IDEAS home Printed from https://ideas.repec.org/a/wsi/srlxxx/v28y2021i11ns0218625x21501110.html
   My bibliography  Save this article

Investigation Of Wiper Inserts Effects In Turning And Milling Processes

Author

Listed:
  • MURAT KIYAK

    (Department of Mechanical Engineering, Yildiz Technical University, Istanbul, Turkey)

Abstract

The surface roughness is a crucial factor in machining methods. The most effective factors on surface roughness are feed rate and tool nose radius. Due to the many advantages of wiper (multi-nose radius) inserts, their importance and use has been increasing recently. The purpose of this paper is to investigate the effect of wiper inserts on surface roughness and tool wear. In this study, conventional inserts and wiper inserts were experimentally compared separately in milling and turning operations. Compared to conventional inserts, the surface roughness values obtained using wiper inserts improved by 33% in turning operations and approximately 40% in milling operations. It was observed that the production time in the turning process was reduced by about 25% in the case of using wiper inserts compared to the use of conventional inserts. In milling, this ratio was determined to be approximately 43% due to the fact that it has multiple cutting edge. It has been observed that the use of wiper inserts in machining methods creates a significant time and cost saving advantage.

Suggested Citation

  • Murat Kiyak, 2021. "Investigation Of Wiper Inserts Effects In Turning And Milling Processes," Surface Review and Letters (SRL), World Scientific Publishing Co. Pte. Ltd., vol. 28(11), pages 1-9, November.
    • Handle: RePEc:wsi:srlxxx:v:28:y:2021:i:11:n:s0218625x21501110
    DOI: 10.1142/S0218625X21501110
    as

    Download full text from publisher

    File URL: http://www.worldscientific.com/doi/abs/10.1142/S0218625X21501110
    Download Restriction: Access to full text is restricted to subscribers
    File URL: https://libkey.io/10.1142/S0218625X21501110?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:wsi:srlxxx:v:28:y:2021:i:11:n:s0218625x21501110. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Tai Tone Lim (email available below). General contact details of provider: http://www.worldscinet.com/srl/srl.shtml .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.