IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v16y2023i3p1090-d1040557.html
   My bibliography  Save this article

Curve Optimization for the Anidolic Daylight System Counterbalancing Energy Saving, Indoor Visual and Thermal Comfort for Sydney Dwellings

Author

Listed:
  • Ehsan Sorooshnia

    (Centre for Infrastructure Engineering, School of Engineering, Design and Built Environment, Kingswood, NSW 2747, Australia)

  • Payam Rahnamayiezekavat

    (Parramatta South Campus, Western Sydney University, Sydney, NSW 2116, Australia)

  • Maria Rashidi

    (Centre for Infrastructure Engineering, School of Engineering, Design and Built Environment, Kingswood, NSW 2747, Australia)

  • Mahsan Sadeghi

    (Energy Business Unit, Commonwealth Scientific and Industrial Research Organisation (CSIRO), Clayton South, VIC 3169, Australia
    Centre for Air Pollution, Energy, and Health Research, Sydney, NSW 2037, Australia)

  • Bijan Samali

    (Centre for Infrastructure Engineering, School of Engineering, Design and Built Environment, Kingswood, NSW 2747, Australia)

Abstract

Daylight penetration significantly affects building thermal-daylighting performance, and serve a dual function of permitting sunlight and creating a pleasant indoor environment. More recent attention has focused on the provision of daylight in the rear part of indoor spaces in designing sustainable buildings. Passive Anidolic Daylighting Systems (ADS) are effective tools for daylight collection and redistribution of sunlight towards the back of the room. As affordable and low-maintenance systems, they can provide indoor daylight and alleviate the problem of daylight over-provision near the window and under-provision in the rear part of the room. Much of the current literature on the ADS pays particular attention to visual comfort and rarely to thermal comfort. Therefore, a reasonable compromise between visual and thermal comfort as well as energy consumption becomes the main issue for energy-optimized aperture design in the tropics and subtropics, in cities such as Sydney, Australia. The objective of the current study was to devise a system that could act as a double-performance of shade and reflective tool. The central aim of this paper is to find the optimum curve that can optimize daylight admission without an expensive active tracking system. A combination of in-detail simulation (considering every possible sky condition throughout a year) and multi-objective optimization (considering indoor visual and thermal comfort as well as the view to the outside), which was validated by field measurement, resulted in the optimum ADS for the local dwellings in Sydney, Australia. An approximate 62% increase in Daylight Factor, 5% decrease in yearly average heating load, 17% savings in annual artificial lighting energy, and 30% decrease in Predicted Percentage Dissatisfied (PPD) were achieved through optimizing the ADS curve.

