IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v30y2005i2p221-233.html
   My bibliography  Save this article

Anisotropic heat transfer in composites based on high-thermal conductive carbon fibers

Author

Listed:
  • Hamada, Yuichi
  • Otsu, Wataru
  • Fukai, Jun
  • Morozumi, Yoshio
  • Miyatake, Osamu

Abstract

The authors have developed a shell-and-tube type thermal energy storage unit using carbon-fiber brushes as a thermal conductivity promoter. In this paper, experiments on heat transfer in the brush/n-octadecane composites are discussed, leading to further improvement of the unit. Experimental apparatuses imitate shell-and-tube type heat exchangers. Temperatures in the brush/n-octadecane composite are measured. The carbon brush improves the transient thermal responses in the entire composite. The effect of the brush on the thermal responses is especially obtained in the region where the directions of the fibers agree with those of the heat flows from the tubes to the center of the brush. The thermal responses are improved with an increase in the diameter of the brush. However, when the brush diameter is too large, the branching of the fibers near the tubes create a region with a low density of the fibers. This low-density area prevents the further enhancement of heat transfer. Accordingly, there is an optimum diameter of the brush. In addition, the thermal conductivity in the composite will further improve when the low-density area of the fibers does not exist.

Suggested Citation

  • Hamada, Yuichi & Otsu, Wataru & Fukai, Jun & Morozumi, Yoshio & Miyatake, Osamu, 2005. "Anisotropic heat transfer in composites based on high-thermal conductive carbon fibers," Energy, Elsevier, vol. 30(2), pages 221-233.
    • Handle: RePEc:eee:energy:v:30:y:2005:i:2:p:221-233
    DOI: 10.1016/j.energy.2004.04.024
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544204002154
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2004.04.024?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Tian, Y. & Zhao, C.Y., 2011. "A numerical investigation of heat transfer in phase change materials (PCMs) embedded in porous metals," Energy, Elsevier, vol. 36(9), pages 5539-5546.
    2. Dubey, Abhayjeet kumar & Sun, Jingyi & Choudhary, Tushar & Dash, Madhusmita & Rakshit, Dibakar & Ansari, M Zahid & Ramakrishna, Seeram & Liu, Yong & Nanda, Himansu Sekhar, 2023. "Emerging phase change materials with improved thermal efficiency for a clean and sustainable environment: An approach towards net zero," Renewable and Sustainable Energy Reviews, Elsevier, vol. 182(C).
    3. Ibrahim, Nasiru I. & Al-Sulaiman, Fahad A. & Rahman, Saidur & Yilbas, Bekir S. & Sahin, Ahmet Z., 2017. "Heat transfer enhancement of phase change materials for thermal energy storage applications: A critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 74(C), pages 26-50.
    4. Yang, Lei & Zhao, Jiafei & Liu, Weiguo & Yang, Mingjun & Song, Yongchen, 2015. "Experimental study on the effective thermal conductivity of hydrate-bearing sediments," Energy, Elsevier, vol. 79(C), pages 203-211.
    5. Tang, Xiaofen & Li, Wei & Zhang, Xingxiang & Shi, Haifeng, 2014. "Fabrication and characterization of microencapsulated phase change material with low supercooling for thermal energy storage," Energy, Elsevier, vol. 68(C), pages 160-166.
    6. Fernandes, D. & Pitié, F. & Cáceres, G. & Baeyens, J., 2012. "Thermal energy storage: “How previous findings determine current research priorities”," Energy, Elsevier, vol. 39(1), pages 246-257.
    7. Islam, Md. Parvez & Morimoto, Tetsuo, 2018. "Advances in low to medium temperature non-concentrating solar thermal technology," Renewable and Sustainable Energy Reviews, Elsevier, vol. 82(P3), pages 2066-2093.
    8. Jegadheeswaran, S. & Pohekar, Sanjay D., 2009. "Performance enhancement in latent heat thermal storage system: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 13(9), pages 2225-2244, December.

    More about this item

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:30:y:2005:i:2:p:221-233. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.