, S. & Tagaras, G., 2012. "Optimal integrated process control and maintenance under general deterioration," Reliability Engineering and System Safety, Elsevier, vol. 104(C), pages 58-70.
    7. Huda, Shamsul & Abdollahian, Mali & Mammadov, Musa & Yearwood, John & Ahmed, Shafiq & Sultan, Ibrahim, 2014. "A hybrid wrapper–filter approach to detect the source(s) of out-of-control signals in multivariate manufacturing process," European Journal of Operational Research, Elsevier, vol. 237(3), pages 857-870.
    8. Ali Salmasnia & Mohammadreza Namdar & Mina Abolfathi & Parinaz Ajaly, 2021. "Statistical design of a VSI-EWMA control chart for monitoring the communications among individuals in a weighted social network," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 12(3), pages 495-508, June.
    9. Sandeep Kumar & Bhupesh Kumar Lad, 2017. "Integrated production and maintenance planning for parallel machine system considering cost of rejection," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 68(7), pages 834-846, July.
    10. Franco, Bruno Chaves & Celano, Giovanni & Castagliola, Philippe & Costa, Antonio Fernando Branco, 2014. "Economic design of Shewhart control charts for monitoring autocorrelated data with skip sampling strategies," International Journal of Production Economics, Elsevier, vol. 151(C), pages 121-130.
    11. Berrade, M.D. & Cavalcante, C.A.V. & Scarf, P.A., 2013. "Modelling imperfect inspection over a finite horizon," Reliability Engineering and System Safety, Elsevier, vol. 111(C), pages 18-29.
    12. W Wang, 2011. "Overview of a semi-stochastic filtering approach for residual life estimation with applications in condition based maintenance," Journal of Risk and Reliability, , vol. 225(2), pages 185-197, June.
    13. Chiel van Oosterom & Lisa M. Maillart & Jeffrey P. Kharoufeh, 2017. "Optimal maintenance policies for a safety‐critical system and its deteriorating sensor," Naval Research Logistics (NRL), John Wiley & Sons, vol. 64(5), pages 399-417, August.
    14. Azimpoor, Samareh & Taghipour, Sharareh, 2021. "Joint inspection and product quality optimization for a system with delayed failure," Reliability Engineering and System Safety, Elsevier, vol. 215(C).
    15. Xiang Wu & Kanjian Zhang & Ming Cheng, 2017. "Computational method for optimal machine scheduling problem with maintenance and production," International Journal of Production Research, Taylor & Francis Journals, vol. 55(6), pages 1791-1814, March.
    16. Peruchi, Rogério Santana & Balestrassi, Pedro Paulo & de Paiva, Anderson Paulo & Ferreira, João Roberto & de Santana Carmelossi, Michele, 2013. "A new multivariate gage R&R method for correlated characteristics," International Journal of Production Economics, Elsevier, vol. 144(1), pages 301-315.
    17. Kampitsis, Dimitris & Panagiotidou, Sofia, 2022. "A Bayesian condition-based maintenance and monitoring policy with variable sampling intervals," Reliability Engineering and System Safety, Elsevier, vol. 218(PA).
    18. Öhman, Mikael & Finne, Max & Holmström, Jan, 2015. "Measuring service outcomes for adaptive preventive maintenance," International Journal of Production Economics, Elsevier, vol. 170(PB), pages 457-467.
    19. Roberto Campos Leoni & Marcela Aparecida Guerreiro Machado & Antonio Fernando Branco Costa, 2016. "The T -super-2 chart with mixed samples to control bivariate autocorrelated processes," International Journal of Production Research, Taylor & Francis Journals, vol. 54(11), pages 3294-3310, June.
    20. Hans Buhl & Maximilian Röglinger & Stefan Stöckl & Kathrin Braunwarth, 2011. "Value Orientation in Process Management," Business & Information Systems Engineering: The International Journal of WIRTSCHAFTSINFORMATIK, Springer;Gesellschaft für Informatik e.V. (GI), vol. 3(3), pages 163-172, June.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:ejores:v:226:y:2013:i:3:p:491-499. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/eor .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.