IDEAS home Printed from https://ideas.repec.org/a/ids/ijpmbe/v10y2020i3p350-366.html
   My bibliography  Save this article

Optimisation of cutting force using metaheuristics

Author

Listed:
  • Vineet Jain
  • Tilak Raj

Abstract

The significance of this research is to optimise the cutting force in turning by optimising the cutting parameters like cutting speed, feed, and depth of cut. Cutting force is one of the essential characteristic variables to be watch and controlled in the cutting processes to optimise tool life and surface roughness of the workpiece. The principal presumption was that the cutting forces increase due to the wearing of the tool. Cutting force is optimised by the metaheuristic, i.e., genetic algorithm (GA) and teaching-learning based optimisation (TLBO) algorithm. The analysis of the result shows that the optimal combination for low resultant cutting force is low cutting speed, low feed and low depth of cut. This study finds that by adjusting machining parameters, tool life can be enhanced because cutting forces increase due to the wearing of the tool. So, cutting forces have been used to maximise the tool life because cutting force increased rapidly as tool life finished. As a result, the production cost can be minimised and be extending the tool usage and subsequently, the machining time is reduced, and the tool usage can be extended.

Suggested Citation

  • Vineet Jain & Tilak Raj, 2020. "Optimisation of cutting force using metaheuristics," International Journal of Process Management and Benchmarking, Inderscience Enterprises Ltd, vol. 10(3), pages 350-366.
    • Handle: RePEc:ids:ijpmbe:v:10:y:2020:i:3:p:350-366
    as

    Download full text from publisher

    File URL: http://www.inderscience.com/link.php?id=107936
    Download Restriction: Access to full text is restricted to subscribers.
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:ids:ijpmbe:v:10:y:2020:i:3:p:350-366. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Sarah Parker (email available below). General contact details of provider: http://www.inderscience.com/browse/index.php?journalID=95 .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.