IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v15y2023i4p2879-d1058562.html
   My bibliography  Save this article

ZIF-67/SA@PVDF Ultrafiltration Membrane with Simultaneous Adsorption and Catalytic Oxidation for Dyes

Author

Listed:
  • Kaixuan Zhu

    (School of Chemical and Environmental Engineering, Anhui Polytechnic University, Wuhu 241000, China)

  • Shabin Mohammed

    (NYUAD Water Research Center, Department of Engineering, New York University Abu Dhabi, Abu Dhabi P.O. Box 129188, United Arab Emirates)

  • Hai Tang

    (School of Chemical and Environmental Engineering, Anhui Polytechnic University, Wuhu 241000, China)

  • Zongli Xie

    (CSIRO Manufacturing, Private Bag 10, Clayton South, VIC 3169, Australia)

  • Sisheng Fang

    (School of Chemical and Environmental Engineering, Anhui Polytechnic University, Wuhu 241000, China)

  • Shasha Liu

    (School of Chemical and Environmental Engineering, Anhui Polytechnic University, Wuhu 241000, China)

Abstract

Due to their stable chemical properties and complex structures, dyes are difficult to be removed from water. Herein, a ZIF-67/SA@PVDF (ZSA3@PVDF) mixed matrix membrane has been fabricated by incorporating silicon aerogel (SA) and zeolitic imidazolate framework material 67 (ZIF-67) nanoparticles in a polyvinylidene fluoride (PVDF) membrane for the removal and degradation of dyes from water. The influence of SA and ZIF-67 on the morphology and structure of the membrane was confirmed using scanning electron microscope (SEM) and atomic force microscope (AFM). In ZSA3@PVDF membrane, both SA and ZIF-67 are highly porous nanomaterials that possess good adsorption capacity, as confirmed by the Brunauer–Emmett–Teller (BET) result. In addition, the cobalt (Co) element of ZIF-67 can catalyze peroxymonosulfate (PMS) to generate strong oxidizing sulfate radicals (SO 4 2− ), contributing to improving regeneration capacity of the ZIF-67/SA@PVDF membrane. The water flux of ZSA3@PVDF membrane is 427.6 L m −2 h −1 bar −1 , and the Methylene blue (MB) removal rate is higher than 99% when filtrating 100 mL MB solution (5 mg/L). The regeneration test result shows that the removal rate of the ZSA3@PVDF membrane is still above 98% after five cycles of adsorption of MB. The self-cleaning experiment shows that the adsorption of SA in the ZSA3@PVDF membrane promotes the catalytic performance of the membrane, showing a better self-cleaning ability. The ZSA3@PVDF membrane provides a new strategy for the removal of dyes in the advanced purification of dye wastewater.

Suggested Citation

  • Kaixuan Zhu & Shabin Mohammed & Hai Tang & Zongli Xie & Sisheng Fang & Shasha Liu, 2023. "ZIF-67/SA@PVDF Ultrafiltration Membrane with Simultaneous Adsorption and Catalytic Oxidation for Dyes," Sustainability, MDPI, vol. 15(4), pages 1-16, February.
  • Handle: RePEc:gam:jsusta:v:15:y:2023:i:4:p:2879-:d:1058562
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/15/4/2879/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/2071-1050/15/4/2879/
    Download Restriction: no
    ---><---

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Guangyong Zeng & Hu Zheng & Kun Zhou & Hao Shi & Size Zheng & Hui Ma & Peng Wang & Shengyan Pu, 2023. "Preparation, Characterization and Application of Novel Photocatalytic Two-Dimensional Material Membrane: A Reform of Comprehensive Experimental Teaching," Sustainability, MDPI, vol. 15(14), pages 1-14, July.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:15:y:2023:i:4:p:2879-:d:1058562. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.