Recovery of Coal Values from Middling and Rejects by Froth Flotation and Mozley Mineral Separation

The recovery of coals values from Middling and Rejects carries out by using Froth flotation and Mozley Mineral Separation. The middling and rejects are the waste products from gravity beneficiation process, it has been noted that most of washery plants are selling this product at low cost because they have less values.The independent variables selected for Mozley Mineral Separator and their ranges were indicated in the parentheses as follow, water flow rates (400, 600, 800ml/s), amplitude (1.25, 1.5, 1.75inch) and collection time (30, 40, 60 s) while the independent variables for froth flotation were; Pulp density (10, 12.5, 15 %), collector dosage (39.3, 44.4, 49.5 g/t) and frother dosage (61.8, 65.3, 68.8 g/t). The number of experimental runs and regression equation determined by using Design Expert softwareThe d80 for middling and rejects samples were 10.5mm and 12.89mm respectively. The ash contents for the middling sample treated by froth flotation decrease from 37% to 15.85% at the reagent concentration of 49.5g/t collector, 65.3g/t frother and pulp density of 10%. The froth flotation results of middling sample shown to have a great reduction of ash contents. The overall optimum middling recovery and yield for washery grade I and II attain at reagent concentration and pulp density of 47.703g/t, 68.568g/t and 13.2% for collector, frother and pulp density respectively. The feed of reject coal was 71% and the ash contents reduced to 28.87% with the recovery of 0.85%. The analysis through Mozley mineral separator did not show significant changes in the reduction of ash from both middling and rejects. The ash contents achieved were above the scope of the studies for recovering of coal values. The experiments for middling and reject by froth flotation and Mozley mineral separator may be carried out by varying other parameters as well as the type of methods.