IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v17y2024i8p1953-d1378963.html
   My bibliography  Save this article

Pyrogenic Carbonaceous Materials Production of Four Tropical Wood Produced by Slow Pyrolysis at Different Temperatures: Charcoal and Biochar Properties

Author

Listed:
  • Róger Moya

    (Escuela de Ingeniería Forestal, Instituto Tecnológico de Costa Rica, Cartago 159-7050, Costa Rica)

  • Carolina Tenorio

    (Escuela de Ingeniería Forestal, Instituto Tecnológico de Costa Rica, Cartago 159-7050, Costa Rica)

  • Jaime Quesada-Kimzey

    (Escuela de Química, Instituto Tecnológico de Costa Rica, Cartago 159-7050, Costa Rica)

  • Federico Másis-Meléndez

    (Escuela de Química, Centro de Investigación y de Servicio Químicos y Microbiológicos (CEQIATEC), Instituto Tecnológico de Costa Rica, Cartago 159-7050, Costa Rica)

Abstract

Costa Rica produces a considerable, important quantity of wood residues. This waste can be pyrolyzed to produce charcoals as main products that can be effectively used as an energy source or to immobilize carbon for soil treatment. However, there is a lack of information about the pyrogenic carbonaceous materials (PCMs), such as charcoal or biochar, obtained at different pyrolysis temperatures. Hence, this study aimed to evaluate the quality of PCMs (physical, mechanical, ultimate analysis, and FTIR analysis) and charcoal characteristics (energetic properties and thermogravimetric analysis—TGA) and biochar characteristics (conductivity, pH, initial contact angle, and wetting rates) for four tropical wood residues produced in five temperatures (300 °C, 350 °C, 400 °C, 450 °C, and 500 °C). In general, pyrolysis temperature between 450 °C and 500 °C produced charcoals with lower values of density, moisture content, compression strength, volatiles, H and O content, and higher values of C and ash contents, conductivity, pH, initial contact angle, and wetting rates. FTIR and TGA analyses show that celluloses and lignin are pyrolyzed at these temperatures, so these temperatures are recommended. The range of 300–350 °C is not recommended, as these parameters were inverse. Multivariate analysis shows that (i) PCMs obtained at lower temperatures (300–350 °C) from Dipteryx panamensis , Hieronyma alchorneoides , and Tectona grandis belong to a cluster with poorer properties, indicating that these temperatures are not adequate for pyrolysis of these species; (ii) all the PCMs obtained from Gmelina arborea were grouped into one cluster, suggesting different PCM quality; and (iii) the PCMs produced from D. panamensis , H. alchorneoides , and T. grandis at 400–500 °C were grouped into another cluster with better properties, suggesting this pyrolysis temperature range as the best for these species.

Suggested Citation

  • Róger Moya & Carolina Tenorio & Jaime Quesada-Kimzey & Federico Másis-Meléndez, 2024. "Pyrogenic Carbonaceous Materials Production of Four Tropical Wood Produced by Slow Pyrolysis at Different Temperatures: Charcoal and Biochar Properties," Energies, MDPI, vol. 17(8), pages 1-21, April.
  • Handle: RePEc:gam:jeners:v:17:y:2024:i:8:p:1953-:d:1378963
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/17/8/1953/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/1996-1073/17/8/1953/
    Download Restriction: no
    ---><---

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:17:y:2024:i:8:p:1953-:d:1378963. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.