Best available techniques (BAT) reference document on surface treatment using organic solvents including preservation of wood and wood products with chemicals

The Best Available Techniques (BAT) Reference Document (BREF) on Surface Treatment using Organic Solvents including Preservation of Wood and Wood Products with Chemicals is part of a series of documents presenting the results of an exchange of information between EU Member States, the industries concerned, non-governmental organisations promoting environmental protection, and the Commission, to draw up, review and – where necessary – update BAT reference documents as required by Article 13(1) of Directive 2010/75/EU on Industrial Emissions (the Directive). This document is published by the European Commission pursuant to Article 13(6) of the Directive.The BREF on Surface Treatment Using Organic Solvents including Preservation of Wood and Wood Products with Chemicals covers the surface treatment of substances, objects or products using organic solvents as well as the preservation of wood and wood products using chemicals as specified in Sections 6.7 and 6.10 of Annex I to Directive 2010/75/EU respectively.Important issues for the implementation of Directive 2010/75/EU in the surface treatment using organic solvents (STS) and the wood preservation with chemicals (WPC) sectors are emissions to air and water as well as energy and water consumption. Chapter 1 provides general information on the STS sector and on the main environmental issues associated with their use. Chapters 2 to 14 give the applied processes, current emission and consumption levels, techniques to consider in the determination of BAT for the STS sectors that are covered by these chapters. Chapter 15 provides general information, applied processes, current emission and consumption levels, techniques to consider in the determination of BAT for the wood preservation sector. Chapter 16 provides thumbnail descriptions of additional STS sectors, for which a data collection via questionnaires has not been carried out. General techniques to consider in the determination of BAT (i.e. those techniques to consider that are widely applied in the STS sector) are reported in Chapter 17. Chapter 18 presents the BAT conclusions as defined in Article 3(12) of the Directive, both general and sector-specific. Chapter 19 provides the emerging techniques for the STS and WPC sectors. Concluding remarks and recommendations for future work are presented in Chapter 20.