IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v12y2020i8p3349-d347984.html
   My bibliography  Save this article

Digital Facility Layout Planning

Author

Listed:
  • Mirco Peron

    (Department of Mechanical and Industrial Engineering, Norwegian University of Science and Technology, 7031 Trondheim, Norway)

  • Giuseppe Fragapane

    (Department of Mechanical and Industrial Engineering, Norwegian University of Science and Technology, 7031 Trondheim, Norway)

  • Fabio Sgarbossa

    (Department of Mechanical and Industrial Engineering, Norwegian University of Science and Technology, 7031 Trondheim, Norway)

  • Michael Kay

    (Edward P. Fitts Department of Industrial and Systems Engineering, North Carolina State University, Raleigh, NC 27607, USA)

Abstract

In recent years, companies have increased their focus on sustainability to achieve environmental-friendly improvements, to manage pressures from society and regulations, and to attract customers that appreciate sustainability efforts. While companies have mainly aimed short-term/operational improvements, long-term improvements are difficult to reach. One of the fundamental, strategical decision-making processes for a company is facility layout planning. The layout of a facility can have a significant impact on daily operations. Aiming for the goal of sustainability, a dynamic layout decision-making process can support in achieving it. However, the technologies used currently enable only the design of a static layout due to the time-consuming operations involved. In this paper, the introduction of emerging technologies such as 3D mapping, Indoor Positioning System (IPS), Motion Capture System (MoCap), and Immersive Reality (IR) for dynamic layout planning are assessed and discussed. The results obtained clearly demonstrate that the usage of these technologies favor a reconfigurable layout, positively affecting all the three pillars constituting the sustainability concept: the costs involved are reduced, social aspects are improved, and the environment is safeguarded.

