IDEAS home Printed from https://ideas.repec.org/a/wsi/ijmpcx/v25y2014i01ns0129183113400214.html
   My bibliography  Save this article

Lattice-Boltzmann Simulations Of Flows Over Backward-Facing Inclined Steps

Author

Listed:
  • RUPESH B. KOTAPATI

    (Exa Corporation, 55 Network Drive, Burlington, MA 01803, USA)

  • RICHARD SHOCK

    (Exa Corporation, 55 Network Drive, Burlington, MA 01803, USA)

  • HUDONG CHEN

    (Exa Corporation, 55 Network Drive, Burlington, MA 01803, USA)

Abstract

The lattice-Boltzmann method (LBM) is used in conjunction with a very large-eddy simulation (VLES) turbulence modeling approach to compute separated flows over backward-facing steps at different wall inclination angles. The Reynolds numberReHbased on the step heightHand center-line velocity at the channel inletuclis 64 000. The expansion ratio of the outlet section to the inlet section of the channel is 1.48. Wall inclination angles α considered include 10°, 15°, 20°, 25°, 30° and 90°. The computed flow fields for different inclination angles of the step are assessed against the laser Doppler anemometry (LDA) measurements of Makiola [B. Makiola, Ph.D. Thesis, University of Karlsruhe (1992); B. Ruck and B. Makiola, Flow separation over the step with inclined walls, inNear-Wall Turbulent Flows, eds. R. M. C. So, C. G. Speziale and B. E. Launder (Elsevier, 1993), p. 999.]. In addition to validating the lattice-Boltzmann solution with the experiments, this study also investigates the effects of three dimensionality, the proximity of the inlet to the step, and the grid resolution on the quality of the predictions.

Suggested Citation

  • Rupesh B. Kotapati & Richard Shock & Hudong Chen, 2014. "Lattice-Boltzmann Simulations Of Flows Over Backward-Facing Inclined Steps," International Journal of Modern Physics C (IJMPC), World Scientific Publishing Co. Pte. Ltd., vol. 25(01), pages 1-14.
  • Handle: RePEc:wsi:ijmpcx:v:25:y:2014:i:01:n:s0129183113400214
    DOI: 10.1142/S0129183113400214
    as

    Download full text from publisher

    File URL: http://www.worldscientific.com/doi/abs/10.1142/S0129183113400214
    Download Restriction: Access to full text is restricted to subscribers

    File URL: https://libkey.io/10.1142/S0129183113400214?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Lewandowski, Witold M. & Radziemska, Ewa & Buzuk, Maciej & Bieszk, Henryk, 2000. "Free convection heat transfer and fluid flow above horizontal rectangular plates," Applied Energy, Elsevier, vol. 66(2), pages 177-197, June.
    2. Bogaerts, Ph. & Castillo, J. & Hanus, R., 1997. "Analytical solution of the non-uniform heat exchange in a reactor cooling coil with constant fluid flow," Mathematics and Computers in Simulation (MATCOM), Elsevier, vol. 43(2), pages 101-113.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Naoki Takada & Akio Tomiyama, 2007. "Numerical Simulation Of Isothermal And Thermal Two-Phase Flows Using Phase-Field Modeling," International Journal of Modern Physics C (IJMPC), World Scientific Publishing Co. Pte. Ltd., vol. 18(04), pages 536-545.
    2. Artur Cristea & Victor Sofonea, 2003. "Reduction Of Spurious Velocity In Finite Difference Lattice Boltzmann Models For Liquid–Vapor Systems," International Journal of Modern Physics C (IJMPC), World Scientific Publishing Co. Pte. Ltd., vol. 14(09), pages 1251-1266.
    3. Victor Sofonea & Robert F. Sekerka, 2005. "Diffusivity Of Two-Component Isothermal Finite Difference Lattice Boltzmann Models," International Journal of Modern Physics C (IJMPC), World Scientific Publishing Co. Pte. Ltd., vol. 16(07), pages 1075-1090.
    4. Huang, Si-Min & Yang, Minlin, 2013. "Longitudinal fluid flow and heat transfer between an elliptical hollow fiber membrane tube bank used for air humidification," Applied Energy, Elsevier, vol. 112(C), pages 75-82.
    5. Yong Rao & Yushan Ni & Chaofeng Liu, 2008. "Flow Effect Around Two Square Cylinders Arranged Side By Side Using Lattice Boltzmann Method," International Journal of Modern Physics C (IJMPC), World Scientific Publishing Co. Pte. Ltd., vol. 19(11), pages 1683-1694.
    6. Santosh Ansumali & Shyam Sunder Chikatamarla & Christos Emmanouil Frouzakis & Konstantinos Boulouchos, 2004. "Entropic Lattice Boltzmann Simulation Of The Flow Past Square Cylinder," International Journal of Modern Physics C (IJMPC), World Scientific Publishing Co. Pte. Ltd., vol. 15(03), pages 435-445.
    7. Artur Cristea, 2006. "Numerical Effects In A Finite Difference Lattice Boltzmann Model For Liquid-Vapour Systems," International Journal of Modern Physics C (IJMPC), World Scientific Publishing Co. Pte. Ltd., vol. 17(08), pages 1191-1201.
    8. Sardar Bilal & Maryam Rehman & Samad Noeiaghdam & Hijaz Ahmad & Ali Akgül, 2021. "Numerical Analysis of Natural Convection Driven Flow of a Non-Newtonian Power-Law Fluid in a Trapezoidal Enclosure with a U-Shaped Constructal," Energies, MDPI, vol. 14(17), pages 1-17, August.
    9. Ismail, M.S. & Ingham, D.B. & Hughes, K.J. & Ma, L. & Pourkashanian, M., 2013. "Thermal modelling of the cathode in air-breathing PEM fuel cells," Applied Energy, Elsevier, vol. 111(C), pages 529-537.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:wsi:ijmpcx:v:25:y:2014:i:01:n:s0129183113400214. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Tai Tone Lim (email available below). General contact details of provider: http://www.worldscinet.com/ijmpc/ijmpc.shtml .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.