IDEAS home Printed from https://ideas.repec.org/a/gam/jijerp/v18y2021i24p13289-d704178.html
   My bibliography  Save this article

Development of a Personal Ultrasound Exposimeter for Occupational Health Monitoring

Author

Listed:
  • Michal Cieslak

    (Physikalisch-Technische Bundesanstalt (PTB), 38116 Braunschweig, Germany)

  • Christoph Kling

    (Physikalisch-Technische Bundesanstalt (PTB), 38116 Braunschweig, Germany)

  • Andrea Wolff

    (Institut für Arbeitsschutz der Deutschen Gesetzlichen Unfallversicherung (IFA der DGUV), 53757 Sankt Augustin, Germany)

Abstract

Prolonged exposure to airborne ultrasound in a workplace can have a detrimental influence on a worker’s well-being. Given the ever-increasing use of ultrasonic industrial equipment, it is of vital importance—and may also be regulated by law—to monitor ultrasound exposure during a normal workday as part of workplace risk assessment. However, the devices currently utilized exhibit limitations with regard to both their operational frequency and their portability (wearability). In this paper, the first prototype of a high-frequency and ultrasound personal exposimeter is presented in the light of the latest national and international standards governing high-frequency and ultrasonic noise measurement in the field of occupational health monitoring. The prototype was tested in the laboratory environment in order to assess its sound level detection capabilities in both the audible and ultrasonic frequency ranges. Several common industrial scenarios—including an ultrasonic welding machine, an ultrasonic cleaning bath, and a compressed air gun—were simulated in a laboratory environment. For each simulated set-up, a corresponding high-frequency or ultrasonic signal was fed through a specially prepared generation chain. Each experimental scenario was initially surveyed with an ultrasound level meter previously tested up to 100 kHz. This was followed by a measurement with the prototype. For this study, the simulated sound signals varied between 10 kHz and 40 kHz on the frequency scale and between 60 dB and 90 dB in amplitude. The portability of the prototype, which may be required to be worn throughout an entire workday (e.g., 8 h), was also considered. All the experiments were performed on a customized ultrasound measurement set-up within a free-field environment located at the Physikalisch-Technische Bundesanstalt (PTB) in Braunschweig, Germany. Results obtained suggest a good agreement between the measurements performed with both devices in the louder areas of the sound fields produced. Because the overall measurement uncertainty is highly dependent on the specificity of the individual measurement set-up and measurement procedure, an uncertainty budget estimated for the prototype considers electro-acoustical contributions only.

Suggested Citation

  • Michal Cieslak & Christoph Kling & Andrea Wolff, 2021. "Development of a Personal Ultrasound Exposimeter for Occupational Health Monitoring," IJERPH, MDPI, vol. 18(24), pages 1-35, December.
  • Handle: RePEc:gam:jijerp:v:18:y:2021:i:24:p:13289-:d:704178
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1660-4601/18/24/13289/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/1660-4601/18/24/13289/
    Download Restriction: no
    ---><---

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jijerp:v:18:y:2021:i:24:p:13289-:d:704178. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.