IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v13y2021i16p9330-d617730.html
   My bibliography  Save this article

Use of Sewage Sludge Ash in the Production of Innovative Bricks—An Example of a Circular Economy

Author

Listed:
  • Andelina Bubalo

    (Water Research Department, Faculty of Civil Engineering, University of Zagreb, 10000 Zagreb, Croatia)

  • Drazen Vouk

    (Water Research Department, Faculty of Civil Engineering, University of Zagreb, 10000 Zagreb, Croatia)

  • Nina Stirmer

    (Department of Materials, Faculty of Civil Engineering, University of Zagreb, 10000 Zagreb, Croatia)

  • Karlo Nad

    (Division of Experimental Physics, Ruđer Bošković Institute, 10000 Zagreb, Croatia)

Abstract

In this paper the properties of clay bricks with 5 wt%, 10 wt%, and 20 wt% sewage sludge ash (SSA) were studied and compared with the properties of control bricks made of 100% clay. Sewage sludge (SS) was collected at two wastewater treatment plants (WWTPs) in Croatia—WWTP Zagreb and WWTP Karlovac—and incinerated at a temperature of 900 °C The bricks were produced on a laboratory scale. A total of seven types of bricks were produced—control bricks and six types of bricks as combinations of different wt% of SSA generated from SS that was collected at two different WWTPs. The physical and mechanical properties of produced bricks were tested. Compressive strengths of bricks with 5 wt% SSA (54.0–54.5 N/mm 2 ) and 10 wt% SSA (50.2–51.0 N/mm 2 ) were higher compared to the control bricks (50.4 N/mm 2 ), while bricks with 20 wt% SSA (37.0–43.9) N/mm 2 ) had noticeably lower compressive strenght. The coefficient of saturation was lower for bricks with SSA compared to control bricks. The initial absorption values were more pronounced for SSA fractions of 20 wt%.

Suggested Citation

  • Andelina Bubalo & Drazen Vouk & Nina Stirmer & Karlo Nad, 2021. "Use of Sewage Sludge Ash in the Production of Innovative Bricks—An Example of a Circular Economy," Sustainability, MDPI, vol. 13(16), pages 1-18, August.
    • Handle: RePEc:gam:jsusta:v:13:y:2021:i:16:p:9330-:d:617730
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/13/16/9330/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2071-1050/13/16/9330/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Rafiu O. Yusuf & Zainura Zainon Noor & Moh'd Fadhil Moh'd Din & Ahmad H. Abba, 2012. "Use of sewage sludge ash (SSA) in the production of cement and concrete - a review," International Journal of Global Environmental Issues, Inderscience Enterprises Ltd, vol. 12(2/3/4), pages 214-228.
    2. Katarzyna Zabielska-Adamska, 2019. "Sewage Sludge Bottom Ash Characteristics and Potential Application in Road Embankment," Sustainability, MDPI, vol. 12(1), pages 1-14, December.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Faisal Amin & Safeer Abbas & Wasim Abbass & Abdelatif Salmi & Ali Ahmed & Danish Saeed & Muhammad Sufian & Mohamed Mahmoud Sayed, 2022. "Potential Use of Wastewater Treatment Plant Sludge in Fabrication of Burnt Clay Bricks," Sustainability, MDPI, vol. 14(11), pages 1-16, May.
    2. Mohammad Ghorbani & Petr Konvalina & Anna Walkiewicz & Reinhard W. Neugschwandtner & Marek Kopecký & Kazem Zamanian & Wei-Hsin Chen & Daniel Bucur, 2022. "Feasibility of Biochar Derived from Sewage Sludge to Promote Sustainable Agriculture and Mitigate GHG Emissions—A Review," IJERPH, MDPI, vol. 19(19), pages 1-23, October.
    3. Dinko Đurđević & Saša Žiković & Paolo Blecich, 2022. "Sustainable Sewage Sludge Management Technologies Selection Based on Techno-Economic-Environmental Criteria: Case Study of Croatia," Energies, MDPI, vol. 15(11), pages 1-23, May.
    4. Yuhang Shi & Qinyong Ma & Dongdong Ma & Kun Huang & Yuqi Gu, 2023. "Effect of Aggregate Mix Proportion on Static and Dynamic Mechanical Properties and Pore Structure of Alkali-Activated Slag Mortar with Sludge Pottery Sand," Sustainability, MDPI, vol. 15(3), pages 1-16, February.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Chaofeng Liang & Xinqian Le & Weijiong Fang & Jianming Zhao & Liuji Fang & Shaodan Hou, 2022. "The Utilization of Recycled Sewage Sludge Ash as a Supplementary Cementitious Material in Mortar: A Review," Sustainability, MDPI, vol. 14(8), pages 1-20, April.
    2. Gabriela Rutkowska & Marek Chalecki & Mariusz Żółtowski, 2021. "Fly Ash from Thermal Conversion of Sludge as a Cement Substitute in Concrete Manufacturing," Sustainability, MDPI, vol. 13(8), pages 1-14, April.
    3. Carmen Otilia Rusănescu & Gheorghe Voicu & Gigel Paraschiv & Mihaela Begea & Larisa Purdea & Ivona Camelia Petre & Elena Valentina Stoian, 2022. "Recovery of Sewage Sludge in the Cement Industry," Energies, MDPI, vol. 15(7), pages 1-10, April.
    4. Mohammad Ali Mosaberpanah & Stephen Babajide Olabimtan & Ayse Pekrioglu Balkis & Balikis Omotola Rabiu & Babatunde Olufunso Oluwole & Chibueze Sylvester Ajuonuma, 2024. "Effect of Biochar and Sewage Sludge Ash as Partial Replacement for Cement in Cementitious Composites: Mechanical, and Durability Properties," Sustainability, MDPI, vol. 16(4), pages 1-29, February.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:13:y:2021:i:16:p:9330-:d:617730. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.