IDEAS home Printed from https://ideas.repec.org/a/spr/ijsaem/v10y2019i4d10.1007_s13198-018-0732-y.html
   My bibliography  Save this article

Reliability improvement of fork biasing spring in MCCB mechanism

Author

Listed:
  • Ajinkya Shirurkar

    (Vellore Institute of Technology Chennai Campus
    L&T EAIC)

  • Yogesh Patil

    (L&T EAIC)

  • D. Davidson Jebaseelan

    (Vellore Institute of Technology Chennai Campus)

Abstract

Trips are used in moulded case circuit breaker (MCCB) to provide protection to low voltage distribution systems. Trip free can be achieved by using the fork biasing spring, that helps the fork to gets back to its intended trip position after the breaker gets tripped and helps avoiding intermediate position. Mechanical endurance testing of MCCBs mechanism for trip operation showed that fork biasing spring fails before the desired number of trip operation. In this study an improved design for fork biasing spring is proposed in order to increase the reliability of fork biasing spring. The springs are assembled in the MCCB mechanism and are subject to mechanical endurance test for trip operation. The results obtained from mechanical endurance test are used to determine the reliability of the springs using Weibull, Normal, Exponential, Lognormal, 3 Parameter Weibull, 3 Parameter Lognormal, 2 Parameter Exponential and 3 Parameter Loglogistic distribution for life data plots. The cause of the failure in present fork biasing spring is due to hook breakage in extension springs and the recommended torsion spring increases reliability.

Suggested Citation

  • Ajinkya Shirurkar & Yogesh Patil & D. Davidson Jebaseelan, 2019. "Reliability improvement of fork biasing spring in MCCB mechanism," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 10(4), pages 491-498, August.
    • Handle: RePEc:spr:ijsaem:v:10:y:2019:i:4:d:10.1007_s13198-018-0732-y
    DOI: 10.1007/s13198-018-0732-y
    as

