IDEAS home Printed from https://ideas.repec.org/a/sae/risrel/v235y2021i2p268-281.html
   My bibliography  Save this article

Reliability and availability modeling of Subsea Autonomous High Integrity Pressure Protection System with partial stroke test by Dynamic Bayesian

Author

Listed:
  • Chuan Wang
  • Yupeng Liu
  • Wen Hou
  • Chao Yu
  • Guorong Wang
  • Yuyan Zheng

Abstract

Subsea Autonomous High Integrity Pressure Protection System is used in the subsea production process to lower the pressure level of downstream equipment and pipelines and to protect low-pressure pipelines and equipment. Once failure occurs, it will cause serious environmental damage and huge economic losses. In this article, a method of Dynamic Bayesian networks is proposed based on different failure types detected by different test methods. The reliability and availability of HIPPS with different detection methods were analyzed quantitatively. The results show that the performance of the system is improved significantly after inspection and maintenance. Compared with traditional methods, the performance of HIPPS is improved after the partial stroke test is introduced. Through sensitivity analysis, it is found that failure rates have a greater impact on the reliability of HIPPS valves. Increasing partial stroke test coverage can improve HIPPS performance. To improve the reliability of HIPPS, it is necessary to improve the reliability of the execution unit, especially the HIPPS valves. The analysis of the PST strategy can provide a theoretical basis for selecting the frequency of partial stroke test and functional test interval in actual projects.

Suggested Citation

  • Chuan Wang & Yupeng Liu & Wen Hou & Chao Yu & Guorong Wang & Yuyan Zheng, 2021. "Reliability and availability modeling of Subsea Autonomous High Integrity Pressure Protection System with partial stroke test by Dynamic Bayesian," Journal of Risk and Reliability, , vol. 235(2), pages 268-281, April.
    • Handle: RePEc:sae:risrel:v:235:y:2021:i:2:p:268-281
    DOI: 10.1177/1748006X20947851
    as

    Download full text from publisher

    File URL: https://journals.sagepub.com/doi/10.1177/1748006X20947851
    Download Restriction: no
    File URL: https://libkey.io/10.1177/1748006X20947851?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    References listed on IDEAS

