IDEAS home Printed from https://ideas.repec.org/a/wsi/srlxxx/v23y2016i05ns0218625x16500311.html
   My bibliography  Save this article

MECHANICAL PROPERTIES AND HIGH TEMPERATURE OXIDATION BEHAVIOR OF Ti–Al COATING REINFORCED BY NITRIDES ON Ti–6Al–4V ALLOY

Author

Listed:
  • JINGJIE DAI

    (Suzhou Institute, Shandong University Suzhou, Jiangsu 215123, P. R. China†Key Laboratory of High-efficiency and Clean Mechanical Manufacture, Ministry of Education, School of Mechanical Engineering, Shandong University, Ji’nan, Shandong 250061, P. R. China§School of Mechanical and Electronic Engineering, Qingdao Binhai University, Qingdao, Shandong 266555, P. R. China)

  • HUIJUN YU

    (Suzhou Institute, Shandong University Suzhou, Jiangsu 215123, P. R. China†Key Laboratory of High-efficiency and Clean Mechanical Manufacture, Ministry of Education, School of Mechanical Engineering, Shandong University, Ji’nan, Shandong 250061, P. R. China)

  • JIYUN ZHU

    (#xA7;School of Mechanical and Electronic Engineering, Qingdao Binhai University, Qingdao, Shandong 266555, P. R. China)

  • FEI WENG

    (#x2021;Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials, Ministry of Education, School of Materials Science and Engineering, Shandong University, Ji’nan, Shandong 250061, P. R. China)

  • CHUANZHONG CHEN

    (#x2021;Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials, Ministry of Education, School of Materials Science and Engineering, Shandong University, Ji’nan, Shandong 250061, P. R. China)

Abstract

Ti–Al alloyed coating reinforced by nitrides was fabricated by laser surface alloying technique to improve mechanical properties and high temperature oxidation resistance of Ti–6Al–4V titanium alloy. Microstructures, mechanical properties and high temperature oxidation behavior of the alloyed coating were analyzed. The results show that the alloyed coating consisted of Ti3Al, TiAl2, TiN and Ti2AlN phases. Nitrides with different morphologies were dispersed in the alloyed coating. The maximum microhardness of the alloyed coating was 906HV. The friction coefficients of the alloyed coating at room temperature and high temperature were both one-fourth of the substrate. Mass gain of the alloyed coating oxidized at 800∘C for 1000h in static air was 5.16×10−3mg/mm2, which was 1/35th of the substrate. No obvious spallation was observed for the alloyed coating after oxidation. The alloyed coating exhibited excellent mechanical properties and long-term high temperature oxidation resistance, which improved surface properties of Ti–6Al–4V titanium alloy significantly.

Suggested Citation

  • Jingjie Dai & Huijun Yu & Jiyun Zhu & Fei Weng & Chuanzhong Chen, 2016. "MECHANICAL PROPERTIES AND HIGH TEMPERATURE OXIDATION BEHAVIOR OF Ti–Al COATING REINFORCED BY NITRIDES ON Ti–6Al–4V ALLOY," Surface Review and Letters (SRL), World Scientific Publishing Co. Pte. Ltd., vol. 23(05), pages 1-9, October.
    • Handle: RePEc:wsi:srlxxx:v:23:y:2016:i:05:n:s0218625x16500311
    DOI: 10.1142/S0218625X16500311
    as

    Download full text from publisher

    File URL: http://www.worldscientific.com/doi/abs/10.1142/S0218625X16500311
    Download Restriction: Access to full text is restricted to subscribers
    File URL: https://libkey.io/10.1142/S0218625X16500311?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:wsi:srlxxx:v:23:y:2016:i:05:n:s0218625x16500311. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Tai Tone Lim (email available below). General contact details of provider: http://www.worldscinet.com/srl/srl.shtml .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.