    Download full text from publisher

    File URL: http://link.springer.com/10.1007/s13198-018-0732-y
    File Function: Abstract
    Download Restriction: Access to the full text of the articles in this series is restricted.
    File URL: https://libkey.io/10.1007/s13198-018-0732-y?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Jiang, R. & Murthy, D.N.P., 2011. "A study of Weibull shape parameter: Properties and significance," Reliability Engineering and System Safety, Elsevier, vol. 96(12), pages 1619-1626.
    2. Kim, Jin Seon & Yum, Bong-Jin, 2008. "Selection between Weibull and lognormal distributions: A comparative simulation study," Computational Statistics & Data Analysis, Elsevier, vol. 53(2), pages 477-485, December.
    3. Santosh B. Rane & Yahya A. M. Narvel, 2016. "Reliability assessment and improvement of air circuit breaker (ACB) mechanism by identifying and eliminating the root causes," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 7(1), pages 305-321, December.
    4. Chen, Colin, 2006. "Tests of fit for the three-parameter lognormal distribution," Computational Statistics & Data Analysis, Elsevier, vol. 50(6), pages 1418-1440, March.
    5. Vera, J. Fernando & Di­az-Garci­a, Jose A., 2008. "A global simulated annealing heuristic for the three-parameter lognormal maximum likelihood estimation," Computational Statistics & Data Analysis, Elsevier, vol. 52(12), pages 5055-5065, August.
    6. Nagatsuka, Hideki & Kamakura, Toshinari & Balakrishnan, N., 2013. "A consistent method of estimation for the three-parameter Weibull distribution," Computational Statistics & Data Analysis, Elsevier, vol. 58(C), pages 210-226.
    7. Basak, Prasanta & Basak, Indrani & Balakrishnan, N., 2009. "Estimation for the three-parameter lognormal distribution based on progressively censored data," Computational Statistics & Data Analysis, Elsevier, vol. 53(10), pages 3580-3592, August.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Sainath G. Bidikar & Santosh B. Rane & Prathamesh R. Potdar, 2022. "Product development using Design for Six Sigma approach: case study in switchgear industry," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 13(1), pages 203-230, February.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Santosh B. Rane & Yahya A. M. Narvel, 2016. "Reliability assessment and improvement of air circuit breaker (ACB) mechanism by identifying and eliminating the root causes," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 7(1), pages 305-321, December.
    2. Santosh B. Rane & Yahya A.M. Narvel & Niloy Khatua, 2017. "Development of mechanism for mounting secondary isolating contacts (SICs) in air circuit breakers (ACBs) with high operational reliability," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 8(2), pages 1816-1831, November.
    3. Kim, Jin Seon & Yum, Bong-Jin, 2008. "Selection between Weibull and lognormal distributions: A comparative simulation study," Computational Statistics & Data Analysis, Elsevier, vol. 53(2), pages 477-485, December.
    4. Rajkumar Bhimgonda Patil & Basavraj S Kothavale & Laxman Yadu Waghmode, 2019. "Selection of time-to-failure model for computerized numerical control turning center based on the assessment of trends in maintenance data," Journal of Risk and Reliability, , vol. 233(2), pages 105-117, April.
    5. Dewan, Isha & Dijoux, Yann, 2015. "Modelling repairable systems with an early life under competing risks and asymmetric virtual age," Reliability Engineering and System Safety, Elsevier, vol. 144(C), pages 215-224.
    6. Refah Alotaibi & Mazen Nassar & Hoda Rezk & Ahmed Elshahhat, 2022. "Inferences and Engineering Applications of Alpha Power Weibull Distribution Using Progressive Type-II Censoring," Mathematics, MDPI, vol. 10(16), pages 1-21, August.
    7. Sainath G. Bidikar & Santosh B. Rane & Prathamesh R. Potdar, 2022. "Product development using Design for Six Sigma approach: case study in switchgear industry," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 13(1), pages 203-230, February.
    8. Santosh B. Rane & Sandesh Wavhal & Prathamesh R. Potdar, 2023. "Integration of Lean Six Sigma with Internet of Things (IoT) for productivity improvement: a case study of contactor manufacturing industry," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 14(5), pages 1990-2018, October.
    9. Vega, Manuel A. & Hu, Zhen & Todd, Michael D., 2020. "Optimal maintenance decisions for deteriorating quoin blocks in miter gates subject to uncertainty in the condition rating protocol," Reliability Engineering and System Safety, Elsevier, vol. 204(C).
    10. Jiang, R., 2013. "A tradeoff BX life and its applications," Reliability Engineering and System Safety, Elsevier, vol. 113(C), pages 1-6.
    11. Krishna, Hare & Kumar, Kapil, 2011. "Reliability estimation in Lindley distribution with progressively type II right censored sample," Mathematics and Computers in Simulation (MATCOM), Elsevier, vol. 82(2), pages 281-294.
    12. Xiaomin Wan & Liubao Peng & Yuanjian Li, 2015. "A Review and Comparison of Methods for Recreating Individual Patient Data from Published Kaplan-Meier Survival Curves for Economic Evaluations: A Simulation Study," PLOS ONE, Public Library of Science, vol. 10(3), pages 1-21, March.
    13. J. Vera & Rodrigo Macías & Willem Heiser, 2013. "Cluster Differences Unfolding for Two-Way Two-Mode Preference Rating Data," Journal of Classification, Springer;The Classification Society, vol. 30(3), pages 370-396, October.
    14. Hannig, Jan & Lai, Randy C.S. & Lee, Thomas C.M., 2014. "Computational issues of generalized fiducial inference," Computational Statistics & Data Analysis, Elsevier, vol. 71(C), pages 849-858.
    15. Tian, Yuzhu & Zhu, Qianqian & Tian, Maozai, 2015. "Estimation for mixed exponential distributions under type-II progressively hybrid censored samples," Computational Statistics & Data Analysis, Elsevier, vol. 89(C), pages 85-96.
    16. Rashad M. EL-Sagheer, 2018. "Estimation of parameters of Weibull–Gamma distribution based on progressively censored data," Statistical Papers, Springer, vol. 59(2), pages 725-757, June.
    17. Acitas, Sukru & Aladag, Cagdas Hakan & Senoglu, Birdal, 2019. "A new approach for estimating the parameters of Weibull distribution via particle swarm optimization: An application to the strengths of glass fibre data," Reliability Engineering and System Safety, Elsevier, vol. 183(C), pages 116-127.
    18. Soumya Roy & Chiranjit Mukhopadhyay, 2015. "Maximum likelihood analysis of multi-stress accelerated life test data of series systems with competing log-normal causes of failure," Journal of Risk and Reliability, , vol. 229(2), pages 119-130, April.
    19. E. Bothma & J. S. Allison & I. J. H. Visagie, 2022. "New classes of tests for the Weibull distribution using Stein’s method in the presence of random right censoring," Computational Statistics, Springer, vol. 37(4), pages 1751-1770, September.
    20. Mehdi Tavakoli & Mehdi Nafar, 2021. "Modification of the FFTA method for calculating and analyzing the human reliability of maintenance groups in power transmission grids," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 12(6), pages 1221-1234, December.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:spr:ijsaem:v:10:y:2019:i:4:d:10.1007_s13198-018-0732-y. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Sonal Shukla or Springer Nature Abstracting and Indexing (email available below). General contact details of provider: http://www.springer.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.