IDEAS home Printed from https://ideas.repec.org/a/zib/zbnamm/v5y2022i2p47-51.html
   My bibliography  Save this article

Design, Fabrication And Exhaust Gases Analysis Of Corn Cob Feeding Unit Installed With Steam Boiler

Author

Listed:
  • Muhammad Azhar Ali

    (Department of Food Engineering, University of Agriculture Faisalabad, 38000 Punjab, Pakistan)

  • Abdul Ghani

    (Department of Structures and Environmental engineering, University of Agriculture Faisalabad, 38000 Punjab, Pakistan)

  • Abdul Nasir

    (Department of Structures and Environmental engineering, University of Agriculture Faisalabad, 38000 Punjab, Pakistan)

  • Muhammad Yamin

    (Department of Farm Machinery and Power, University of Agriculture Faisalabad, 38000 Punjab, Pakistan)

  • Muhammad Nadeem

    (Department of Farm Machinery and Power, University of Agriculture Faisalabad, 38000 Punjab, Pakistan)

Abstract

A sustainable approach towards energy production is the need of time due to the ongoing energy and food crisis. Due to increase in demand of energy the demand of fossil fuels will increase. The limited fossil fuels cannot meet the demand of the current energy produced. Many new technologies are being adopted by scientists. New developments in boiler technology have made the industries work well so they can move towards an economic and environment friendly approach. The boilers used in industries have a high operational cost and their harvesting/collection mechanism is difficult and time consuming. Using conventional fossil fuels there is a lot of risk of hazardous air pollution which causes skin and infectious diseases. The current study is on corn cob feeder reactor where the reactor will be efficiently design in a textile mill. The impact of this boiler on environment was analyzed towards a sustainable approach and the different air emissions were measured and they were compared with the emissions of conventional fossil fuels where a significant reduction in using corn cob was found as compared to the conventional fossil fuels.

Suggested Citation

  • Muhammad Azhar Ali & Abdul Ghani & Abdul Nasir & Muhammad Yamin & Muhammad Nadeem, 2022. "Design, Fabrication And Exhaust Gases Analysis Of Corn Cob Feeding Unit Installed With Steam Boiler," Acta Mechanica Malaysia (AMM), Zibeline International Publishing, vol. 5(2), pages 47-51, October.
    • Handle: RePEc:zib:zbnamm:v:5:y:2022:i:2:p:47-51
    DOI: 10.26480/amm.02.2022.47.51
    as

    Download full text from publisher

    File URL: https://actamechanicamalaysia.com/archives/2amm2022/2amm2022-47-51.pdf
    Download Restriction: no
    File URL: https://libkey.io/10.26480/amm.02.2022.47.51?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    References listed on IDEAS

    as
    1. Pierre-Luc Lizotte & Philippe Savoie & Alain De Champlain, 2015. "Ash Content and Calorific Energy of Corn Stover Components in Eastern Canada," Energies, MDPI, vol. 8(6), pages 1-12, May.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Mirosław Wyszkowski & Natalia Kordala, 2024. "Effects of Humic Acids on Calorific Value and Chemical Composition of Maize Biomass in Iron-Contaminated Soil Phytostabilisation," Energies, MDPI, vol. 17(7), pages 1-19, April.
    2. Grzegorz Maj & Paweł Krzaczek & Wojciech Gołębiowski & Tomasz Słowik & Joanna Szyszlak-Bargłowicz & Grzegorz Zając, 2022. "Energy Consumption and Quality of Pellets Made of Waste from Corn Grain Drying Process," Sustainability, MDPI, vol. 14(13), pages 1-15, July.
    3. Weronika Kruszelnicka, 2020. "A New Model for Environmental Assessment of the Comminution Process in the Chain of Biomass Energy Processing †," Energies, MDPI, vol. 13(2), pages 1-21, January.
    4. Weiwei Wang, 2023. "Integrated Assessment of Economic Supply and Environmental Effects of Biomass Co-Firing in Coal Power Plants: A Case Study of Jiangsu, China," Energies, MDPI, vol. 16(6), pages 1-22, March.
    5. Cindy Nereida Morales-Máximo & Luis Bernardo López-Sosa & José Guadalupe Rutiaga-Quiñones & Juan Carlos Corral-Huacuz & Arturo Aguilera-Mandujano & Luis Fernando Pintor-Ibarra & Armando López-Miranda , 2022. "Characterization of Agricultural Residues of Zea mays for Their Application as Solid Biofuel: Case Study in San Francisco Pichátaro, Michoacán, Mexico," Energies, MDPI, vol. 15(19), pages 1-16, September.
    6. Brojolall, Neeha & Surroop, Dinesh, 2022. "Improving fuel characteristics through torrefaction," Energy, Elsevier, vol. 246(C).
    7. Hugo Guzmán-Bello & Iosvani López-Díaz & Miguel Aybar-Mejía & Máximo Domínguez-Garabitos & Jose Atilio de Frias, 2023. "Biomass Energy Potential of Agricultural Residues in the Dominican Republic," Sustainability, MDPI, vol. 15(22), pages 1-19, November.
    8. Edyta Boros-Lajszner & Jadwiga Wyszkowska & Agata Borowik & Jan Kucharski, 2021. "Energetic Value of Elymus elongatus L. and Zea mays L. Grown on Soil Polluted with Ni 2+ , Co 2+ , Cd 2+ , and Sensitivity of Rhizospheric Bacteria to Heavy Metals," Energies, MDPI, vol. 14(16), pages 1-22, August.
    9. Masum, Md Farhad Hossain & Dwivedi, Puneet & Anderson, William F., 2020. "Estimating unit production cost, carbon intensity, and carbon abatement cost of electricity generation from bioenergy feedstocks in Georgia, United States," Renewable and Sustainable Energy Reviews, Elsevier, vol. 117(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:zib:zbnamm:v:5:y:2022:i:2:p:47-51. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Zibeline International Publishing (email available below). General contact details of provider: https://actamechanicamalaysia.com/ .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.