Suggested Citation

  • Mirco Peron & Giuseppe Fragapane & Fabio Sgarbossa & Michael Kay, 2020. "Digital Facility Layout Planning," Sustainability, MDPI, vol. 12(8), pages 1-17, April.
    • Handle: RePEc:gam:jsusta:v:12:y:2020:i:8:p:3349-:d:347984
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/12/8/3349/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2071-1050/12/8/3349/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Martina Calzavara & Daria Battini & David Bogataj & Fabio Sgarbossa & Ilenia Zennaro, 2020. "Ageing workforce management in manufacturing systems: state of the art and future research agenda," International Journal of Production Research, Taylor & Francis Journals, vol. 58(3), pages 729-747, February.
    2. Gordon C. Armour & Elwood S. Buffa, 1963. "A Heuristic Algorithm and Simulation Approach to Relative Location of Facilities," Management Science, INFORMS, vol. 9(2), pages 294-309, January.
    3. Alena Otto & Nils Boysen & Armin Scholl & Rico Walter, 2017. "Ergonomic workplace design in the fast pick area," OR Spectrum: Quantitative Approaches in Management, Springer;Gesellschaft für Operations Research e.V., vol. 39(4), pages 945-975, October.
    4. Ilenia Zennaro & Serena Finco & Daria Battini & Alessandro Persona, 2019. "Big size highly customised product manufacturing systems: a literature review and future research agenda," International Journal of Production Research, Taylor & Francis Journals, vol. 57(15-16), pages 5362-5385, August.
    5. Rajesh Attri & Sandeep Grover, 2017. "Modelling the quality enabled factors of facility layout design stage of production system life cycle," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 8(1), pages 413-423, January.
    6. Nathalie Marcoux & Diane Riopel & André Langevin, 2005. "Models and Methods for Facilities Layout Design from an Applicability to Real-World Perspective," Springer Books, in: André Langevin & Diane Riopel (ed.), Logistics Systems: Design and Optimization, chapter 0, pages 123-170, Springer.
    7. Boysen, Nils & de Koster, René & Weidinger, Felix, 2019. "Warehousing in the e-commerce era: A survey," European Journal of Operational Research, Elsevier, vol. 277(2), pages 396-411.
    8. Rajesh Attri & Sandeep Grover, 2017. "Analysis of quality enabled factors of production planning system stage of production system life cycle using interpretive structural modelling approach," International Journal of Productivity and Quality Management, Inderscience Enterprises Ltd, vol. 22(1), pages 22-41.
    9. Boysen, Nils & de Koster, René & Weidinger, Felix, 2019. "Warehousing in the e-commerce era: A survey," Publications of Darmstadt Technical University, Institute for Business Studies (BWL) 126185, Darmstadt Technical University, Department of Business Administration, Economics and Law, Institute for Business Studies (BWL).
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Donggi Kim & Keuntae Cho, 2022. "Digital Transformation Characteristics of the Semiconductor Industry Ecosystem," Sustainability, MDPI, vol. 15(1), pages 1-19, December.
    2. Xiaoting Shang & Huayong Niu, 2023. "Analysis of the Spatiotemporal Evolution and Driving Factors of China’s Digital Economy Development Based on ESDA and GM-GWR Model," Sustainability, MDPI, vol. 15(15), pages 1-21, August.
    3. Yongqiang Su & Jinfa Shi & Manman Zhang, 2022. "Research on the Construction and Measurement of the HQDMI Evaluation Index System—A Case Study of China," Sustainability, MDPI, vol. 14(22), pages 1-30, November.
    4. Lorena Espina-Romero & Jesús Guerrero-Alcedo, 2022. "Fields Touched by Digitalization: Analysis of Scientific Activity in Scopus," Sustainability, MDPI, vol. 14(21), pages 1-16, November.
    5. Yan Wang & Ping Han, 2023. "Digital Transformation, Service-Oriented Manufacturing, and Total Factor Productivity: Evidence from A-Share Listed Companies in China," Sustainability, MDPI, vol. 15(13), pages 1-24, June.
    6. Jiaqi Chang & Qingxin Lan & Wan Tang & Hailong Chen & Jun Liu & Yunpeng Duan, 2023. "Research on the Impact of Digital Economy on Manufacturing Total Factor Productivity," Sustainability, MDPI, vol. 15(7), pages 1-21, March.
    7. Veera Babu Ramakurthi & Vijaya Kumar Manupati & Leonilde Varela & Goran Putnik, 2023. "Leveraging Blockchain to Support Collaborative Distributed Manufacturing Scheduling," Sustainability, MDPI, vol. 15(4), pages 1-23, February.
    8. Huailian Lin & Shuqiao Wu & Si Zhang & Wenting Liu, 2023. "Design of Reverse Network for Recyclable Packaging Boxes under Uncertainties," Sustainability, MDPI, vol. 15(15), pages 1-17, July.
    9. Shuangjie Li & Huifang E & Liming Wang & Huidan Xue, 2023. "Factor Misallocation and Optimization in China’s Manufacturing Industry," Sustainability, MDPI, vol. 15(5), pages 1-21, February.
    10. Ting Zhu & Xiaqing Chen & Wenwen Zhang & Basil Sharp, 2023. "Analysis of the Spatial–Temporal Evolution of the Digital Economy and Its Impact on the Employment Structure in China from 2001 to 2020," Sustainability, MDPI, vol. 15(12), pages 1-18, June.
    11. László Péter Pusztai & Lajos Nagy & István Budai, 2023. "A Risk Management Framework for Industry 4.0 Environment," Sustainability, MDPI, vol. 15(2), pages 1-19, January.
    12. Huilin Yao & Rizhao Gong & Zhihui Yuan, 2022. "Multi-Oligopoly Sequential Pricing Mechanisms and Their Game Analysis in Raw Material Supply Chains," Sustainability, MDPI, vol. 14(23), pages 1-21, December.
    13. Arindam Das, 2023. "The Relationship between International Trade in Industry 4.0 Products and National-Level Sustainability Performance: An Empirical Investigation," Sustainability, MDPI, vol. 15(2), pages 1-15, January.
