IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v15y2023i11p8893-d1161010.html
   My bibliography  Save this article

Experimental Study on the Negative Skin Friction of Piles in Collapsible Loess

Author

Listed:
  • Qing Chai

    (Lanzhou Engineering & Research Institute of Nonferrous Metallurgy Co., Ltd., No. 168 South Tianshui Road, Lanzhou 730000, China)

  • Tianlei Chen

    (Lanzhou Engineering & Research Institute of Nonferrous Metallurgy Co., Ltd., No. 168 South Tianshui Road, Lanzhou 730000, China)

  • Zuoyong Li

    (Institute of Port, Coastal and Offshore Engineering, Ocean College, Zhejiang University, Zhoushan 316021, China)

  • Danyi Shen

    (Institute of Port, Coastal and Offshore Engineering, Ocean College, Zhejiang University, Zhoushan 316021, China
    Institute of Geotechnical Engineering, College of Civil Engineering and Architecture, Zhejiang University, Hangzhou 310058, China)

  • Chuangzhou Wu

    (Institute of Port, Coastal and Offshore Engineering, Ocean College, Zhejiang University, Zhoushan 316021, China)

Abstract

The collapsible loess is widely distributed in western China. The special structure and water sensitivity of loess lead to the complex negative skin friction mechanism in pile foundations. Previous studies mainly focused on the negative skin friction of pile foundations and treatment measures, such as casing and coating methods. However, few studies have focused on the influence of the negative skin friction on the settlement and bearing capacity of piles in collapsible loess, especially environmentally friendly methods that can reduce the negative skin friction. In this study, a series of non-immersion and immersion experiments was conducted to investigate the settlement, axial force, and side friction resistance of piles in loess soil under controlled conditions. The results showed that under the non-immersion condition, the settlement of model piles increased with the increasing pile top load. The axial force gradually decreased along the pile length for piles without casing. The axial force attenuation of the casing section of casing piles was almost negligible due to the isolating frictional resistance effect of casing. The settlement of each soil layer increased with the increase in immersion time, and the process was divided into an initial gradual stage, rapid drop stage, and later gradual stage. Both negative and positive skin friction increased with the increasing immersion time and pile top load, and there was a neutral point. The maximum axial force of piles without casing exceeded the peak load at the pile top. The presence of steel casing reduced the failure of pile foundation in collapsible loess. The research results of this paper provide theoretical support for the application of piles in loess areas.

Suggested Citation

  • Qing Chai & Tianlei Chen & Zuoyong Li & Danyi Shen & Chuangzhou Wu, 2023. "Experimental Study on the Negative Skin Friction of Piles in Collapsible Loess," Sustainability, MDPI, vol. 15(11), pages 1-14, May.
  • Handle: RePEc:gam:jsusta:v:15:y:2023:i:11:p:8893-:d:1161010
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/15/11/8893/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/2071-1050/15/11/8893/
    Download Restriction: no
    ---><---

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:15:y:2023:i:11:p:8893-:d:1161010. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.