Suggested Citation

  • Ehsan Sorooshnia & Payam Rahnamayiezekavat & Maria Rashidi & Mahsan Sadeghi & Bijan Samali, 2023. "Curve Optimization for the Anidolic Daylight System Counterbalancing Energy Saving, Indoor Visual and Thermal Comfort for Sydney Dwellings," Energies, MDPI, vol. 16(3), pages 1-30, January.
    • Handle: RePEc:gam:jeners:v:16:y:2023:i:3:p:1090-:d:1040557
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/16/3/1090/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/16/3/1090/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Vincenzo Costanzo & Gianpiero Evola & Luigi Marletta & Fabiana Pistone Nascone, 2018. "Application of Climate Based Daylight Modelling to the Refurbishment of a School Building in Sicily," Sustainability, MDPI, vol. 10(8), pages 1-19, July.
    2. Pilechiha, Peiman & Mahdavinejad, Mohammadjavad & Pour Rahimian, Farzad & Carnemolla, Phillippa & Seyedzadeh, Saleh, 2020. "Multi-objective optimisation framework for designing office windows: quality of view, daylight and energy efficiency," Applied Energy, Elsevier, vol. 261(C).
    3. Mimi Ravn & Gabriela Mach & Ellen Kathrine Hansen & Georgios Triantafyllidis, 2022. "Simulating Physiological Potentials of Daylight Variables in Lighting Design," Sustainability, MDPI, vol. 14(2), pages 1-12, January.
    4. Domenico Campisi & Simone Gitto & Donato Morea, 2018. "An Evaluation of Energy and Economic Efficiency in Residential Buildings Sector: A Multi-criteria Analisys on an Italian Case Study," International Journal of Energy Economics and Policy, Econjournals, vol. 8(3), pages 185-196.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Mohamed Alzarooni & Abdul Ghani Olabi & Montaser Mahmoud & Safaa Alzubaidi & Mohammad Ali Abdelkareem, 2023. "Study on Improving the Energy Efficiency of a Building: Utilization of Daylight through Solar Film Sheets," Energies, MDPI, vol. 16(21), pages 1-17, October.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Hao Cai & Ling Liang & Jing Tang & Qianxian Wang & Lihong Wei & Jiaping Xie, 2019. "An Empirical Study on the Efficiency and Influencing Factors of the Photovoltaic Industry in China and an Analysis of Its Influencing Factors," Sustainability, MDPI, vol. 11(23), pages 1-22, November.
    2. Mostafa Sabbagh & Siraj Mandourah & Raghda Hareri, 2022. "Light Shelves Optimization for Daylight Improvement in Typical Public Classrooms in Saudi Arabia," Sustainability, MDPI, vol. 14(20), pages 1-16, October.
    3. Hassan Bazazzadeh & Barbara Świt-Jankowska & Nasim Fazeli & Adam Nadolny & Behnaz Safar ali najar & Seyedeh sara Hashemi safaei & Mohammadjavad Mahdavinejad, 2021. "Efficient Shading Device as an Important Part of Daylightophil Architecture; a Designerly Framework of High-Performance Architecture for an Office Building in Tehran," Energies, MDPI, vol. 14(24), pages 1-26, December.
    4. Antonio Peña-García, 2022. "An Approach for Lighting Calculations in Indoor Mirrored Facilities Based on Virtual Twin-Spaces," Sustainability, MDPI, vol. 14(19), pages 1-10, September.
    5. Alina Zaharia & Maria Claudia Diaconeasa & Laura Brad & Georgiana-Raluca Lădaru & Corina Ioanăș, 2019. "Factors Influencing Energy Consumption in the Context of Sustainable Development," Sustainability, MDPI, vol. 11(15), pages 1-28, August.
    6. Sun, Yanyi & Liu, Xin & Ming, Yang & Liu, Xiao & Mahon, Daniel & Wilson, Robin & Liu, Hao & Eames, Philip & Wu, Yupeng, 2021. "Energy and daylight performance of a smart window: Window integrated with thermotropic parallel slat-transparent insulation material," Applied Energy, Elsevier, vol. 293(C).
    7. Tarek M. Kamel & Amany Khalil & Mohammed M. Lakousha & Randa Khalil & Mohamed Hamdy, 2024. "Optimizing the View Percentage, Daylight Autonomy, Sunlight Exposure, and Energy Use: Data-Driven-Based Approach for Maximum Space Utilization in Residential Building Stock in Hot Climates," Energies, MDPI, vol. 17(3), pages 1-27, January.
    8. Moncef Krarti, 2019. "Evaluation of Energy Efficiency Potential for the Building Sector in the Arab Region," Energies, MDPI, vol. 12(22), pages 1-45, November.
    9. Ahmed Salih Mohammed & Panagiotis G. Asteris & Mohammadreza Koopialipoor & Dimitrios E. Alexakis & Minas E. Lemonis & Danial Jahed Armaghani, 2021. "Stacking Ensemble Tree Models to Predict Energy Performance in Residential Buildings," Sustainability, MDPI, vol. 13(15), pages 1-22, July.
    10. Khalid Alshaibani & Danny Li & Emmanuel Aghimien, 2020. "Sky Luminance Distribution Models: A Comparison with Measurements from a Maritime Desert Region," Energies, MDPI, vol. 13(20), pages 1-12, October.
    11. Bader Alshuraiaan, 2021. "Renewable Energy Technologies for Energy Efficient Buildings: The Case of Kuwait," Energies, MDPI, vol. 14(15), pages 1-16, July.
    12. Fabio Fantozzi & Hassan Hamdi & Michele Rocca & Stefano Vegnuti, 2019. "Use of Automated Control Systems and Advanced Energy Simulations in the Design of Climate Responsive Educational Building for Mediterranean Area," Sustainability, MDPI, vol. 11(6), pages 1-22, March.
    13. Razmi, Afshin & Rahbar, Morteza & Bemanian, Mohammadreza, 2022. "PCA-ANN integrated NSGA-III framework for dormitory building design optimization: Energy efficiency, daylight, and thermal comfort," Applied Energy, Elsevier, vol. 305(C).
    14. Mario Martín-Gamboa & Luis C. Dias & Paula Quinteiro & Fausto Freire & Luís Arroja & Ana Cláudia Dias, 2019. "Multi-Criteria and Life Cycle Assessment of Wood-Based Bioenergy Alternatives for Residential Heating: A Sustainability Analysis," Energies, MDPI, vol. 12(22), pages 1-17, November.
    15. Lucia Bednárová & Henrieta Pavolová & Zuzana Šimková & Tomáš Bakalár, 2023. "Economic Efficiency of Solar and Rainwater Systems—A Case Study," Energies, MDPI, vol. 16(1), pages 1-11, January.
    16. In-Tae Kim & Yu-Sin Kim & Meeryoung Cho & Hyeonggon Nam & Anseop Choi & Taeyon Hwang, 2019. "High-Performance Accuracy of Daylight-Responsive Dimming Systems with Illuminance by Distant Luminaires for Energy-Saving Buildings," Energies, MDPI, vol. 12(4), pages 1-21, February.
    17. V. S. K. V. Harish & Arun Kumar & Tabish Alam & Paolo Blecich, 2021. "Assessment of State-Space Building Energy System Models in Terms of Stability and Controllability," Sustainability, MDPI, vol. 13(21), pages 1-26, October.
    18. Yizhe Xu & Chengchu Yan & Hao Qian & Liang Sun & Gang Wang & Yanlong Jiang, 2021. "A Novel Optimization Method for Conventional Primary and Secondary School Classrooms in Southern China Considering Energy Demand, Thermal Comfort and Daylighting," Sustainability, MDPI, vol. 13(23), pages 1-19, November.
    19. Donato Morea & Mohamad El Mehtedi & Pasquale Buonadonna, 2023. "Energy Context: Analysis of Selected Studies and Future Research Developments," Energies, MDPI, vol. 16(3), pages 1-6, February.
    20. Jan Wajs & Aleksandra Golabek & Roksana Bochniak, 2019. "Photovoltaic Roof Tiles: The Influence of Heat Recovery on Overall Performance," Energies, MDPI, vol. 12(21), pages 1-12, October.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:16:y:2023:i:3:p:1090-:d:1040557. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.