    as
    1. Rajagopal, 2014. "The Human Factors," Palgrave Macmillan Books, in: Architecting Enterprise, chapter 9, pages 225-249, Palgrave Macmillan.
    2. Jones, B. & Jenkinson, I. & Yang, Z. & Wang, J., 2010. "The use of Bayesian network modelling for maintenance planning in a manufacturing industry," Reliability Engineering and System Safety, Elsevier, vol. 95(3), pages 267-277.
    3. Kohda, Takehisa & Cui, Weimin, 2007. "Risk-based reconfiguration of safety monitoring system using dynamic Bayesian network," Reliability Engineering and System Safety, Elsevier, vol. 92(12), pages 1716-1723.
    4. R Pascual & D Louit & A K S Jardine, 2011. "Optimal inspection intervals for safety systems with partial inspections," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 62(12), pages 2051-2062, December.
    5. Innal, Fares & Lundteigen, Mary Ann & Liu, Yiliu & Barros, Anne, 2016. "PFDavg generalized formulas for SIS subject to partial and full periodic tests based on multi-phase Markov models," Reliability Engineering and System Safety, Elsevier, vol. 150(C), pages 160-170.
    6. Liu, Yiliu & Rausand, Marvin, 2013. "Reliability effects of test strategies on safety-instrumented systems in different demand modes," Reliability Engineering and System Safety, Elsevier, vol. 119(C), pages 235-243.
    7. R Pascual & D Louit & A K S Jardine, 2011. "Optimal inspection intervals for safety systems with partial inspections," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 62(12), pages 2051-2062, December.
    8. Torres-Echeverría, A.C. & Martorell, S. & Thompson, H.A., 2009. "Modelling and optimization of proof testing policies for safety instrumented systems," Reliability Engineering and System Safety, Elsevier, vol. 94(4), pages 838-854.
    9. Wu, Shengnan & Zhang, Laibin & Zheng, Wenpei & Liu, Yiliu & Lundteigen, Mary Ann, 2019. "Reliability modeling of subsea SISs partial testing subject to delayed restoration," Reliability Engineering and System Safety, Elsevier, vol. 191(C).
    10. Kim, Suk Joon & Seong, Poong Hyun & Lee, Jun Seok & Kim, Man Cheol & Kang, Hyun Gook & Jang, Seung Cheol, 2006. "A method for evaluating fault coverage using simulated fault injection for digitalized systems in nuclear power plants," Reliability Engineering and System Safety, Elsevier, vol. 91(5), pages 614-623.
    11. Jin, Hui & Rausand, Marvin, 2014. "Reliability of safety-instrumented systems subject to partial testing and common-cause failures," Reliability Engineering and System Safety, Elsevier, vol. 121(C), pages 146-151.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Hongyan Dui & Jiaying Song & Yun-an Zhang, 2023. "Reliability and Service Life Analysis of Airbag Systems," Mathematics, MDPI, vol. 11(2), pages 1-13, January.
    2. Wu, Shengnan & Zhang, Qiao & Li, Bin & Zhang, Laibin & Zheng, Wenpei & Li, Zhong & Li, Zhandong & Liu, Yiliu, 2023. "Reliability analysis of subsea wellhead system subject to fatigue and degradation during service life," Reliability Engineering and System Safety, Elsevier, vol. 239(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Wu, Shengnan & Zhang, Laibin & Zheng, Wenpei & Liu, Yiliu & Lundteigen, Mary Ann, 2019. "Reliability modeling of subsea SISs partial testing subject to delayed restoration," Reliability Engineering and System Safety, Elsevier, vol. 191(C).
    2. Chuan Wang & Jun Gou & Yingcheng Tian & Hao Jin & Chao Yu & Yupeng Liu & Jiajun Ma & Yong Xia, 2022. "Reliability and availability evaluation of subsea high integrity pressure protection system using stochastic Petri net," Journal of Risk and Reliability, , vol. 236(3), pages 508-521, June.
    3. Zhang, Aibo & Hao, Songhua & Li, Peng & Xie, Min & Liu, Yiliu, 2022. "Performance modeling for condition-based activation of the redundant safety system subject to harmful tests," Reliability Engineering and System Safety, Elsevier, vol. 226(C).
    4. Rachid Sal & Rachid Nait-Said & Mouloud Bourareche, 2017. "Dealing with uncertainty in effect analysis of test strategies on safety instrumented system performance," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 8(2), pages 1945-1958, November.
    5. Liu, Yiliu & Rausand, Marvin, 2016. "Proof-testing strategies induced by dangerous detected failures of safety-instrumented systems," Reliability Engineering and System Safety, Elsevier, vol. 145(C), pages 366-372.
    6. Li, Mei & Liu, Zixian & Li, Xiaopeng & Liu, Yiliu, 2019. "Dynamic risk assessment in healthcare based on Bayesian approach," Reliability Engineering and System Safety, Elsevier, vol. 189(C), pages 327-334.
    7. Zhang, Nan & Cai, Kaiquan & Zhang, Jun & Wang, Tian, 2022. "A condition-based maintenance policy considering failure dependence and imperfect inspection for a two-component system," Reliability Engineering and System Safety, Elsevier, vol. 217(C).
    8. Cai, Baoping & Liu, Yonghong & Ma, Yunpeng & Huang, Lei & Liu, Zengkai, 2015. "A framework for the reliability evaluation of grid-connected photovoltaic systems in the presence of intermittent faults," Energy, Elsevier, vol. 93(P2), pages 1308-1320.
    9. Vedpal Arya & S. G. Deshmukh & Naresh Bhatnagar, 2019. "Product quality in an inclusive manufacturing system: some considerations," Journal of Intelligent Manufacturing, Springer, vol. 30(8), pages 2871-2884, December.
    10. Meng, Huixing & Kloul, Leïla & Rauzy, Antoine, 2018. "Modeling patterns for reliability assessment of safety instrumented systems," Reliability Engineering and System Safety, Elsevier, vol. 180(C), pages 111-123.
    11. Chang, Chia-Hsun & Kontovas, Christos & Yu, Qing & Yang, Zaili, 2021. "Risk assessment of the operations of maritime autonomous surface ships," Reliability Engineering and System Safety, Elsevier, vol. 207(C).
    12. Alizadeh, Siamak & Sriramula, Srinivas, 2018. "Impact of common cause failure on reliability performance of redundant safety related systems subject to process demand," Reliability Engineering and System Safety, Elsevier, vol. 172(C), pages 129-150.
    13. Özkan Uğurlu & Serdar Yıldız & Sean Loughney & Jin Wang & Shota Kuntchulia & Irakli Sharabidze, 2020. "Analyzing Collision, Grounding, and Sinking Accidents Occurring in the Black Sea Utilizing HFACS and Bayesian Networks," Risk Analysis, John Wiley & Sons, vol. 40(12), pages 2610-2638, December.
    14. Kaptan, Mehmet & Uğurlu, Özkan & Wang, Jin, 2021. "The effect of nonconformities encountered in the use of technology on the occurrence of collision, contact and grounding accidents," Reliability Engineering and System Safety, Elsevier, vol. 215(C).
    15. Gabriel, Angelito & Ozansoy, Cagil & Shi, Juan, 2018. "Developments in SIL determination and calculation," Reliability Engineering and System Safety, Elsevier, vol. 177(C), pages 148-161.
    16. Wang, Chuan & Liu, Yupeng & Wang, Dongbo & Wang, Guorong & Wang, Dingya & Yu, Chao, 2021. "Reliability evaluation method based on dynamic fault diagnosis results: A case study of a seabed mud lifting system," Reliability Engineering and System Safety, Elsevier, vol. 214(C).
    17. Pérez Ramírez, Pedro A. & Utne, Ingrid Bouwer, 2013. "Decision support for life extension of technical systems through virtual age modelling," Reliability Engineering and System Safety, Elsevier, vol. 115(C), pages 55-69.
    18. Azizpour, Hooshyar & Lundteigen, Mary Ann, 2019. "Analysis of simplification in Markov-based models for performance assessment of Safety Instrumented System," Reliability Engineering and System Safety, Elsevier, vol. 183(C), pages 252-260.
    19. Zhang, Aibo & Wu, Shengnan & Fan, Dongming & Xie, Min & Cai, Baoping & Liu, Yiliu, 2022. "Adaptive testing policy for multi-state systems with application to the degrading final elements in safety-instrumented systems," Reliability Engineering and System Safety, Elsevier, vol. 221(C).
    20. Liu, Yiliu, 2014. "Optimal staggered testing strategies for heterogeneously redundant safety systems," Reliability Engineering and System Safety, Elsevier, vol. 126(C), pages 65-71.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:sae:risrel:v:235:y:2021:i:2:p:268-281. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: SAGE Publications (email available below). General contact details of provider: .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.