IDEAS home Printed from https://ideas.repec.org/a/eee/reensy/v122y2014icp96-123.html
   My bibliography  Save this article

Progression of performance assessment modeling for the Yucca Mountain disposal system for spent nuclear fuel and high-level radioactive waste

Author

Listed:
  • Rechard, Rob P.
  • Wilson, Michael L.
  • Sevougian, S. David

Abstract

This paper summarizes the evolution of consequence modeling for a repository for spent nuclear fuel and high-level radioactive waste at Yucca Mountain in southern Nevada. The discussion includes four early performance assessments (PAs) conducted between 1982 and 1995 to support selection and to evaluate feasibility and three major PAs conducted between 1998 and 2008 to evaluate viability, recommend the site, and assess compliance. Modeling efforts in 1982 estimated dose to individuals 18km from the site caused by volcanic eruption through the repository. Modeling in 1984 estimated releases via the groundwater pathway because of container corrosion. In combination, this early analysis supported the first environmental assessment. Analysts in 1991 evaluated cumulative release, as specified in the 1985 US radiation protection standards, via the groundwater pathway over 104yr at a 5-km boundary by modeling waste degradation and flow/transport in the saturated and unsaturated zones. By 1992, however, the US Congress mandated a change to a dose measure. Thus, the 1993 and 1995 performance assessments improved modeling of waste container degradation to provide better estimates of radionuclide release rates out to 106yr. The 1998 viability assessment was a major step in modeling complexity. Dose at a 20-km boundary from the repository was evaluated through 106yr for undisturbed conditions using more elaborate modeling of flow and the addition of modules for modeling infiltration, drift seepage, the chemical environment, and biosphere transport. The 2000 assessment for the site recommendation refined the analysis. Seepage modeling was greatly improved and waste form degradation modeling included more chemical dependence. The 2008 compliance assessment for the license application incorporated the influence of the seismicity on waste package performance to evaluate dose at an ~18-km boundary.