    14. Meiling Li & Lijie Zhang & Zhuangzhuang Zhang, 2023. "Impact of Digital Economy on Inter-Regional Trade: An Empirical Analysis in China," Sustainability, MDPI, vol. 15(15), pages 1-22, August.
    15. Jeoung Yul Lee & Ilkhom Okmirzaevich Irisboev & Yeon-Sik Ryu, 2021. "Literature Review on Digitalization in Facilities Management and Facilities Management Performance Measurement: Contribution of Industry 4.0 in the Global Era," Sustainability, MDPI, vol. 13(23), pages 1-29, December.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. David Winkelmann & Frederik Tolkmitt & Matthias Ulrich & Michael Romer, 2022. "Integrated storage assignment for an e-grocery fulfilment centre: Accounting for day-of-week demand patterns," Papers 2209.03998, arXiv.org, revised May 2023.
    2. Tuyishime, Ange-Marie & Valilai, Omid Fatahi, 2022. "Sustainable last mile delivery network using social media data analytics," Chapters from the Proceedings of the Hamburg International Conference of Logistics (HICL), in: Kersten, Wolfgang & Jahn, Carlos & Blecker, Thorsten & Ringle, Christian M. (ed.), Changing Tides: The New Role of Resilience and Sustainability in Logistics and Supply Chain Management – Innovative Approaches for the Shift to a New , volume 33, pages 841-874, Hamburg University of Technology (TUHH), Institute of Business Logistics and General Management.
    3. Kersten, Wolfgang & Jahn, Carlos & Blecker, Thorsten & Ringle, Christian M. (ed.), 2022. "Changing Tides: The New Role of Resilience and Sustainability in Logistics and Supply Chain Management – Innovative Approaches for the Shift to a New Era," Proceedings of the Hamburg International Conference of Logistics (HICL), Hamburg University of Technology (TUHH), Institute of Business Logistics and General Management, volume 33, number 33.
    4. Boysen, Nils & Schwerdfeger, Stefan & Stephan, Konrad, 2023. "A review of synchronization problems in parts-to-picker warehouses," European Journal of Operational Research, Elsevier, vol. 307(3), pages 1374-1390.
    5. Jiang, Min & Huang, George Q., 2022. "Intralogistics synchronization in robotic forward-reserve warehouses for e-commerce last-mile delivery," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 158(C).
    6. Junming Liu & Weiwei Chen & Jingyuan Yang & Hui Xiong & Can Chen, 2022. "Iterative Prediction-and-Optimization for E-Logistics Distribution Network Design," INFORMS Journal on Computing, INFORMS, vol. 34(2), pages 769-789, March.
    7. Zhuang, Yanling & Zhou, Yun & Yuan, Yufei & Hu, Xiangpei & Hassini, Elkafi, 2022. "Order picking optimization with rack-moving mobile robots and multiple workstations," European Journal of Operational Research, Elsevier, vol. 300(2), pages 527-544.
    8. Pourya Pourhejazy, 2020. "Destruction Decisions for Managing Excess Inventory in E-Commerce Logistics," Sustainability, MDPI, vol. 12(20), pages 1-12, October.
    9. Jiang, Min & Leung, K.H. & Lyu, Zhongyuan & Huang, George Q., 2020. "Picking-replenishment synchronization for robotic forward-reserve warehouses," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 144(C).
    10. Li, Xiaowei & Hua, Guowei & Huang, Anqiang & Sheu, Jiuh-Biing & Cheng, T.C.E. & Huang, Fengquan, 2020. "Storage assignment policy with awareness of energy consumption in the Kiva mobile fulfilment system," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 144(C).
    11. Lu Zhen & Jingwen Wu & Haolin Li & Zheyi Tan & Yingying Yuan, 2023. "Scheduling multiple types of equipment in an automated warehouse," Annals of Operations Research, Springer, vol. 322(2), pages 1119-1141, March.
    12. Boysen, Nils & Schwerdfeger, Stefan & W． Ulmer, Marlin, 2023. "Robotized sorting systems: Large-scale scheduling under real-time conditions with limited lookahead," European Journal of Operational Research, Elsevier, vol. 310(2), pages 582-596.
    13. Battaïa, Olga & Dolgui, Alexandre, 2022. "Hybridizations in line balancing problems: A comprehensive review on new trends and formulations," International Journal of Production Economics, Elsevier, vol. 250(C).
    14. Yang, Jingjing & de Koster, René B.M. & Guo, Xiaolong & Yu, Yugang, 2023. "Scheduling shuttles in deep-lane shuttle-based storage systems," European Journal of Operational Research, Elsevier, vol. 308(2), pages 696-708.
    15. Lam, H.Y. & Ho, G.T.S. & Mo, Daniel Y. & Tang, Valerie, 2023. "Responsive pick face replenishment strategy for stock allocation to fulfil e-commerce order," International Journal of Production Economics, Elsevier, vol. 264(C).
    16. Žulj, Ivan & Salewski, Hagen & Goeke, Dominik & Schneider, Michael, 2022. "Order batching and batch sequencing in an AMR-assisted picker-to-parts system," European Journal of Operational Research, Elsevier, vol. 298(1), pages 182-201.
    17. Russell Allgor & Tolga Cezik & Daniel Chen, 2023. "Algorithm for Robotic Picking in Amazon Fulfillment Centers Enables Humans and Robots to Work Together Effectively," Interfaces, INFORMS, vol. 53(4), pages 266-282, July.
    18. Maximilian Löffler & Nils Boysen & Michael Schneider, 2022. "Picker Routing in AGV-Assisted Order Picking Systems," INFORMS Journal on Computing, INFORMS, vol. 34(1), pages 440-462, January.
    19. Chen, Gang & Feng, Haolin & Luo, Kaiyi & Tang, Yanli, 2021. "Retrieval-oriented storage relocation optimization of an automated storage and retrieval system," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 155(C).
    20. M. Suresh & G. Mahadevan & R. Dev Abhishek, 2019. "Modelling the factors influencing the service quality in supermarkets," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 10(6), pages 1474-1486, December.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:12:y:2020:i:8:p:3349-:d:347984. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.