IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v277y2020ics0306261920310722.html
   My bibliography  Save this article

The metal–organic framework UiO-66 with missing-linker defects: A highly active catalyst for carbon dioxide cycloaddition

Author

Listed:
  • Xiang, Wenlong
  • Ren, Jie
  • Chen, Si
  • Shen, Chenyang
  • Chen, Yifei
  • Zhang, Minhua
  • Liu, Chang-jun

Abstract

Metal-organic frameworks (MOFs) have been confirmed to be a promising material for carbon dioxide capture, while the simultaneous capture and conversion of carbon dioxide over the MOF-based catalysts is furthermore being a hot topic. In this work, we demonstrate that the zirconium-based MOF UiO-66 (UiO for University of Oslo) with missing-linker defects is a highly active catalyst for carbon dioxide cycloaddition with an epoxide, which is a reaction with 100% atom economy and broad industrial uses. A facile, rapid, energy-saving and environmentally friendly argon plasma treatment was employed to create the missing-linker defects in UiO-66 without using hazardous chemicals at atmospheric pressure and temperature below 398 K, whereas the bulk structure of UiO-66 remained stable. The energetic argon plasma species decomposed part of the linkers within UiO-66 structure, leaving unsaturated metal sites. The defect concentration in UiO-66 was tuned by changing the plasma bombardment time. After an argon plasma treatment for 30 min, the number of linker deficiencies per Zr6 cluster can reach up to 2.3. The product yield of the UiO-66 with abundant missing-linker defects increased of ca. 43% over the defect-free UiO-66. The crucial role of the missing-linker defects of UiO-66 in the enhancement of the catalytic activity was confirmed. The present study will be helpful for the future preparation of defective MOFs with potential applications not only for carbon dioxide conversion but also for energy storage and conversion.

Suggested Citation

  • Xiang, Wenlong & Ren, Jie & Chen, Si & Shen, Chenyang & Chen, Yifei & Zhang, Minhua & Liu, Chang-jun, 2020. "The metal–organic framework UiO-66 with missing-linker defects: A highly active catalyst for carbon dioxide cycloaddition," Applied Energy, Elsevier, vol. 277(C).
    • Handle: RePEc:eee:appene:v:277:y:2020:i:c:s0306261920310722
    DOI: 10.1016/j.apenergy.2020.115560
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261920310722
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2020.115560?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Qasem, Naef A.A. & Ben-Mansour, Rached, 2018. "Adsorption breakthrough and cycling stability of carbon dioxide separation from CO2/N2/H2O mixture under ambient conditions using 13X and Mg-MOF-74," Applied Energy, Elsevier, vol. 230(C), pages 1093-1107.
    2. Qasem, Naef A.A. & Ben-Mansour, Rached & Habib, Mohamed A., 2018. "An efficient CO2 adsorptive storage using MOF-5 and MOF-177," Applied Energy, Elsevier, vol. 210(C), pages 317-326.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Chen, Shuxian & Dai, Xiaohu & Yang, Donghai & Dai, Lingling & Hua, Yu, 2023. "Enhancing PHA production through metal-organic frameworks: Mechanisms involving superproton transport and bacterial metabolic pathways," Applied Energy, Elsevier, vol. 348(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Majeda Khraisheh & Fares AlMomani & Gavin Walker, 2021. "High Purity/Recovery Separation of Propylene from Propyne Using Anion Pillared Metal-Organic Framework: Application of Vacuum Swing Adsorption (VSA)," Energies, MDPI, vol. 14(3), pages 1-19, January.
    2. Umair Yaqub Qazi, 2022. "Future of Hydrogen as an Alternative Fuel for Next-Generation Industrial Applications; Challenges and Expected Opportunities," Energies, MDPI, vol. 15(13), pages 1-40, June.
    3. Plaza, M.G. & Rubiera, F., 2019. "Evaluation of a novel multibed heat-integrated vacuum and temperature swing adsorption post-combustion CO2 capture process," Applied Energy, Elsevier, vol. 250(C), pages 916-925.
    4. Papakokkinos, Giorgos & Castro, Jesús & López, Joan & Oliva, Assensi, 2019. "A generalized computational model for the simulation of adsorption packed bed reactors – Parametric study of five reactor geometries for cooling applications," Applied Energy, Elsevier, vol. 235(C), pages 409-427.
    5. Wilkes, Mathew Dennis & Brown, Solomon, 2022. "Flexible CO2 capture for open-cycle gas turbines via vacuum-pressure swing adsorption: A model-based assessment," Energy, Elsevier, vol. 250(C).
    6. Lu, Junhui & Cao, Haishan & Li, JunMing, 2020. "Energy and cost estimates for separating and capturing CO2 from CO2/H2O using condensation coupled with pressure/vacuum swing adsorption," Energy, Elsevier, vol. 202(C).
    7. Shen, Yongting & Yang, Hongxing, 2023. "Multi-objective optimization of a CO2/H2O capture-based ventilation and air conditioning system," Applied Energy, Elsevier, vol. 344(C).
    8. Farihahusnah Hussin & Mohamed Kheireddine Aroua & Mohd Azlan Kassim & Umi Fazara Md. Ali, 2021. "Transforming Plastic Waste into Porous Carbon for Capturing Carbon Dioxide: A Review," Energies, MDPI, vol. 14(24), pages 1-22, December.
    9. Nehil Shreyash & Muskan Sonker & Sushant Bajpai & Saurabh Kr Tiwary & Mohd Ashhar Khan & Subham Raj & Tushar Sharma & Susham Biswas, 2021. "The Review of Carbon Capture-Storage Technologies and Developing Fuel Cells for Enhancing Utilization," Energies, MDPI, vol. 14(16), pages 1-34, August.
    10. Qasem, Naef A.A. & Ben-Mansour, Rached, 2018. "Adsorption breakthrough and cycling stability of carbon dioxide separation from CO2/N2/H2O mixture under ambient conditions using 13X and Mg-MOF-74," Applied Energy, Elsevier, vol. 230(C), pages 1093-1107.
    11. Yang, Chuanruo & Du, Zhilin & Jin, Junsu & Chen, Jian & Mi, Jianguo, 2020. "Epoxide-functionalized tetraethylenepentamine encapsulated into porous copolymer spheres for CO2 capture with superior stability," Applied Energy, Elsevier, vol. 260(C).
    12. Cristina Moliner & Simona Focacci & Beatrice Antonucci & Aldo Moreno & Simba Biti & Fazlena Hamzah & Alfonso Martinez-Felipe & Elisabetta Arato & Claudia Fernández Martín, 2022. "Production, Activation and CO 2 Uptake Capacity of a Carbonaceous Microporous Material from Palm Oil Residues," Energies, MDPI, vol. 15(23), pages 1-12, December.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:277:y:2020:i:c:s0306261920310722. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.