Suggested Citation

  • Rechard, Rob P. & Wilson, Michael L. & Sevougian, S. David, 2014. "Progression of performance assessment modeling for the Yucca Mountain disposal system for spent nuclear fuel and high-level radioactive waste," Reliability Engineering and System Safety, Elsevier, vol. 122(C), pages 96-123.
    • Handle: RePEc:eee:reensy:v:122:y:2014:i:c:p:96-123
    DOI: 10.1016/j.ress.2013.06.026
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0951832013001919
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ress.2013.06.026?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Norman A. Eisenberg & Michael P. Lee & Timothy J. McCartin & Keith I. McConnell & Mark Thaggard & Andrew C. Campbell, 1999. "Development of a Performance Assessment Capability in the Waste Management Programs of the U.S. Nuclear Regulatory Commission," Risk Analysis, John Wiley & Sons, vol. 19(5), pages 847-876, October.
    2. A. B. Kersting & D. W. Efurd & D. L. Finnegan & D. J. Rokop & D. K. Smith & J. L. Thompson, 1999. "Migration of plutonium in ground water at the Nevada Test Site," Nature, Nature, vol. 397(6714), pages 56-59, January.
    3. Helton, Jon C. & Hansen, Clifford W. & Sallaberry, Cédric J., 2012. "Uncertainty and sensitivity analysis in performance assessment for the proposed high-level radioactive waste repository at Yucca Mountain, Nevada," Reliability Engineering and System Safety, Elsevier, vol. 107(C), pages 44-63.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Suh, Jung Woo & Sohn, So Young & Lee, Bo Kyeong, 2020. "Patent clustering and network analyses to explore nuclear waste management technologies," Energy Policy, Elsevier, vol. 146(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Rechard, Rob P. & Freeze, Geoff A. & Perry, Frank V., 2014. "Hazards and scenarios examined for the Yucca Mountain disposal system for spent nuclear fuel and high-level radioactive waste," Reliability Engineering and System Safety, Elsevier, vol. 122(C), pages 74-95.
    2. Rechard, Rob P. & Liu, Hui-Hai & Tsang, Yvonne W. & Finsterle, Stefan, 2014. "Site characterization of the Yucca Mountain disposal system for spent nuclear fuel and high-level radioactive waste," Reliability Engineering and System Safety, Elsevier, vol. 122(C), pages 32-52.
    3. Rechard, Rob P., 2014. "Results from past performance assessments for the Yucca Mountain disposal system for spent nuclear fuel and high-level radioactive waste," Reliability Engineering and System Safety, Elsevier, vol. 122(C), pages 207-222.
    4. Helton, J.C. & Hansen, C.W. & Sallaberry, C.J., 2014. "Conceptual structure and computational organization of the 2008 performance assessment for the proposed high-level radioactive waste repository at Yucca Mountain, Nevada," Reliability Engineering and System Safety, Elsevier, vol. 122(C), pages 223-248.
    5. Hou, Tianfeng & Nuyens, Dirk & Roels, Staf & Janssen, Hans, 2019. "Quasi-Monte Carlo based uncertainty analysis: Sampling efficiency and error estimation in engineering applications," Reliability Engineering and System Safety, Elsevier, vol. 191(C).
    6. McFarland, John & DeCarlo, Erin, 2020. "A Monte Carlo framework for probabilistic analysis and variance decomposition with distribution parameter uncertainty," Reliability Engineering and System Safety, Elsevier, vol. 197(C).
    7. Deman, G. & Kerrou, J. & Benabderrahmane, H. & Perrochet, P., 2015. "Sensitivity analysis of groundwater lifetime expectancy to hydro-dispersive parameters: The case of ANDRA Meuse/Haute-Marne site," Reliability Engineering and System Safety, Elsevier, vol. 134(C), pages 276-286.
    8. Narkuniene, Asta & Poskas, Povilas & Kilda, Raimondas & Bartkus, Gytis, 2015. "Uncertainty and sensitivity analysis of radionuclide migration through the engineered barriers of deep geological repository: Case of RBMK-1500 SNF," Reliability Engineering and System Safety, Elsevier, vol. 136(C), pages 8-16.
    9. Rechard, Rob P. & Cotton, Thomas A. & Voegele, Michael D., 2014. "Site selection and regulatory basis for the Yucca Mountain disposal system for spent nuclear fuel and high-level radioactive waste," Reliability Engineering and System Safety, Elsevier, vol. 122(C), pages 7-31.
    10. Helton, Jon C. & Brooks, Dusty M. & Sallaberry, Cédric J., 2020. "Margins associated with loss of assured safety for systems with multiple weak links and strong links," Reliability Engineering and System Safety, Elsevier, vol. 195(C).
    11. Saveleva, Elena & Svitelman, Valentina & Blinov, Petr & Valetov, Dmitry, 2021. "Sensitivity analysis and model calibration as a part of the model development process in radioactive waste disposal safety assessment," Reliability Engineering and System Safety, Elsevier, vol. 210(C).
    12. Steiner, M. & Bourinet, J.-M. & Lahmer, T., 2019. "An adaptive sampling method for global sensitivity analysis based on least-squares support vector regression," Reliability Engineering and System Safety, Elsevier, vol. 183(C), pages 323-340.
    13. Chakraborty, Souvik & Chowdhury, Rajib, 2017. "A hybrid approach for global sensitivity analysis," Reliability Engineering and System Safety, Elsevier, vol. 158(C), pages 50-57.
    14. Rechard, Rob P. & Stockman, Christine T., 2014. "Waste degradation and mobilization in performance assessments for the Yucca Mountain disposal system for spent nuclear fuel and high-level radioactive waste," Reliability Engineering and System Safety, Elsevier, vol. 122(C), pages 165-188.
    15. Zhang, Xiaoge & Mahadevan, Sankaran & Lau, Nathan & Weinger, Matthew B., 2020. "Multi-source information fusion to assess control room operator performance," Reliability Engineering and System Safety, Elsevier, vol. 194(C).
    16. Allaire, Douglas & Noel, George & Willcox, Karen & Cointin, Rebecca, 2014. "Uncertainty quantification of an Aviation Environmental Toolsuite," Reliability Engineering and System Safety, Elsevier, vol. 126(C), pages 14-24.
    17. Rechard, Rob P. & Arnold, Bill W. & Robinson, Bruce A. & Houseworth, James E., 2014. "Transport modeling in performance assessments for the Yucca Mountain disposal system for spent nuclear fuel and high-level radioactive waste," Reliability Engineering and System Safety, Elsevier, vol. 122(C), pages 189-206.
    18. Victor Malkovsky & Sergey Yudintsev & Michael Ojovan, 2023. "Forecast of 241 Am Migration from a System of Deep Horizontal Boreholes," Sustainability, MDPI, vol. 15(20), pages 1-15, October.
    19. Victor I. Malkovsky & Vladislav A. Petrov & Sergey V. Yudintsev & Michael I. Ojovan & Valeri V. Poluektov, 2023. "Influence of Rock Structure on Migration of Radioactive Colloids from an Underground Repository of High-Level Radioactive Waste," Sustainability, MDPI, vol. 15(1), pages 1-10, January.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:reensy:v:122:y:2014:i:c:p:96-123. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: https://www.journals.elsevier.com/reliability-engineering-and-system-safety .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.